• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.343-345
• /
• 2012

대향 타겟 스퍼터링법 (Facing Targets Sputtering)을 이용하여 저온 공정에서 ZnO 박막을 증착하였다. 이 실험에서 두 개의 타겟의 거리를 110nm로 고정하고 박막의 증착두께를 150nm로 정하였다. 산소 가스의 유량, 인가 전력을 변수로 하였을 경우 ZnO 박막의 방향성과 결정성을 XRD로 측정하고 분석하였다. 그 결과 인가전압과 산소 유량의 증가에 따라 결정성은 좋아진다.

• Korean Journal of Metals and Materials
• /
• v.47 no.6
• /
• pp.378-382
• /
• 2009

We investigated the effects of deposition conditions on the fabrication of $Fe_{3}O_{4}$ thin films using a reactive DC magnetron sputtering at room temperature. The structural, electrical, and magnetic properties of Fe oxide films dependence on the film thickness, oxygen flow rate, and the substrate crystallinity were also studied. We have successfully fabricated $Fe_{3}O_{4}$ film with thickness of about 10 nm under optimal reactive sputtering conditions. The saturation magnetization, resistivity, and Verwey transition of the $Fe_{3}O_{4}$ film were298 emu/cc, $4.0{\times}10^{-2}{\Omega}cm$, and 125 K, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.196-196
• /
• 2016

Landslide dam failure presents as a severe natural disaster due to its adverse impact to people and property. If the landslide dams failed, the discharge of a huge volume of both water and sediment could result in a catastrophic flood in the downstream area. In most of previous studies, breaching process used to be considered as a constructed dam, rather than as a landslide dam. Their erosion rate was assumed to relate to discharge by a sediment transport equation. However, during surface erosion of landslide dam, the sediment transportation regime is greatly dependent on the slope surface and the sediment concentration in the flow. This study aims to accurately simulate the outflow hydrograph caused by landslide dam by overtopping through a 2D surface flow erosion/deposition model. The lateral erosion velocity in this model was presented as a function of the shear stress on the side wall. The simulated results were then compared and it was coherent with the results obtained from the experiments.

• Corrosion Science and Technology
• /
• v.18 no.5
• /
• pp.190-195
• /
• 2019

SA508 low-alloy steel for a reactor vessel was exposed to primary water in a pressurized water reactor (PWR) plant because the cladding layer of type 309 stainless steel for the RPV was removed, due to an accident in which the detachment of the thermal sleeve occurred. The major advantage of the electrochemical deposition (ECD) Ni plating technique is that the reactor pressure vessel can be repaired without significant thermal effects, and Ni has solid corrosion resistance that can withstand boric acid. The corrosion rate assessment of the damaged part was performed, and its trend was analyzed. Essential variables of the Ni plating for repair of the damaged part were derived. These conditions are applicable variables for the repair plating device, and have been carefully adjusted using the repair plating device. The process for establishing ASME technical standards called Code Case N-840 is described. The process of developing Ni-plating devices, and the electroplating procedure specification (EPS) are described.

• Journal of Hydrogen and New Energy
• /
• v.32 no.5
• /
• pp.340-346
• /
• 2021

The initial electrochemical performance of ceramic fuel cell with thin-film electrolyte fabricated by plasma-enhanced atomic layer deposition method was evaluated in terms of peak power density ratio, open circuit voltage ratio, and activation/ohmic resistance ratios at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively. The peak power density ratio reduced as ~52% for 30 min, which continually decreased as time increased but degradation rate gradually decreased. The open circuit voltage ratio decreased with respect time; however, its behavior was evidently different from the reduction behavior of the peak power density. The activation resistance ratio increased as ~127% for 30 min, which was almost similar with the reduction behavior of the peak power density ratio.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1033-1037
• /
• 2019

GaN-based sensors have been widely investigated thanks to its potential in detecting the presence of hydrogen. In this study, we fabricated hydrogen gas sensors with AlGaN/GaN heterojunction and investigated how the sensing performance to be affected by SiN surface passivation. The gas sensor employed a high electron mobility transistors (HEMTs) with 30 nm platinum catalyst as a gate to detect the hydrogen presence. SiN layer was deposited by inductively-coupled chemical vapor deposition as post-passivation. The sensors with SiN passivation exhibited hydrogen sensing characteristics with various gas flow rates and concentrations of hydrogen in inert background gas at $200^{\circ}C$ similar to the ones without passivation. Aside from quick response time for both sensors, there are differences in sensitivity and recovery time because of the existence of the passivation layer. The results also confirmed the dependence of sensing performance on gas flow rate and gas concentration.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.125-137
• /
• 2019

