• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.277-284
• /
• 2004

Low carbon steels containing Si of up to $1.2\;wt\%$ were oxidized in air at 1373 K and 1523 K, i.e. below and above the eutectic temperature of FeO and $Fe_2SiO_4$. The influence of a impurity element, S on behavior of scale formation during oxidation was investigated by using $M\"{o}chssbauer$ spectroscopy and EDS. This allowed establishment of an interface oxidation model of Si-added steel depending on temperature and an impurity element. A compound of FeO and FeS was formed in the scale/matrix interface of low carbon steels containing S of up to $0.03\;wt\%$ oxidized above 1213 K of the eutectic temperature. This was flat formed between $Fe_2SiO_4$ nodules along the scale/matrix interface without selective oxidation. It is due to low viscosity and high wettability of the compound of FeO and FeS in liquid. Conventional metallographic examinations revealed that roughness of the scale/matrix interface in Si-added steels became flat as the content of S increased. It was independent of oxidizing temperature and Si content. Effects of oxidizing temperature and an impurity element content on descaling characteristics in Si-added steels were evaluated by using a hydraulic descaling simulator. Good descaling characteristics was attributable to this flatness of the scale/matrix interface.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.180-186
• /
• 2000

This paper presents a new winding method in the electronic descaling(ED) technology. The ED technology Produces an oscillating electric field via the Faraday's law to Provide necessary molecular agitation to dissolved mineral ions. But present method gives another agitation force to mineral ions, which is Lorentz's force. Experiments were peformed at various Renolds number. A series of tests was conducted, measuring pressure drop across test section and the overall heat transfer coefficient as a function of time. In order to accelerate the rate of fouling, artificial hard water of 1000ppm $CaCO_3$ was used throughout the tests. The results show that the new method accelerates collision of mineral ions and improvs efficiency of system.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.870-878
• /
• 2003

The scale is removed from the strip by high pressure hydraulic descaling at the FSB (Finishing Scale Breaker). Recently, the spray height of nozzle has a trend to be shorter for the purpose of increasing the impact pressure by the high pressure water jet. Here, the nozzle intervals should be decided after considering the impact pressure and the temperature distribution on the strip. In other words, the minimum of impact pressure at the overlap of spray influences the surface grade of the strip due to scale and the overlap distance of the spray affects the temperature variation in the direction of the width of strip. In the present study, the impact pressure of the high pressure water jet is measured by the hydraulic descaling system and calculated with regard to the lead angle of 15$^{\circ}$ and the offset angle of 15$^{\circ}$, and then the temperature distribution and the temperature variation are calculated at the overlap distances of 0 mm, 10 mm, 20 mm, and 30 mm, respectively. The method of setting nozzle intervals is shown by utilizing these results.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.658-665
• /
• 2002

This paper presents a new winding method in electronic descaling (ED) technology. Conventional ED technology Produces an oscillating electric field via Faraday's law to provide the necessary molecular agitation to dissolve mineral ions. However, the proposed method produces an additional agitation force for mineral ions, called Lorentz's force. Experiments were performed using various Renolds numbers. A series of tests was conducted to measure the pressure drop across the test section and the overall heat transfer coefficient as a function of time. In order to accelerate the rate of fouling, artificial hard water, 1000ppm CaCO$_3$, was used throughout the tests. The results show that the new winding method accelerates the collision of the mineral ions, thereby improving the system efficiency. The present study can develope more effective fouling-removing equipment with change of estabishment method of coil.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.285-293
• /
• 2004

Oxidation behavior of 304 and 430 stainless steel were studied using thin film X-ray analysis and glow discharge spectrum analysis (here-after GDS). The oxidation layer of 304 stainless steel was composed of $Cr_2O_3\;and\;FeCrO_4$ and its thickness was about $1.5{\mu}m$ after $1\~5$ minutes of annealing at $1120^{\circ}C$ open air. However, the oxidation layer of 430 stainless steels was mainly composed of $Cr_2O_3$ and its typical thickness was 0.5um after $1\~5$ minutes of annealing at $1000^{\circ}C$ open air. Electro-chemical analysis revealed that the descaling of oxidation layer could be activated by Fe, Cr dissolution from the matrix behind the oxidation layer at the current density of $5\~10ASD$ and by Fe, Cr-oxide dissolution from the oxidation layer at the current density over than 10ASD. Electrolytic stripping of 430 and 304 revealed the intial incubation period of descaling by oxygen evolving at low current density range such as $5\~10ASD$. However the dissolution of oxide layer was occurred when applying the anodic current of $10\~20ASD$ on 430 and 304 stainless steels. It was suggested that the electrolytic pickling of high Cr bearing stainless steel such as 430 and 304 seemed to be the more effective in the high current density range such as $10\~20ASD$ than the low current density range such as $5\~10ASD$.

