• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.69-78
• /
• 2015

If an active displacement occurs on a wall with finite size, the ground behind the wall forms shapes of 3-dimensional wedges and 3-dimensional active earth pressure are applied on the wall. In the previous studies, shapes of 3-dimensional wedges were measured and the resultant of 3-dimensional active earth pressure has been calculated. In this study, the magnitude and the distribution of 3-dimensional active earth pressure depending on the size of a rectangular wall, which was defined by the aspect ratio (h/w), that is, the ratio between the height and the width of wall, were measured and compared with previous 3-dimensional models. The result shows that, the horizontal displacement (S) of the wall is approx 0.12% of the height of wall (h). The resultant 3-dimensional active earth pressure is similar to that of Karstedt (1982). The distributions of earth pressures on the wall are parabolic shape. The peak earth pressure was measured at the 0.5~0.55 depth from the ground surface. The reduction factor of 3-dimensional active earth pressure against the 2-dimensional earth pressure (${\alpha}$) depending the aspect ratio (h/w) is presented by the diagram.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.5
• /
• pp.497-502
• /
• 1997

A seed pelleting technique was developed for easy handling of small sesame seeds (Chinbaeckkae) and for direct seeding in field. The mixture of pelleting material, binder(sodium alginate) and seeds were dropped in 100mM CaCl$_2$ solution. Charcoal was appeared as a best material among all to make pellets with the characters of hardness, breakdown, destruction rate and germination percentage. Zeolite formed the hardest pellet seeds among the materials and 1~3 seeds contained in a pellet on the treatment of 87g of sesame seeds mixed in 1$\ell$ CaCl$_2$ solution was estimated optimum rate of seed mixure with few appearance of seedless pellet. The moisture absorption rate was greater in the order of peat＋charcoal > peat > charcoal > zeolite. Germination percentage of pelleted seeds with charcoal was the best and similar to that of common non-treated seeds. Germination percentage of pelleted seeds by sowing depth of exposing a quarter of pellet seeds on the surface of vermiculite germination test box and were 92％ in charcoal treatment and was the best among all released materials.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.91-99
• /
• 2017

The purpose of this paper is to evaluate the flexural performance of reinforced concrete (RC) beams repaired with polymer mortar. The repaired and non-repaired 13th beams which was fabricated by considering repair position, repair depth, and curing age of polymer mortar as test variables were tested under three point loading. All specimens repaired in compressive and tensile zone did not fail due to interfacial failure between polymer mortar and concrete but failed when the strain of repaired mortar exceeded the ultimate tensile strain of polymer mortar. Maximum load of specimens repaired in compressive zone was similar to that of non-repaired specimen, reference specimen. Additionally, their ductility index was higher than that of reference specimen. On the other hand, specimens repaired in tensile zone failed very brittlely and have a lower ductility index than reference specimen. Nonlinear analysis by using OpenSees was performed to predict the behavior of RC beam repaired with polymer mortar. Two dimension frame element was used to simplify an analysis model and fiber model was applied to consider the material non-linearity. It was confirmed from the analysis results that nonlinear analysis properly predicts the behavior of specimens repaired in compressive zone and overestimates the behavior of specimens repaired in tensile zone.

• Journal of the Korean Home Economics Association
• /
• v.43 no.5 s.207
• /
• pp.131-147
• /
• 2005

