• 감성과학
• /
• 제9권spc3호
• /
• pp.243-249
• /
• 2006

최근 직물 디자이너를 위한 직물 디자인 CAD, 의류 디자이너를 위한 패턴 디자인 CAD와 같은 상업화된 많은 CAD 시스템이 운영되고 있다. 그러나 소재를 제직하는 직물 제직 공장에서 적용할 수 있는 직물 설계디자인 시스템은 아직까지 운영되고 있지 않다. 그래서 본 연구에서는 직물설계에 관한 데이터 베이스 시스템의 초기 연구로서 여러 가지 실의 번수, 직물조직, 원료소재에 따른 직물의 경사와 위사 밀도를 쉽게 결정할 수 있는 직물 디자인 시스템에 관한 연구를 직물공장에서 사용하고 있는 나일론과 폴리에스테르 등의 합섬직물 설계서를 분석하여 수행하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.531-535
• /
• 2002

This paper presents a real-time collaborative system for distributed design. The aim of the system is to provide designers with a virtual workspace where they can collaborate and exchange their design knowledge in distributed environment. The system consists of two subsequent modules. One is for the visualization of design data including CAD data, documents, images, and the other is real-time collaboration module. They make it possible for distributed designers to review the design data collaboratively and to share their design knowledge. The system was implemented by using the Internet protocols such as TCP/IP and IP multicast on the peer-to-peer based network. An example is presented and discussed to validate the proposed system.

• 인터넷정보학회논문지
• /
• 제2권4호
• /
• pp.25-32
• /
• 2001

ASIC 설계용으로 이미 개발된 여러 CAD 도구 또는 추후 개발될 CAD도구들은 고유의 기능을 가지고 있으며, 서로 다른 환경에서 상이한 방식으로 운영되는 경우가 많다. 따라서 목표하는 최종적인 결과를 도출하기 위한 작업을 수행하기 위해서는 상호 밀접한 관계가 있는 여러 CAD도구들을 하나의 시스템에 통합하여 운영할 수 있는 통합 CAD Framework의 사용이 효과적이다. 본 논문에서는 주로 Unix Shell 상에서 개발된 기존의 국내외 CAD도구들을 Unix 운영체계의 X-windows라는 규격화된 그래픽 인터페이스 상에서 통합하여 수행할 수 있게 하는 기법을 소개한다. 이를 위해 메뉴 구성 및 실행 환경 설정을 위한 각종 파일 양식과 메타 언어를 정의ㆍ개발하였으며, 성능 확인을 위해 기존에 개발되어 있던 두 가지 CAD 도구들을 제안된 CAD Framework상에 통합시킨 Prototype 시스템을 개발하고, 이를 토대로 테스트하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.154-160
• /
• 2006

건설산업분야에 CAD시스템이 도입된 이래 CAD로 작성된 도면으로부터의 물량산출에 관한 연구가 지난 20여 년간 많은 관심 속에 국내외 적으로 지속되어 왔으나, 성과는 그다지 만족스럽지 못하였다. 특히 3D CAD 시스템을 활용한 설계 및 물량산출은 제조업에서는 괄목할 만한 성과를 거두고 있음에도 불구하고 건설 산업에서는 3D CAD 시스템에 의한 물량산출시스템의 개발 및 운영에 많은 어려움이 있다. 3D CAD 시스템에서는 3D 라이브러리(3D Object)의 구축 및 활용이 매우 중요하며 건설 산업의 특성상 설계과정에서 발생하는 신규 부재(3D object)에 대한 신속한 지원이 없이는 설계 및 물량산출에 3D CAD 시스템의 활용에 많은 어려움이 있다. 또한 3D CAD 모델로 부터의 물량산출을 지원하는 시스템은 개념설계(schematic design)단계에서도 개략견적이 가능하여야 하며, 상세설계(detailed design) 단계 및 시공도면작성(construction design)단계에 이르는 각 단계마다 물량산출 및 비용 산출이 가능하여야 한다. 다음으로는 설계과정 및 의사결정단계를 거치면서 계속 진화하는 설계변경(revision)에 따라 유연하게 물량 및 비용 산출이 가능하여야 한다. 본 연구에서는 3D 모델을 기반으로 한 상용화된 5D(3D+cost+schedule) CAD 시스템인 컨스트럭터(Constructor)의 기본개념을 살펴보고 특히 레서피(Recipe)기반의 물량산출 모듈에 대한 설명 및 시범 프로젝트 적용결과에 대해 검토하고 앞으로의 기대효과 및 건설 산업에서의 3D CAD 기반 응용시스템 연구 방향에 대해 살펴보고자 한다.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.128-137
• /
• 2006

