• Journal of the Korean Geotechnical Society
• /
• v.25 no.6
• /
• pp.17-29
• /
• 2009

There has been an increase in the investigation of deep sea sediments with a consequent increase in the amount of energy required to undertake these investigations. The geotechnical characteristics of Ulleung Basin sediment are explored by using depressurized specimens following methane production tests carried out on pressured core samples obtained at 2,100 m water depth and 110 m below sea floor. Geotechnical index tests, X-ray diffraction, and scanning electron microscope are conducted to identify the geotechnical index parameters, clay mineralogy, chemical composition, and microstructure of the sediments. Compressibility, and elastic and electromagnetic wave parameters are investigated for two samples by using a multi sensing instrumented oedometer cell. The strength chatracteristics are obtained by the direct shear tests. The dominant clay minerals are mostly kaolinite, illite, chlorite, and calcite. The SEM shows a well-developed flocculated structure of the microfossil. Void ratio, electrical resistivity, real permittivity, conductivity, and shear wave velocity show bi-linear behavior with the effective vertical stress: as the vertical effective stress increases. The friction angle obtained by the direct shear test is about $21^{\circ}$, which is similar to the value observed in the Ulleung Basin sediments. This study shows that the understanding of the behavior acting on the diatomaceous marine sediment is important because it often maintains the useful energy resources such as gas hydrate and so will be the new engineering field in the next generation.

• Journal of Korea Trade
• /
• v.26 no.5
• /
• pp.56-75
• /
• 2022

Purpose - This study examines the influencing factors of China's cross-border e-commerce exports in the context of the current situation and trends of China's cross-border e-commerce development. Through an improved trade gravity model, it provides more in-depth research and constructive opinions on the development of cross-border e-commerce in China. In this paper, factors such as consumption gap, volume of trade frictions, number of tourists, Internet usage and trade openness are added to the formula of the traditional trade gravity model in the improved trade gravity model to examine the influencing factors on China's cross-border e-commerce exports. Design/methodology - According to the empirical analysis, China's cross-border e-commerce exports to ten countries are used as dependent variables, and consumption gap, trade friction volume, trade distance, trade openness and number of Internet users are taken as independent variables. Regression analysis is conducted through a modified gravity model to test whether the hypotheses hold. Findings - The analysis shows that the hypothesis that China's cross-border e-commerce exports are influenced by trade openness, trade distance, consumption gap between trade parties, and the number of Internet users in the importing country is supported by these four hypotheses, but not all independent variables have an impact on them. Specifically, the number of travelers, trade frictions do not have an impact on China's cross-border e-commerce. That is to say, trade friction between China and the United States and political issues such as China-India and China-Japan territorial disputes that emerged before do not affect the development of cross-border e-commerce in China. Originality/value - The analysis shows that the factors influencing China's cross-border e-commerce exports are the trade openness of the importing country, the trade distance, the number of Internet users in the importing country, and the consumption gap between the two sides of the trade. The trade openness and the number of Internet users positively contribute to China's cross-border e-commerce, while the consumption gap and trade distance are negatively related to them. And the analysis found that the Sino-US trade war and the Sino-Indian territorial disputes and other trade frictions to China's cross-border e-commerce exports did not have a substantial impact.

• The Mathematical Education
• /
• v.61 no.2
• /
• pp.323-338
• /
• 2022

The purpose of this study are to analyze how well middle and high school students understand the concept definition of quadrangle and to explore the phenomenon about their concept image. A test tool was developed and 60 8th graders, 63 9^th graders and 65 10^th graders were tested, and some students who needed in-depth analysis were interviewed. The results are as follows. First, it cannot be said that understanding level of the concept definition of the quadrangle naturally improves as the grade level goes up. Particularly, it was found that the understanding of the definition of the rhombus is the lowest in all three grades compared to other quadrangle. Second, although female students understood the definition of square better than male students, the understanding level of the definition of trapezoid, parallelogram, rhombus, and rectangle did not differ by gender. Third, it was found that the students who did not understand the concept definition of the quadrangle were more and more influenced by the concept image as the grade level went up. Fourth, it showed that a tendency to be less influenced by the concept definition and more influenced by textbooks and teachers as the grades go up when students form a concept image.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.4
• /
• pp.293-301
• /
• 2019