The purpose of this study was to provide a better understanding of foreign-born Korean children's early school adjustment in the U.S. The interaction between the foreign-born Korean children in the U.S. and several of the children's microsystems, including family, school, and peer was assessed to meet this purpose. The study subjects were 43 foreign-bom Korean children who were sampled from Korean Sunday Language schools and who attended local schools in the Boston area, MA, USA. Quantitative analysis was conducted to identify which variables of interest predicted the early adjustment of this group of children. Furthermore, in-depth interviews were conducted with mothers of the children from the top and bottom groups 1) the most successful (in the top quartile) and 2) the least successful adjustment groups (in the bottom quartile) sorted by scores on the Peabody Picture Vocabulary Test-Revised (PPVT-R). The interview results were analyzed to elicit maternal perceptions/beliefs on education, in general, and those of home-school relationships, in specific. Several conclusions can be drawn from both the quantitative and qualitative analyses. The results of multiple regression and path analysis showed that the children's language development predicted their adjustment, but the effects of the other two variables, peer relationships and school experiences, on the adjustment of children, were mediated through the children's language. Moreover, common themes and patterns in the responses to a series of open-ended questions emerged from the interviews with the two groups of mothers. The two mothers of the least successful group were concerned about their children's future and school success, but thev did not show anv responsive attitudes toward achieving this goal. By contrast, the mothers from the most successful group were self-determined with regard to their children's education and had strong beliefs and values on how to raise their children in the new culture. The implications were discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.733-740
• /
• 2017

'The facilities standards of water supply' issued by the Ministry of Environment in 2004 indicates that expansion joints cannot be used in welding water supply steel pipes. However, their reason is not clear and it is difficult to confirm the stability of the steel pipe for a water supply pipeline. The purpose of this study is to determine whether or not an expansion joint is necessary to improve the stability of water supply in steel pipe through a displacement analysis of the pipework. The test results are as follows. Firstly, it was found that expansion and contraction of the water supply steel pipe (D 2,400 mm) occur repeatedly in 4 cycles per year, and the maximum expansion and contraction amount of the pipe is 13.03 mm in 1.24 km pipelines. Secondly, the thermal stress caused by expansion and contraction of the steel pipe is $13.7{\sim}36.1kgf/cm^2$ according to the burial depth (0~4 m). The main comparison factors to determine the stability of the steel pipe (STWW 400) were the allowable tensile strength and the fatigue limit, which were computed to be $4,100kgf/cm^2$ and $1,840kgf/cm^2$, respectively. Finally, the thermal stress of the steel pipe is very small compared to the allowable tensile stress and fatigue stress. Therefore, thermal stress does not affect the stability of the steel pipe, although the expansion and contraction of the steel pipe occurs by temperature changes. In conclusion, the study demonstrated that expansion joints are not required in water supply steel pipelines.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.1
• /
• pp.61-65
• /
• 2012

Once oil has spilled, oil spill responders use a variety of countermeasures to reduce the adverse effects of spilled oil on the environment. Mechanical methods of containment and recovery are preferred as the first response when the use of other methods fail or are ineffective. In these cases, the application of oil dispersants shall be use only as a last resort. While effectiveness of dispersants in removing oil form the sea surface is proven, the use of dispersants is controlled in almost all countries due to the toxicity of their active agents and the dispersed oil on the marine environment. However, according to reports, after dispersant application, no significant toxicity to fish or shrimp was observed in the field-collected samples. Moreover, the results also indicate that dispersant-oil mixtures are generally no more toxic to the aquatic test species than oil alone. During the Deepwater Horizon Incident, dispersants were applied to floating oil and injected into the oil plume at depth. These decisions were carefully considered by state and federal agencies, as well as BP, to prevent as much oil as possible from reaching sensitive shoreline habitats. Net Environmental Benefit Analysis for dispersant use assumed that dispersants appear to prevent long-term contamination resulting absence of oil in the substrate and will benefit marine wildlife by decreasing the risk of significant contamination to feathers or fur. Further study to use dispersants with scientific baseline is needed for our maritime environment which consistently threaten huge oil spill incidents occurrence.

• Computational Structural Engineering
• /
• v.2 no.1
• /
• pp.65-70
• /
• 1989

An analytical study was conducted using the Galerkin technique to determine behaviour of thin fibrereinforced and laminated composite pipes under soil pressure. Geometric nonlinearity and material linearity have been assumed. It is assumed that vertical and lateral soil pressure are proportional to the depth and lateral displacement of the pipe respectively. It is also assumed that radial shear stress is negligible because the ratio of thickness to the radius of pipe is very small. The above results are verified by the finite element analysis.

