• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.237-243
• /
• 2007

In this paper, we propose the Real-time Dead-Pixel Detection and Compensation System for mobile camera and its hardware architecture. The CMOS image sensors as image input devices are becoming popular due to the demand for miniaturized, low-power and cost-effective imaging systems. However a conventional Dead-Pixel Detection Algorithm is disable to detect neighboring dead pixels and it degrades image quality by wrong detection and compensation. To detect dead pixels the proposed system is classifying dead pixels into Hot pixel and Cold pixel. Also, the proposed algorithm is processing line-detector and $5{\times}5$ window-detector consecutively. The line-detector and window-detector can search dead pixels by using one-dimensional(only horizontal) method in low frequency area and two-dimensional(vertical and diagonal) method in high frequency area, respectively. The experimental result shows that it can detect 99% of dead pixels. It was designed in Verilog hardware description language and total gate count is 23K using TSMC 0.25um ASIC library.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.83-93
• /
• 2013

Recently, the SURF algorithm, which is conjugated for object tracking system as part of many computer vision applications, is a well-known scale- and rotation-invariant feature detection algorithm. The SURF, due to its high computational complexity, there is essential to develop a hardware accelerator in order to be used on an IP in embedded environment. However, the SURF requires a huge local memory, causing many problems that increase the chip size and decrease the value of IP in ASIC and SoC system design. In this paper, we proposed a way to design a SURF algorithm in hardware with greatly reduced local memory by partitioning the algorithms into several Sub-IPs using external memory and a DMA. To justify validity of the proposed method, we developed an example of simplified object tracking algorithm. The execution speed of the hardware IP was about 31 frame/sec, the logic size was about 74Kgate in the 30nm technology with 81Kbytes local memory in the embedded system platform consisting of ARM Cortex-M0 processor, AMBA bus(AHB-lite and APB), DMA and a SDRAM controller. Hence, it can be used to the hardware IP of SoC Chip. If the image processing algorithm akin to SURF is applied to the method proposed in this paper, it is expected that it can implement an efficient hardware design for target application.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.166-180
• /
• 2000

Recommendations of ITU-T and ISO stipulate the managerial abstraction of static and dynamic characteristics of network elements, management functions as well as management communication protocol. The current recommendations provide the formal mechanism for the structural parts of managed objects such as managed object class and attributes. But the current description method does not provide the formal mechanism for the behavioral characteristics of managed objects in clear manner but in natural language form, the complete specification of managed objects is not fully described. Also, the behaviour of managed objects is affected by their temporal and active properties. While the temporal properties representing periodic or repetitive internals are to describe managed objects behaviour in rather strict way, it will be more powerful if more dynamic temporal properties determined by external conditions are added to managed objects. In this paper, we added dynamic features to scheduling managed objects, and described, in GDMO, scheduling managed objects that support dynamic features. We also described behaviour of managed objects in newly defined BDL that has dynamic temporal properties. This paper showed that dynamic temporal managed objects provide a systematic and formal method in agent management function model.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1821-1841
• /
• 1997

This paper presents an automated protocol conformance test sequence generation based on formal methods for LOTOS specification by using and applying many existing related algorithms and technique, such as the testing framework, Rural Chinese Postman tour concepts. We use the state-transition graphs obtained from LOTOS specifications by means of the CAESAR tool. This tool compiles a specification written in LOTOS into an extended Petri net, from which a transition graph of a event finite-state machine(EvFSM) including data is generated. A new characterizing sequence(CS), called Unique Event sequence(UE sequence) is defined. An UE sequence for a state is a sequence of accepted gate events that is unique for this state. Some experiences about UE sequence, partial UE sequence and signature are also explained. These sequences are combined with the concept of the Rural Chinese Postman Tour to obtain an optimal test sequence which is a minimum cost tour of the reference transition graph of the EvFSM. This paper also presents a fault coverage estimation experience of an automated method for optimized test sequences generation and the translation of the test sequence obtained by using our tool to TTCN notation are also given. A prototype of the proposed framework has been built with special attention to real application in order to generated the executable test cases in an automatic way. This formal method on conformance testing can be applied to the protocols related to IN, PCS and ATM for the purpose of verifying the correctness of implementation with respect to the given specification.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.23-28
• /
• 2017

