Since the most of Korean dairy and cattle raising farms are too small to introduce western mechanized farming, it is necessary to develope small size equipments. This study has been carried to develop a rotary mower as on attachment of 8 to 10 horse powertiller which is widely spread in rural area. It will not ony be helpfull for the farmers to harvesting hay grass but also desirable to increase the power tiller utility. The protto type rotary mower designed through the fundamental investigations, has been modified and improved through the field trials, and a series of field tests has been carried to investigate its performance and economic feasibility comparing with existing vailable harvesting equipments. The results are as follows; 1. To increase the stability, two guide wheels are attached to both side of the protto type rotary mower. 2. To prevent the clinging of tall grasses, the vertical driving shafts are covered with cylindrical protectors. 3. The cutting height is adjustable in 8 steps from 2.5 to 20 centimeters by changing the length of guide wheel legs. 4. The practical Critical cutting speed were always higher than theoretical value in both case of single cutting blade and three when the cutting depth was 25 millimeter. 5. The peripheral speed of cutting blade was varied in response to the change of engine speed, mean while the peripheral speed was adequate as it was changhed from 25 to 35 meter per second when the power tiller is operated in proper working ground speed. 6. The time requirement to harvest 10 a were 88.7, 54.6 and 41.4 minutes for the first, second and third stage of ground speed respectively, and because of the difficulty of delivery, it was observed that operating with fourth stage of ground speed was not recomanendable when the grass height is taller than 90 centimeters. 7. The performance of rotary mower were 1.1-1.7, 1.4-4.0, 3.8-11.8 and 7.4-22.0 times of reciprocating mower, portable disc type cutter, hay scythe and ordinary sickle respectively. 8. When the slope exceeds, 20 degree the downward harvesting operation was impossible because of the excessive front end weight, while less than 5 degree of land slope did not effect in field operation. 9. Increased traveling spee caused higher cutting height and slight cutting failure, but seems not to effect to the gross yield, and the efficiency of cutting width were from 83 to 94 precent. 10. Tn rank of economy were rotary mower (3,2 stage operation), reciprocating mower, hay scythe, portable disc type cutter and sickle in order when the annul operation exdeeds 100 hours. From the above results, it is convinced that the protto type rotary mower is good enough to the livestock farmers as a hay harvesting equipment because of its economy, hardiness in operating and its out standing performance and hopefully it will contribute to the extension of Korean livestock farming.
최근 집중강우로 인하여 전국적으로 산사태 및 사면붕괴 현상이 빈번히 발생하고 있다. 이러한 산지 및 비탈면에서 발생하는 자연재해에 대한 대책안 마련 및 설계 입력자료로서 지반의 강도정수(전단강도)를 도출해야만 한다. 그러나 현재 산지 및 비탈면에 접근하여 지반조사를 하기 위해서는 과다한 산림훼손과 많은 경제적인 비용 등이 요구되어진다. 따라서 본 연구에서는 현장에서 인력운반이 가능한 경량화된 소형동적콘관입시험기를 제작하여 다수의 지역에 대한 지반의 특성 및 강도정수를 산출하였다. 그리고 국내 및 외국의 소형동적콘관입시험 방법에 대해서 연구 분석하여 국내에 적합한 콘 재료와 시험방법을 제안하였으며, 대표적인 지역을 대상으로 현장에서 콘관입시험 Nc값과 표준관입시험 N값과 비교 분석하였다. 이와 더불어 직접전단시험 및 공내전단시험을 실시하여 토층심도별, 기반암별, 흙의 분류별 그리고 #200번체 통과량별로 Nc값과 전단강도와의 상관관계를 분석하였다. 특히 본 연구에서는 산지조건에서 가장 많이 분포하는 사질토를 대상으로 Nc값에 대응하는 전단강도(점착력 및 내부마찰각)와의 상관식을 제안하여 산지 토층에 대한 효율적인 지반강도정수를 산출하도록 하였다.