• 대한전기학회논문지
• /
• 제38권4호
• /
• pp.307-315
• /
• 1989

본 논문에서는 열간압연공정중 소재가 가열로에서 추출되어 조압연 공정을 마치기 까지 소재인 slab의 온도변화추이를 해석키 위하여 rolling process 상에서 온도에 영얄을 미치는 인자인 1) 대기중 복사 및 대류에 의한 냉각 2) 소성가공발열 3) descaling water에 의한 수냉각 4) rolling roll, 운반 roll과의 접촉냉각등 제요인에 관한 사항을 rolling process 상에서의 문제로 평가도입하여 해석하고저 하는 slab 표면에서의 경계조건 설정과 관련한 적용기법을 정립하였고 소재의 냉각 현상을 two dimensional transient heat flow문제로 취급, 유한차분방정식을 이용하여 해석하는 과정과 관련 rollinh작업을 sequence화 하여 적용하는 기법을 제시하였다. simulation 결과 계산치와 실계측편차 (${\pm}18^{\circ}C$)범위내에서 일치함을 제시하였고 또한 rolling event 별로 나타나는 온도하강 pattern이 실제의 압연상황과 잘 일치함을 제시하므로서 본 computer simulation 과정에서 적용한 가정, 조건, 물성치 등의 적정성 등을 입증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.174-177
• /
• 2000

본 논문에서는 높은 압축률과 고음질을 제공하는 MPEG-1 Layer Ⅲ 오디오 디코더를 고정소수점 DSP인 TMS320C6201을 이용하여 실시간으로 동작하도록 구현하였다. ISO/IEC에서 제공하는 부동소수점 C 프로그램을 음질의 손실 없이 고정소수점 연산으로 변환하었고 실시간 동작을 위하여 최적화 작업을 수행하였다. 연산의 정확성을 높이기 위해서 Descaling 모듈에 중점을 두어 부동소수점 연산을 고정소수점 연산으로 변환하였고 IMDCT 모듈과 Synthesis Polyphase Filter Bank 모듈에 대해 고속 알고리즘을 적용하여 연산량과 프로그램 크기를 크게 줄일 수 있었다. 구현된 디코더는 TMS320C6201 DSP가 수행할 수 있는 최대 연산량의 26%만으로 실시간 동작이 가능하였고 부동소수점 연산 결과와 고정소수점 연산 결과를 비교하여 60 dB 이상의 높은 SNR을 가짐을 확인하였다. 또한 사운드 입출력과 호스트 통신을 통하여 EVM 보드에서 실시간으로 동작함을 확인하였다.

• 한국통신학회논문지
• /
• 제25권8B호
• /
• pp.1460-1468
• /
• 2000

본 논문에서는 고정소수점 DSP인 TMS320C6201을 이용하여 MPEG-1 Layer III 오디오 디코더를 실시간으로 동작하도록 구현하였다 음질의 손실 없이 부동소수점 연산을 고정소수점 연산으로 변환하였으며 적은 메모리를 사용하여 동작하도록 소스프로그램을 최적화하였다 특히 연산의 정확성을 위해서 Descaling 모듈에서 중점적으로 부동소수점 연산을 고정소수점 연산으로 변환하여UT고 연산량과 프로그램 크기를 줄이기 위해서 IMDCT 모듈과 Synthesis Polyphase Filter Bank 모듈에 대해서 최적화 작업을 수행하였다 그 결과 구현된 디코더는 TMS320C6201 DSP가 수행할 수 있는 최대 연산량의 26% 만으로 실시간 동작이 가능하여UT으며 사용된 프로그램 ROM의 크기는 3.13 kWord 데이터 RAM의 크기는 9.94 kWord 이었다 부동소수점 프로그램의 최종 출력 PCM값과 구현된 고정소수점 연산의 최종 출력 PCM값을 비교하여 60 dB 이상의 높은 SNR를 가짐을 확인함으로써 고정소수점 연산의 정확성을 검증하였다. 또한 EVM 보드에서 사운드 입출력과 호스트(PC) 통신을 이용하여 실시간으로 동작함을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.412-422
• /
• 1999

Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

• 대한전자공학회논문지SD
• /
• 제47권5호
• /
• pp.1-9
• /
• 2010

이 논문에서는, 풀 HD 영상을 실시간에 처리가능한 새로운 화면 내 예측 및 DCTQ 하드웨어구조를 제안한다. 화면내 예측,.$4{\times}4$ 을 처리하기 위한 예측과 변환, 양자화, 역양자화, 역변환및 복원의 전체 cycle 을 줄일 수 있는 방법을 제안한다. $4{\times}4$ 예측 부호화 cycle을 줄이기 위해, 양자화과정을 예측 사이클에서 적용할 수 있도록 하였으며, 회로의 크기를 줄이기 위하여 9가지 모드 중 2개의 모드를 먼저 선택하는 알고리듬을 사용하였다. 또한 $16{\times}16$ 예측과 $8{\times}8$ 예측 과정를 하나의 코어를 이용하여 설계하므로 크기를 줄였다. 제안된 구조는 108Mhz 클럭에서 full HD영상을 30frame/sec에서 동작하며, 한 매크로블록의 처리 cycle 은 425 cycle이다.