The purpose of this paper is to study the source term behavior after severe accidents by using a semi-kinetic model for simulation and calculation of in-containment activity. The reactor containment specification and the safety features of the containment under different accident conditions play a great role in evaluating the in-containment activity. Assuming in-vessel and instantaneous release of radioactivity into the containment, the behavior of in-containment isotopic activity is studied for noble gasses (Kr and Xe) and the more volatile elements of iodine, cesium, and aerosols such as Te, Rb and Sr as illustrative examples of source term release under LOCA conditions. The results of the activity removal mechanisms indicates that the impact of volumetric leakage rate for noble gasses is important during the accident, while the influence of deposition on the containment surfaces for cesium, mainly iodine isotopes and aerosol has the largest contribution in removal of activity during evolution of the accident.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.39-43
• /
• 2022

In this paper, a study was conducted on encapsulation technology for high mechanical stability of flexible displays. First, unlike conventional encapsulation barrier that exclude cracks as much as possible for low water vapor transmission rate (WVTR), mechanical properties were improved by using a defect suppression mechanism introduced with crack arresters. The zero-stress encapsulation barrier optimizes the residual stress of the thin film based to improve the internal mechanical stability. The zero-stress encapsulation barrier was applied to the organic light emitting diodes (OLEDs) to confirm its characteristics and lifetime. Due to improved internal mechanical stability, it has a longer lifetime more than 35% compared to conventional encapsulation technologies. As the zero-stress encapsulation barrier proposed in this study does not require additional deposition process, it is not difficult to apply it. Based on various advantages, it is expected to play an important role in flexible displays.

• Archives of Metallurgy and Materials
• /
• v.65 no.4
• /
• pp.1371-1375
• /
• 2020

A superior SiC based thermal protection coating process for carbon composite, which can be especially effective in a hot oxidizing atmosphere, was established in this study. A multi-coating process based on a combination of Chemical Vapor Reaction (CVR) and Chemical Vapor Deposition (CVD) was developed. Various protective coating layers on carbon composite were tested in hot oxidizing surroundings and the test results verified that the thermal ablation rate could be dramatically reduced down to 3.8% when the protective multi-coating was applied. The thermal protection mechanism of the coating layers was also investigated.

• Korean Journal of Organic Agriculture
• /
• v.18 no.3
• /
• pp.347-361
• /
• 2010

This study was carried out to investigate the effects of wormwood (Artemisia sp.) addition on the growth performance, nutrients utilization and abdominal fat deposition of broiler chickens. Two hundred twenty five and two-day old Arboracre strain male commercial broiler chicks were distributed to 5 treatments with wormwood supplementation levels; C(O%), $T_1$ (1%), $T_2$ (3%), $T_3$ (5%), and $T_4$ (10%) and with 3 replications each with 5 birds for five weeks. Body weight gain during the experiment was improved in $T_1$ (1723.0g) compared with that of $T_3$ (1557.7g) and $T_4$ (1450.7g) (P<0.05). Feed intake was significantly (P<0.05) increased as the levels of wormwood addition increased (C: 2653.8g, T1: 2852.0, $T_2$: 2900.3, $T_3$: 2900.7g, T4: 2954.7g). Feed conversion rate (feed/gain) was significantly (P<0.05) increased as the levels of wormwood addition increased (C: 1.55, $T_1$: 1.66, $T_2$: 1.70, $T_3$: 1.86, $T_4$: 2.04). The days reaching to 2.0kg of body weight were expected to be 43.2 days in control, whereas those of group T1 were reduced to 42.6 days by 0.6 day from control. Nutrient utilization and abdominal fat deposition in the experiment were significantly decreased (P<0.05) and small intestine contents in the broilers was significantly increased (P<0.05) as the levels of wormwood addition increased. Therefore, although there was no significant improvement for the performance of broiler chickens with the dietary supplementation of wormwood meal, less than 1% addition of wormwood to broiler diets might have beneficial for human health by reducing the abdominal fat deposition of the broiler chicknens.