Purpose Recently, there has been increasing demands for clinical departments at Asan Medical center in Seoul. They want to see the results of lab tests about blood samples as soon as possible and to be reported to them on the day. As the main contents of the survey, we explained the goodness of Asan medical center's in vitro and the points to be improved. Based on this, it became an opportunity to create a positive image of In vitro laboratory. In addition, we could identify their specific requirements through the surveys. Materials and Methods In September 2016, a total of 14 questionnaire surveys were conducted for 49 clinical departments and outpatient nurses at Asan Medical center in Seoul. The survey consists of description questions to be able to express the intention of the individual and the questions made on the Likert 4 point scale. The main contents of 14 questions are composed of goodness of In Vitro laboratory and points to be improved. Results 62% answered that the best service in In Vitro laboratory was "good accuracy and reproducibility". On the other hand, as an inconvenience when requesting blood tests, 73% pointed out that "the result report time was long", which was recognized as a part to be improved. There are many contents that "The result of all tests is reported within 2 hours" on the day of the examination. In the question - 'Are there some examination results which do not coincide well with clinical observations?', 55 of 56 people answered "no". Above all, the majority answered that waiting for re-examination results is too long. This problem must be causing discomfort to the patients. Conclusion In order to improve these problems, the first thing is to increase the number of blood tests by using the current personnel, equipments and reagents to the fullest by item in Asan Medical Center's Nuclear medicine in vitro part. Secondly, in case of re-examinations, we use the "AMIS message" to show other clinical departments the reporting time. This methode improves the efficiency of work with nurses and increases satisfaction of custom service. Thirdly, the correlation was evaluated by selecting the test species that can be carried out by the shortening method. Currently, C-peptide and insulin are implemented in the reaction process to shorten 2 hours into 1 hour. Finally, we are considering purchasing new equipments for quick test results.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.4
• /
• pp.453-461
• /
• 2019

Intraoperative neurophysiological monitoring (INM) examination identifies the damage caused to the nervous system during surgery. This method is applied in various surgeries to validate the procedure being performed, and proceed with confidence. The assessment is conducted in an operating room, using subdermal needle electrodes to optimize the examination. There are no textbooks or guides for the correct stimuli and recording areas for the surgical laboratory test. This article provides a detailed description of the correct stimuli and recording parts in motor evoked potential (MEP), somatosensory evoked potential (SSEP), brainstem auditory evoked potentials (BAEP) and visual evoked potentials (VEP). Free-running Electromyography (EMG) is an observation of the EMG that occurs in the muscle, wherein the functional state of most cranial nerves and spinal nerve roots is determined. In order to help understand the test, an image depicting the inserting subdermal needle electrodes into each of the muscles, is attached. Furthermore, considering both the patient and the examiner, a safe method is suggested for removal of electrodes after conclusion of the test.

• Journal of KIISE:Software and Applications
• /
• v.28 no.3
• /
• pp.211-223
• /
• 2001

본 논문에서 제안하는 시나리오기반 검증기법의 목적은 UML로 작성된 객체지향 분석모델의 완전성 및 일관성을 진단하는 것이다. 검증기법의 전체 절차는 요구분석을 위한 Use Case 모델링 과정에서 생성되는 Use Case 시나리오와 UML 분석모델로부터 역공학적 방법으로 도출된 객체행위 시나리오와의 상호참조과정 및 시나리오 정보트리 추적과정을 이용하여 단계적으로 수행된다. 본 검증절차를 위하여 우선, UML로 작성된 객체지향 분석모델들은 우선 정형명세언어를 사용하여 Use Case 정형명세로 변환하다. 그 다음에, Use Case 정형명세로부터 해당 Use Case 내의 객체의 정적구조를 표현하는 시나리오 정보트리를 구축하고, Use Case 정형명세 내에 포함되어 있는 객체 동적행위 정보인 메시지 순차에 따라 개별 시나리오흐름을 시나리오 정보트리에 표현한다. 마지막으로 시나리오 정보트리 추적과 시나리오 정보 테이블 참조과정을 중심으로 완전성 및 일관성 검증작업을 수행한다. 즉, 검증하고자 하는 해당 Use Case의 시나리오 정보트리를 이용한 시나리오 추적과정을 통해 생성되는 객체행위 시나리오와 요구분석 과정에서 도출되는 Use Case 시나리오와의 일치여부를 조사하여 분석모델과 사용자 요구사양과의 완전성을 검사한다. 그리고, 시나리오 추적과정을 통해 수집되는 시나리오 관련종보들을 가지고 시나리오 정보 테이블을 작성한 후, 분석과정에서 작성된 클래스 관련정보들의 시나리오 포함 여부를 확인하여 분석모델의 일관성을 검사한다. 한편, 본 논문에서 제안하는 검증기법의 효용성을 증명하기 위해 대학의 수강등록시스템 개발을 위해 UML을 이용해 작성된 분석모델을 특정한 사례로써 적용하여 보았다. 프로세싱 오버헤드 및 메모리와 대역폭 요구량 측면에서 MARS 모델보다 유리함을 알 수 있었다.과는 본 논문에서 제안된 프리페칭 기법이 효율적으로 peak bandwidth를 줄일 수 있다는 것을 나타낸다.ore complicate such a prediction. Although these overestimation sources have been attacked in many existing analysis techniques, we cannot find in the literature any description about questions like which one is most important. Thus, in this paper, we quantitatively analyze the impacts of overestimation sources on the accuracy of the worst case timing analysis. Using the results, we can identify dominant overestimation sources that should be analyzed more accurately to get tighter WCET estimations. To make our method independent of any existing analysis techniques, we use simulation based methodology. We have implemented a MIPS R3000 simulator equipped with several switches, each of which determines the accuracy level of the