In this paper, a CAD/CAE integrated optimal design system is developed, in which design and analysis process is automated using CAD/CAE softwares for a complex model in which the modeling by parametric feature is not easy to apply. Unigraphics is used for CAD modeling, in which the process is automated by using UG/Knowledge Fusion for modeling itself and UG/Open API function for the other functions respectively. Structural analyses are also carried out automatically by ANSYS using the imported parasolid model. The developed system is applied for the PLS(Plasma Lighting System) consisting of more than 20 components, which is a next generation illumination system that is used to illuminate stadium or outdoor advertizing panel. The analyses include responses by static, wind and impact loads. As a result of analyses, tilt assembly, which is a link between upper and lower body, is found to be the most critical component bearing higher stresses. Experiment is conducted using MTS to validate the analysis result. Optimization is carried out using the software Visual DOC for the tilt assembly to minimize material volume while maintaining allowable stress level. As a result of optimization, the maximum stress is reduced by 57% from the existing design, though the material volume has increased by 21%.

• 복식문화연구
• /
• 제6권1호
• /
• pp.25-34
• /
• 1998

The researches on modern fashion design have more specific and multifactorial, and expressional approaches of designers become more deeverse too. And, at the present point time when the design itself extends actively throughout the world, there should be may studies that focus on the development of CAD system. This study research that computer adied design used in developing various design and variety training. Development of fashion design by using computers could contribute to the rapid composition of deverse researches on it. It is to be classified into three items, diagram, illustration, transformation in computer adied fashion design. The illustration could be color variation by using CAD system, and express correct form, adjustment, complement. It must be development as an expression of propaganda, having a artistic value of ganre. At the present point of time when the fashion design itself it needed development, there should be may studies that focus on development of fashion design by using computer. This study present diagram for practical side, and illustration for decorative side by using CAD system.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.27-33
• /
• 1996

In this study, a CAD/CAM system for axisymmetric deep drawing processes has been developed. An approach to the system is based on the knowledge based system. Under the environment of CAD/CAM software of Personal Designer, the system has been written in UPL. The geometries of intermediate and final object in deep drawing process, including processes parameters are input for the CAD/CAM system. The input data can be obtained from the results of Pro_Deep. The parts drawing of die sets for each process is generated in tool design module of the CAD/CAM system. Also. the die assembly drawings can be obtained. NC commands for machining of the part can be generated in the developed CAD/CAM system.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.157-169
• /
• 2002

In the initial stages of ship design, designers represent geometry, arrangement, and dimension of hull structures with 2D geometric primitives such as points, lines, arcs, and drawing symbols. However, these design information(‘2D geometric primitives’) defined in the drawing sheet require more intelligent translation processes by the designers in the next design stages. Thus, the loss of design semantics could be occurred and following design processes could be delayed. In the initial design stages, it is not easy to adopt commercial 3D CAD systems, which have been developed f3r being used in detail and production design stages, because the 3D CAD systems require detailed input for geometry definition. In this study, a semantic product model data structure was proposed, and an initial structural CAD system was developed based on the proposed data structure. Contents(‘product model data and design knowledges’) of the proposed data structure are filled with minimal input of the designers, and then 3D solid model and production material information can be automatically generated as occasion demands. Finally, the applicability of the proposed semantic product model data structure and the developed initial structural CAD system was verified through application to deadweight 300,000ton VLCC(Very Large Crude oil Carrier) product modeling procedure.

• 한국CDE학회논문집
• /
• 제4권4호
• /
• pp.327-338
• /
• 1999

In this paper, we propose the framework of an integrated design system as a CAD system of a new concept that can incorporate the design information. Current CAD systems are powerful in representing the shape of a product with solid models but cannot provide the design information that is used or created in designing the product. Therefore an integrated design system is proposed to enable the storage and usage of the design information in addition to the shape manipulation. In order to represent the design information, we define element object that represents design element such as a part, a sub-assembly or an assembly by using object-oriented methodology. The element object carries various design information such as design parameters, documents, catalogues, functions, and behaviors as well as shapes. By using the stored information, the system can provide a designer with some functions to assist design activity such as interrogating necessary information, setting design parameters and goals, and constructing constraints among design elements. A mailing system is also constructed among element objects to assist a collaborative design. In addition, an evolutionary design method using genetic algorithms is realized within the proposed framework.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1424-1428
• /
• 2005

This paper describes a dedicated three-dimensional CAD system for design of drawing dies for automotive body panels. Since solid die models are useful not only for simulations for design verification, but also for NC tool path generation to machine dies and their Styrofoam patterns, 3-D CAD systems have been introduced in the tooling shop of automotive manufacturers. However, the work to build solid models requires a lot of time and effort if the designer uses only the general modeling capabilities of commercial 3-D CAD systems. To solve this problem, we customized a 3-D CAD system for the drawing die design. The system provides not only 3-D design capabilities, but also standard part libraries to enhance design productivity. By introducing this system, the drawing dies can be designed more rapidly in the 3-D space, and their solid data can be directly transferred to CAM tools for NC tool path generation and simulation tools for virtual manufacturing