A variety of revegetation methods are being utilized and developed. However, most of revegetation methods used on highway slopes in Korea are based on foreign-introduced plant varieties to stabilize road surfaces and to administer afforestation for surface covering at an earlier phase. Therefore. it results in various problems. such as failure to achieve harmony with the surrounding vegetation and 10 cause re-denudation of slopes as the foreign-in introduced plant varieties wane out from 2~3 years after hydro-seeding, etc. In addition, some of the revegetation plants seeded in the earlier phase grow excessively high, thus causes successional problems, such as to inhibit the invasion of the secondary vegetation from the surrounding areas, etc. Therefore, in this study, 160 slopes located in the nationwide express highways have been investigated and analyzed in order to produce basic data for restoration of ecological environment in slopes created on a long-term basis by investigating and analyzing locational characteristics of cut and filled slopes in express highways, status of revegetation methods, characteristics of soil and plant-ecological environment. 1. Investigation on cut and embanked slopes in express highways was carried out in the total of 160 locations, which include 108 cut slopes and 52 embanked slopes. As a whole, the most frequently used revegetation method was seed spray, which was found to be used in the total of 55 target slops investigated. 2. Planting method of Wistaria floribunda applied to some of the blasted rock zones was found to cause damages as Wistaria floribunda trailed up the surrounding vegetation and the secondary invaded trees. In order to prevent this, this method must be used only in the lowest parts of large-sized slopes. Also, it will be required to administer continuous management and maintenance in the areas already planted with this plants. 3. The areas of blasted rock and ripping rock slopes were applied with coir net (net + seeding) method. However, many of these areas failed in achieving ground covering. Most areas where revegetation was in progress, they were covered with Eragrostis curvula(Weeping lovegrass) only. In areas with soil, such as decomposition of granite, where afforestation is difficult. In this slopes, soil base must be improved by hrdroseeding with thin-layer vegetation base application methods in order to achieve success in afforestation with native plants. 4. Woody species, rather than herb species, are more helpful in stabilization of slope surfaces. Therefore, it is important to be able to grow and protect woody species on highway slopes. Growth of woody vegetation is most largely influenced by soil depth. Thus, when hydro-seeding woody plants, it is recommended to apply at the upper layer of the slopes, which is capable to sufficiently provide the fundamentals required in plant growth.
철도하중을 지지하고 있는 성토사면을 연직으로 굴착할 경우 철도노반의 안정성 확보를 위하여 보강이 필요하다. 본 연구에서는 사면굴착 후 전면 벽체를 형성하고, 통상적으로 사용되고 있는 쏘일네일링 시스템보다 짧으면서도 대구경인 봉상보강재를 적용하여 보강재의 길이, 수평 간격, 직경 및 설치 각도를 기준으로 총 15개 Case로 구분하여 각각에 대하여 조건별 안정성을 3차원 수치해석을 이용하여 검토하였다. 수치해석시 보강재와 주변 그라우팅과의 접촉면을 고려하기 위하여 그라우트재의 점착력과 강성 및 주면장을 고려하였다. 굴착심도 3m인 경우, 그라우트 직경 변화에 따른 변위해석 결과 보강재 직경이 커질수록 변위가 감소하나 직경 0.3m일 경우와 0.4m일 경우의 변위 차이가 미소하므로 경제성을 고려한다면 직경 0.3m가 가장 적합한 것으로 검토되었다. 보강재 조건별로 굴착 시 지표면 침하량과 벽체의 수평변위 및 보강재의 응력 및 경제성을 수치해석적으로 검토한 결과, 보강재 길이 3m, 직경 0.3m, 수평간격 1.5m, 경사각도 10도로 보강재를 배치하는 것이 최적의 조건으로 검토되었다. 또한 보강노반의 잠재적인 파괴면은 보강재 끝단에서 약 60도의 경사면으로 나타났으며, 철도하중 재하 시 보강재가 지표침하 및 벽체 수평변위를 안정적으로 억제하고 있는 것으로 판단되었다.
본 연구에서는 근접 굴착에 의한 지하 인프라 매설물의 변위 발생에 미치는 되메움 재료 종류의 영향을 검토하기 위하여 일련의 실내모형실험을 수행하였다. 모형실험에서는 기존 매설물 주변의 되메움 재료를 일반 토사(주문진 표준사)와 CLSM으로 적용하였으며, 실험결과를 바탕으로 굴착면과 되메움부의 이격거리에 따른 굴착 단계별 매설물의 변위를 분석하였다. 매설물 주변의 되메움 재료로 토사를 적용한 경우, 굴착으로 인한 배면의 토사가 붕괴한 후 안식각을 이루며 사면 안정화가 이루어 지는 과정이 굴착 단계마다 반복되었다. 그리고 토사의 붕괴선이 매설물 설치 위치를 지나게 되는 굴착 단계에서 매설물의 변위가 발생하기 시작하였다. 되메움 재료로 CLSM을 적용한 경우, 굴착면과의 이격 거리와 관계없이 되메움 심도까지 굴착이 진행되어도 모형지반의 수평 및 연직 변위는 거의 발생하지 않았다. 이러한 결과를 바탕으로 지하 매설물 설치 후의 되메움 재료를 선택함에 있어서 CLSM과 같은 비교적 강성이 큰 재료를 선택함으로써 근접 굴착으로 인해 발생되는 횡토압에 대한 저항과 원지반의 붕괴 억지 효과를 기대할 수 있을 것으로 판단된다.