• The Korean Journal of Archival Studies
• /
• no.25
• /
• pp.233-278
• /
• 2010

An interest in various description of history was increased, resolutely breaking away from the existing frame also in a historical science world, under the influence of post-modernism arisen from the mid 20th century, and for this, oral history archives and oral history methodology began to attract the attention in various academia including archival science as a method for a new writing of history. Also, under the circumstance of korea having a difficulty in performing a whole reconstruction of modern age history and a liquidation of past affairs due to an absolute lack of archives, the tendency is toward more active management of oral history archives and establishing oral history archives in the context of an excavation of new archives and a reinterpretation of history, owing to the necessity in a particular situation. This article started with a critical mind regarding an absence of a collecting policy which can help an effective development of collection from a point of view of archival science, with regard to oral history archives that recently shows a rapid increase of an interest. For this, this article intended to present an new element of a collecting policy besides the study on a collecting policy performed meanwhile by an archival science world by noticing a characteristic and a collecting method of oral history archives, this can be examined largely through 'a statement of mission and collection purpose', 'a policy of collection at large', 'a definition of maintenance and use of the holdings', and 'a guide for a development of collection', and add a proposal regarding a plan to embody the parr which should be actually applied to collection of oral history archives among the existing constituents.

• International Journal of Computer Science & Network Security
• /
• v.24 no.7
• /
• pp.128-142
• /
• 2024

Creation and implementation of export-oriented strategy is an urgent issue of economic development of any country. In an export-oriented model of economic development, exports should be a means of promoting economic growth and a tool to strengthen existing and potential competitive advantages. Agricultural production is the key factor in exports and the source of foreign exchange earnings in many countries. However, the export potential of agricultural producers may be inefficiently fulfilled due to the heterogeneity of countries in terms of economic development, trade relations and border policy. The aim of the research is to study the nature, main trends and problematic aspects of fulfilling the export potential of agricultural production in the context of aggravating food crisis. The study involved general scientific methods (induction and deduction, description, analysis, synthesis, generalization) and special (statistical method, economic analysis, descriptive statistics and interstate comparisons, graphical method). The need to ensure food security by countries around the world urges the importance of the agricultural sector as a catalyst for economic development, sources of foreign exchange earnings, investment direction, etc. The study of agricultural specialization led to the conclusion that wheat and sugar are goods with the highest export potential. It is substantiated that the countries of South America, OECD, North America and Europe have the highest level of realization of export potential of agricultural production, and African countries are import-dependent. In addition, the low export orientation of Africa and Asia due to the peculiarities of their natural and climatic conditions is established based on the assessment of export-import operations in the regional context. The internal and external export potential of each of the regions is analysed. Economic and mathematical simulation of assessing the impact of the most important factors on the wheat exports volumes was applied, which allowed predicting wheat exports volume and making sound management decisions regarding the realization of the export potential of agricultural companies. The inverse correlation between the exports volume and wheat consumption per capita, and the direct correlation between the effective size and area of land used for wheat cultivation was established through the correlation and regression analysis.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.9-17
• /
• 2017

Purpose: The tissue description and electron density indicated by the Computed Tomography(CT) number (also known as Hounsfield Unit) in radiotherapy are important in ensuring the accuracy of CT-based computerized radiotherapy planning. The internal metal implants, however, not only reduce the accuracy of CT number but also introduce uncertainty into tissue description, leading to development of many clinical algorithms for reducing metal artifacts. The purpose of this study was, therefore, to investigate the accuracy and the clinical applicability by analyzing date from SMART MAR (GE) used in our institution. Methode: and material: For assessment of images, the original images were obtained after forming ROIs with identical volumes by using CIRS ED phantom and inserting rods of six tissues and then non-SMART MAR and SMART MAR images were obtained and compared in terms of CT number and SD value. For determination of the difference in dose by the changes in CT number due to metal artifacts, the original images were obtained by forming PTV at two sites of CIRS ED phantom CT images with Computerized Treatment Planning (CTP system), the identical treatment plans were established for non-SMART MAR and SMART MAR images by obtaining unilateral and bilateral titanium insertion images, and mean doses, Homogeneity Index(HI), and Conformity Index(CI) for both PTVs were compared. The absorbed doses at both sites were measured by calculating the dose conversion constant (cCy/nC) from ylinder acrylic phantom, 0.125cc ionchamber, and electrometer and obtaining non-SMART MAR and SMART MAR images from images resulting from insertions of unilateral and bilateral titanium rods, and compared with point doses from CTP. Result: The results of image assessment showed that the CT number of SMART MAR images compared to those of non-SMART MAR images were more close to those of original images, and the SD decreased more in SMART compared to non-SMART ones. The results of dose determinations showed that the mean doses, HI and CI of non-SMART MAR images compared to those of SMART MAR images were more close to those of original images, however the differences did not reach statistical significance. The results of absorbed dose measurement showed that the difference between actual absorbed dose and point dose on CTP in absorbed dose were 2.69 and 3.63 % in non-SMRT MAR images, however decreased to 0.56 and 0.68 %, respectively in SMART MAR images. Conclusion: The application of SMART MAR in CT images from patients with metal implants improved quality of images, being demonstrated by improvement in accuracy of CT number and decrease in SD, therefore it is considered that this method is useful in dose calculation and forming contour between tumor and normal tissues.