• Journal of Korea Water Resources Association
• /
• v.48 no.10
• /
• pp.831-843
• /
• 2015

This study estimates MODIS-derived evapotranspiration data quality by revised RS-PM algorithm in Seolmacheon test basin. We used latent flux with eddy covariance method to evaluate MODIS-derived spatial evapotranspiration and gap-filled these data by three methods (FAO-PM, MDV and Kalman Filter) and to quantify daily evapotranspiration. Gap-filled daily evapotranspiration data was used to evaluate evapotranspiration computed by revised RS-PM algorithm derived MODIS satellite images. For the water budget analysis, we used soil moisture content that is quantified to average individual soil moisture rate observed by TDR (Time Domain Reflectometry) sensor at soil depth. The soil moisture variation is calculated in consideration from initial to final soil moisture content. According to the result of this study, evapotranspiration computed by revised RS-PM algorithm is very larger than eddy covariance data gap-filled by three methods. Also, water budget characteristics is not closed. We could analysis that MODIS-derived spatial evapotranspiration does not represent actual evapotranspiration in Seolmacheon.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.2
• /
• pp.144-148
• /
• 1999

This study was conducted to test actual oxygen consumption rates of Nile tilapia (Oreochromis niloticus) at a commercial scale high density culture tank in the recirculating culture system, with a special emphasis on the oxygen consumption rate of this species with different daily feeding frequencies. Nile tilapia, an average of 400 g and a total wright of 390 kg, were stocked in a circular concrete tank of 2.9 m in diameter and 0.8 m in depth, in a recirculating culture system. The fish were fed commercial diet 1, 2, 5, and 9 times per day between 09:00 h and 19:00 h. feed was evenly supplied where the fish were fed more than once a day. Dissolved oxygen of influent and effluent water was monitored every 50 seconds by a computer with electrodes for 24 hours. The standard metabolic rate of tilapia was $39.31{\pm}4.4mg\;O_2/kg$ fish/hr in the present study. The maximum oxygen consumption was reached between 30 to 50 minutes after feeding. The maximum oxygen consumption levels of 1, 2, 5, and 9 feeding times per day were 161.2, 123.4, 111.1 and 111.1 mg $O_2/kg$ fish/hr, respectively. While the mean oxygen consumption levels of 1, 2, 5, and 9 feeding times per day were $79.9{\pm}21.5,\;81.3{\pm}14.8,\;84.2{\pm}9,9$ and $98,9{\pm}11.0mg\;O_2/kg$ fish/hr, respectively. These results show that oxygen consumption rates are not much different between the feeding frequencies. These results could be used to design to provide desirable oxygen supply system in the recirculating high-density tilapia culture system.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.299-308
• /
• 2009

A magentotelluric (MT) survey at the Uiseong area has been performed for the site investigation of pilot scale $CO_2$ sequestration. The purpose of the MT survey is to delineate deeply extended fracture systems that can act as a leakage path of injected $CO_2$ Plume. Since the target area is extremely noisy in electromagentic sense, low frequency data below 1 Hz cannot be used for inversion. Two- and three-dimensional interpretation of the MT data showed a very clear conductive anomaly, which has the direction of $N55\sim65^{\circ}W$ and is extended roughly down to 1.6 km. It have the same direction with the strike-slip faults, the Gaeum and Geumcheon Faults. On the contrary, the eastern part of the survey area shows relatively homogeneous to the depth of 2 km though some small fractures at shallow depths can be found. Test drilling and high-definition borehole surveys should be followed at the eastern part of the survey area and hydraulic fracturing is required for injection of $CO_2$, because mean porosity of the sedimetary rock in the area is only 1.47%.