Soft tissue masses of the extremities and torso are a common problem encountered by orthopaedic surgeons. Although these soft tissue masses are often benign, orthopaedic surgeons need to recognize the key features differentiating benign and malignant masses. An understanding of the epidemiology and clinical presentation of soft tissue masses is needed to develop a practical approach for evaluation and surgical management. Size and depth are the two most important factors on which triage decisions should be based. In a differential diagnosis of a tumor, it is important to know the characteristics of the soft tissue mass through detailed history taking and physical examinations before the diagnostic procedures. A variety of imaging studies, such as simple radiography, ultrasound, magnetic resonance imaging, positron emission tomography, computed tomography, bone scan, and angiography can be used to diagnose tumors. Know the ledge of advantages and disadvantages of each imaging study is essential for confirming the characteristics of the tumor that can be observed in the image. In particular, ultrasonography is convenient because it can be performed easily in an outpatient clinic and its cost is lower than other image studies. On the other hand, the accuracy of the test is affected by the skill of the examiner. A biopsy should be performed to confirm the tumor and be performed after all imaging studies have been done but before the final treatment of soft tissue tumors. When a biopsy is to be performed, careful attention to detail with respect to multidisciplinary coordination beforehand, cautious execution of the procedure to minimize complications, and expedient follow-up and referral to a musculoskeletal oncologist when appropriate, are essential.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.31-41
• /
• 2016

This study was conducted to develop a handy earth auger for use in sloppy and rugged forest terrains in order to reduce labor cost which comprises a major part of the production costs in forest afforestation projects. The first prototype is developed consist of two parts, the soil-digging screw and the battery power source. The specifications of the first prototype screw are: length of 170mm, a top diameter of 60mm, bottom diameter of 47mm, 23° angle for each helix, and a 50mm awl-head tip. The use of a single line of screw was selected for reduced weight. In addition, a power source of rotary DC Motor(WD-6G2425, WONILL, Korea) with a maximum torque of 30kgf-cm, rotation of 20-30rpm, K6G30C decelerator with a reduction ratio of 30:1 which could be used with no load for 48 was operated. In consideration of its weight, a lithium battery was utilized in line with the goal of developing a lightweight auger. In order to evaluate the performance of the first prototype, test sites were selected as 6 areas. The rotational force was found to be highest in area A(Solid area), followed by areas F(Mounted slope 40° area) and E(Mounted slope 30° area). It was also observed that in general, the rotational force increased along with the increase in soil depth with the maximum rotational force recorded at 10cm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.67-72
• /
• 2006

Temperature prediction in asphalt pavements is the one of most important factors for estimating the pavement response and predicting the pavement performance in the mechanistic-empirical pavement design. A study on temperature prediction procedure with variation of time and depth in asphalt pavements was conducted using field monitoring data. After selecting the temperature monitoring sections, the temperature sensors have been installed in different depths and the temperature data have been collected in every one hour. The developed pavement temperature prediction model was calibrated using field monitoring temperature data. The predicted temperatures were compared with measured temperatures at different seasons in selected sections. The results showed that the solar absorptivity and emissivity values in the fall is different from the values in other seasons. The predicted temperatures agree well with the measured temperatures at a wide range of temperatures. The temperature differences between each other fall in the range of ${\pm}3^{\circ}C$. It is also found that the regional characteristics did not affect the temperature prediction procedure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.797-804
• /
• 2006

A development of regression model for asphalt concrete pavements using Falling Weight Deflectometer deflections is presented in this paper. A backcalculation program based on layered elastic theory was used to generate the synthetic modulus database, which was used to generate 95% confidence intervals of modulus in each layer. Using deflection basins of FWD data used in developing this procedure were collected from Pavement Management System in flexible pavements. Assumptions of back-calculation are that one is 3 layered flexible pavement structure and another is depth to bedrock is finite. It is found that difference of between 95% confidence intervals and modulus ranges of other papers does not exist. So, the data of 95% confidence intervals in each layer was used to develop multiple regression models. Multiple regression equations of each layer were established by SPSS, package of Statics analysis. These models were proved by regression diagnostics, which include case analysis, multi-collinearity analysis, influence diagnostics and analysis of variance. And these models have higher degree of coefficient of determination than 0.75. So this models were applied to predict modulus of domestic asphalt concrete pavement at FWD field test.

