• Special Issue of the Society of Naval Architects of Korea
• /
• 2006.09a
• /
• pp.71-76
• /
• 2006

Preliminary conceptual design of hulls is developed and a theoretical evaluation study performed for the comparison of the hull concepts. Systematic variation of the side hull location is carried out to find an optimum position of side hulls for a trimaran by CFD computation. In order to compare computed results, the model test of trimaran was carried out. Shallow water effect is considered due to the route which has critical water depth of 20m for the design speed and investigated on the condition of different speeds and water depth by the numerical computations.

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.193-199
• /
• 2000

This study is carried out the analysis of the runoff characteristics for the design of the interior drainage systems by SWMM in urbanization basin. The basin analyzed in this study is Bumuh-chun basin which is located in Susung-gu of Taegu city. Huff method is used for rainfall distribution analysis. The optimal rainfall duration in Bumuh-chun basin is analyzed as about 90 minutes decided from comparison of arrival time and critical duration. Flood flow variation pattern is proposed through the comparison of the results of peak flow and peak time analyzed by SWMM about pre-urbanization and post-urbanization of Bumuh-chun basin. It is known that the variation of arrival time caused by the rapid increase of pavement rate in the upper area shows about 20∼25 minutes faster than pre- urbanization. Therefore, the management of surface water for design of water supply and drainage, and channel alteration has to considered the variation of geological factors according to urbanization.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.163-171
• /
• 2003

The scope of the study involves comparison of theaters in the west and those in the east, which experienced almost no exchange between them in the past, due to diverse restrains including a geographical one. The focus was put on the two types of these theaters whose similarities are meager historically and technologically, and whose link was not verified yet. However, similarities ,if any, will be identified among characteristics of these theaters so that the links such as liberalism, nomadic and participatory nature, non-linear space, ambivalence, mobile space-which are modern characteristics- could be connected from the past to the present, and those modern characteristics can be studied as a process where they could be sensed from the past structure or from each different target.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.1
• /
• pp.47-59
• /
• 1993

Recently, Broadband ISDN(B-ISDN) has received increased attention as a communication architecture which can support multimedia applications. Also, Asynchronous Transfer Mode(ATM) is considered as a promising technique to transfer and switch various kinds of media, such as telephone speech, data and motion video. Comparisons among a variety of ATM switching systems which have already been proposed will provide quite useful information for the new ATM switching system design. To facilitate the comparison, we introduce the design requirements and classification criteria for the ATM switch, and propose a performance analysis model for the Banyan network which is the basic switching fabric of most multi-stage ATM switching systems. The model is based on the standard discrete-time Markov chain analysis and can be conveniently used for extensive Banyan network analysis. The computational results are also presented.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.3
• /
• pp.86-91
• /
• 2020

An important factor of rough road modeling is analyzing the shear behavior properties of the rough road. These properties influence the drawbar pull of the tool when interacting with the soil used in agriculture. Furthermore, shear behavior properties are important because sinkage and shear stress are generated when wheels drive on rough roads. In this study, we performed a direct shear test to investigate the shear behavior properties of soils and compare with the direct shear simulation; shear force derived by the coupled analysis of discrete element method; and multi-body dynamics. Soil contact parameters were measured in a wheel and soil contact simulation followed by comparison of the simulated and experimentally measured shear force.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.31-32
• /
• 2017

The Korea is conducted performance based on design according to fire fighting law in 2009, but it came out problems related to PBD consistently. Especially, there is no specific guideline or code related to evacuation safety verification. so it came out different results according to designer. This study is looking for each country criteria and suggest the basis data for Manual composition through comparison.

• Tunnel and Underground Space
• /
• v.4 no.1
• /
• pp.63-76
• /
• 1994

This paper discusses contents of the existing design, the behaviours prediction on the strut and retaining wall around subsurfaces, and also evaluates the measured results in comparison with the management criterion during excavation period of ventilation shaft at Pusan-Subway 220. Field measurements showed that maximum displacement 23.74 mm at boundary site of multistratification and the weathered rock to be formed at 0.2~0.6 H of total excavating depth(H), 68 ton of maximum axial force and 4.4X102 kg/cm2 of stress on strut. The measured axial force exceeds prediction levels by up to 50 percent at the weathered soil & rock, and the others come under the category of their levels. The great gap of both field measurements and prediction on behaviour makes a difference of the site situation at the design stage and the practical working. This measured value is greatly safety in comparison with that of the safety criterion, but axial force at 4~5 strut of ventilation shaft l is higher than the prediction.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.52-57
• /
• 1998

In this paper, we performed a design study of a thorium fueled reactor according to the design concept of the Radkowsky Thorium Reactor (RTR) and evaluated its overall performance. To enhance its performance and alleviate its problems, we introduced a new metallic uranium fuel, uranium-zirconium hydride (U-Zr $H_{1.6}$), as a seed fuel. For comparison, typical ABB/CE-type PWR based on SYSTBM 80+ and standard RTR-type thorium reactor were also studied. From the results of performance analysis, we could ascertain advantages of RTR-type thorium fueled reactor in proliferation resistance, fuel cycle economics, and back-end fuel cycle. Also, we found that enhancement of proliferation resistance and safer operating conditions may be achieved by using the U-Zr $H_{l.6}$ fuel in the seed region without additional penalties in comparison with the standard RTR's U-Zr fuelr fuelel

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1605-1607
• /
• 2000

In this paper, the design of class AB BiCMOS log-domain filter for low-voltage and low-power was proposed. This filter is consist of a log-domain integrator using folded junctions with capacitor connected to emitter and it's class AB structure. A comparison between the proposed class AB BiCMOS log-domain filter and classical class A BiCMOS log-domain filter is drawn on the basis of SNR, THD and the frequency response. This comparison shows proposed filter are more than good SNR, THD and frequency characteristics than more class A log-domain filter for low voltage and low power.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.10
• /
• pp.799-806
• /
• 1991

Utilizing dual basis, normal basis, and subfield representation, three different finite field multipliers are presented in this paper. First, we propose an extended dual basis multiplier based on Berlekamp's bit-serial multiplication algorithm. Second, a detailed explanation and design of the Massey-Omura multiplier based on a normal basis representation is described. Third, the multiplication algorithm over GF(($2^{n}$) utilizing subfield is proposed. Especially, three different multipliers are designed over the finite field GF(($2^{4}$) and the complexity of each multiplier is compared with that of others. As a result of comparison, we recognize that the extendd dual basis multiplier requires the smallest number of gates, whereas the subfield multiplier, due to its regularity, simplicity, and modularlity, is easier to implement than the others with respect to higher($m{\ge}8$) order and m/2 subfield order.