동해 울릉분지 북동부에 위치한 키타-야마토 뱅크 주변해역에서는 대륙지각내 열개작용에 의한 분지형성과 관련된 지질구조, 화성활동 등의 중요한 정보가 확인된다. 키타-야마토 뱅크는 마이오세 초에 불완전한 열개작용에 의해 생성된 소규모 분지로, 분지내에서는 수심, 음향기반암의 깊이 및 퇴적층의 두께가 급격히 변화하고 있다. 연구지역은 신장력에 의해 확장성 지각변동을 받았으며, 초기 마이오세에 울릉분지가 열림에 따라 대륙지각의 분열이 시작되면서 기반암이 침강하기 시작하였다. 계속되는 확장과 열개 운동에 의해 대륙지각 파편 내에서 대규모 경계단층인 동시 열개성 정단층에 의해 둘려 쌓인 지구 및 반지구를 형성하였다. 반면에 퇴적암내의 소규모 후기 열개성 정단층들은 큰 지구조적 변형을 받지 않고 분지 침강, 퇴적물 하중 및 화성활동에 의해 계속 재활성되면서 생성되었다. 지구 및 반지구의 좁고 긴 함몰지대 내의 불규칙한 음향기반암 위에는 최대 1.2초 두께의 마이오세부터 홀로세에 이르는 퇴적물이 쌓여 있으며, 동시 열개성 퇴적층으로 추정되는 층단위 V와 IV는 확장에 수반된 화성활동과 기반암까지 연장된 정단층들에 의해 변형되어 있다. 급경사의 분지 경계부의 상부층에는 대규모의 사면사태에 의해 형성된 함몰침식대의 퇴적구조를 보여준다.
하천 제방은 홍수 시 유수를 원활하게 소통시키고 제내지를 보호하기 위해 하천을 따라 축조한 시설이다. 하지만 이러한 제방도 침투로 인해 제내지측 사면에 포화표면이 지속적으로 발생하게 되면, 제방은 파괴될 수 있다. 제체 침투에 의해 발생되는 침윤선은 적절한 배수 체계를 이용하여 강하될 수 있다. 본 연구의 목적은 제내지 비탈 끝에 설치되는 배수공을 통한 침투조절의 효과를 제시하고, 각기 다른 형상을 하고 있는 미국의 공병단과 일본의 국토개발기술연구센터에서 제시한 배수공의 효과를 비교, 검토하는데 있다. 이를 위해 배수공의 포함 여부에 따른 제방 침투에 관한 모형실험을 수행하였다. 축조된 제방 모형의 규격은 둑마루폭 0.5m, 하부폭 2.6m, 사면경사 1 : 2, 제방 높이 0.55m이고, 제외지측 수위는 0.5m이다. 미 공병단의 배수공은 삼각형이고 일본의 국토개발기술연구센터의 배수공은 사각형이며, 각각의 배수공 폭은 0.4m로 설치하였다. 배수공을 포함하지 않은 제방 모형에서는 침투에 의해 제내지측 사면에 포화표면이 발생하였으나, 미 공병단과 일본의 국토개발기술연구센터에서 제시한 배수공을 포함한 제방에서는 모두 포화표면이 발생하지 않았다. 이러한 모형실험의 결과는 SEEP/W를 통한 수치모의 모형의 보정과 검증에 활용되었다. 그리고 배수공의 폭을 5 cm씩 줄여가며 수치모의를 수행해 본 결과, 일본의 국토개발기술연구센터식 배수공이 미국의 공병단식 배수공에 비해 다소 안정한 것으로 분석되었다. 또한, 일본의 국토개발기술연구센터식 배수공은 시공이 쉬운 장점이 있다. 본 연구의 결과는 향후 배수공을 이용한 제방의 침투조절 계획에 활용될 수 있을 것으로 전망된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.