• 한국노년학
• /
• v.30 no.3
• /
• pp.779-791
• /
• 2010

This study was to examine the differential impacts of social experiences and conditions on health among men and women aged 65 years or older, using data of the "2004 Survey on living Status of the Korean Elderly". The outcome variables were any disability, self-rated health, multiple morbidity, and self-rated quality of life. Multiple Classification Analysis was used to test the differential exposure to social factors contributes to gender difference in health. Gender differences in vulnerability of each individual socioeconomic, psycho-social, and behavioral factors for health were assessed by comparing logit coefficients in men and women. I found that gender difference in exposure to social factors contribute to inequalities in health between older men and women, however, gender inequalities remained after controlling for differential exposure except in case of quality of life. In addition, gender differences in health were further explained by differential vulnerabilities to social factors between men and women. Findings of this study may affirm the importance of further and deeper investigation of gender differences in health in later life. Gender sensitive approach in health planning and polices for the elderly is also suggested.

• Restorative Dentistry and Endodontics
• /
• v.47 no.4
• /
• pp.38.1-38.15
• /
• 2022

Objectives: This study investigated the cytotoxicity, radiopacity, pH, and dentinal tubule penetration of a paste of 1.0% calcium-doped zinc oxide nanocrystals (ZnO:1.0Ca) combined with propylene glycol (PRG) or polyethylene glycol and propylene glycol (PEG-PRG). Materials and Methods: The pastes were prepared by mixing calcium hydroxide [Ca(OH)₂] or ZnO:1.0Ca with PRG or a PEG-PRG mixture. The pH was evaluated after 24 and 96 hours of storage in deionized water. Digital radiographs were acquired for radiopacity analysis and bubble counting of each material. The materials were labeled with 0.1% fluorescein and applied to root canals, and images of their dentinal tubule penetration were obtained using confocal laser scanning microscopy. RAW264.7 macrophages were placed in different dilutions of culture media previously exposed to the materials for 24 and 96 hours and tested for cell viability using the MTT assay. Analysis of variance and the Tukey test (α = 0.05) were performed. Results: ZnO:1.0Ca materials showed lower viability at 1:1 and 1:2 dilutions than Ca(OH)₂ materials (p < 0.0001). Ca(OH)₂ had higher pH values than ZnO:1.0Ca at 24 and 96 hours, regardless of the vehicle (p < 0.05). ZnO:1.0Ca pastes showed higher radiopacity than Ca(OH)₂ pastes (p < 0.01). No between-material differences were found in bubble counting (p = 0.0902). The ZnO:1.0Ca pastes had a greater penetration depth than Ca(OH)₂ in the apical third (p < 0.0001). Conclusions: ZnO:1.0Ca medicaments presented higher penetrability, cell viability, and radiopacity than Ca(OH)₂. Higher values of cell viability and pH were present in Ca(OH)₂ than in ZnO:1.0Ca.

• Korean Journal of Culture and Social Issue
• /
• v.17 no.2
• /
• pp.241-260
• /
• 2011

This study was to develop the fun perception scale measuring what conditions employees experience fun feeling in work and to examine the construct validity of it. For this, the pre-studies(open-ended questionnaire, in-depth interviews, literature survey, pre-survey) were conducted to develop the preliminary questions of fun scale. In main study, 250 employees(male: 125, female, 125) were responded to a questionnaire consisted of 40 questions of fun perception scale extracted by pre-studies. The results were as follow. First, through the item analysis, factor analysis and reliability analysis, 7 factors composed of 29 items were extracted: 'self-determination', 'extrinsic reward', 'goal achievement', 'pleasure in the process', 'contribution to the company', 'worthless', 'challenge'. Cronbach's alpha reliability coefficient of each factor was suitable. Secondly, EFA was conducted to test the construct validity of fun scale with AMOS 16.0. Several goodness of fit indexes were used to assess model fit: X2/df, TLI, CFI, RMSEA. The results were revealed that all the indexes were acceptable with no additional modification. Based on these findings, the theoretical and the practical implications of fun perception scale were discussed.