• 한국전기전자재료학회논문지
• /
• 제27권8호
• /
• pp.516-521
• /
• 2014

An excellent hydrophobic surface has a high contact angle over 147 degree and the contact angle hysteresis below $5^0$ was produced by using roughness combined with hydrophobic PTFE coatings, which were also confirmed to exhibit an extreme adhesion to glass substrate. To form the rough surface, the glass was etched by Ar-plasma. A very thin PTFE film was coated on the plasma etched glass surface. Roughness factors before or after PTFE coating on the plasma etched glass surface, based on Wensel's model were calculated, which agrees well with the dependence of the contact angle on the roughness factor is predicted by Wensel's model. The PTFE films deposited on glass by using a conventional rf-magnetron sputtering. The glass substrates were etched Ar-plasma prior to the deposition of PTFE. Their hydrophobicities are investigated for application as a anti-fouling coating layer on the screen of displays. It is found that the hydrophobicity of PTFE films mainly depends on the sputtering conditions, such as rf-power, Ar gas content introduced during deposition. These conditions are closely related to the deposition rate or thickness of PTFE film. Thus, it is also found that the deposition rate or the film thickness affects sensitively the geometrical morphology formed on surface of the rf-sputtered PTFE films. In particular, 1,950-nm-thick PTFE films deposited for 30 minute by rf-power 50 watt under Ar gas content of 20 sccm shows a very excellent optical transmittance and a good anti-fouling property and a good durability.

• 한국수자원학회논문집
• /
• 제35권6호
• /
• pp.753-762
• /
• 2002

본 연구에서는 치수안전도의 정확한 평가는 물론 자연환경에 대한 평가에 중요한 하천식물군락에 주목하였다. 특히, 본 연구에서는 하천식물군락과 유사거동에 따른 하도변화와의 상관관계의 규명에 관심을 두었다. 하도수리학 관점에서 하천내 식생분포 특성에 대한 하도현장을 조사한 결과, 하도변화를 야기하는 여러 물리적 요인이 있지만, 하천식생에 의한 하도변화, 특히 하천식물군락에 의한 유사퇴적이 하상변동을 야기시키고 있음이 확인되었다. 이를 수리학적으로 규명하기 위하여 수리모형실험을 실시하였다. 실험에서 하상경사 1/200인 자갈하천에 우점하는 달뿌리풀을 대상으로 하였다. 실험의 내용은 평균입경 0.3 mm의 소류사를 총 1 시간동안 27 kg을 균등하게 공급한 결과, 거의 동일한 수리량 조건하에서 식물군락의 밀도와 배치에 따라 흐름의 변화와 퇴적/세굴양상이 분명히 다르게 나타났다. 따라서, 하도내 퇴적 및 세굴이 하천식물군락의 분포 특성에도 영향을 미치므로 하천식물군락과 유사거동에 따른 하도변화는 상호 밀접한 관계가 있을 것으로 평가할 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.381-384
• /
• 2011

본 연구에서는 초음속 비행체의 조파저항을 감소시키기 위하여, 최대 주파수 80 kHz의 반복 레이저 펄스에 의해 야기된 에너지 부가법에 관한 실험적 연구가 수행된다. 기류 마하수 1.94의 흡입식 초음속 풍동의 바깥에 설치된 초점렌즈에 의하여 레이저 펄스가 실린더 모델 전단부에 집약된다. 시간변동 항력과 정체압력은 로드셀과 PCB 압력센서에 의해서 측정되며, 동시에 고속 카메라를 이용하여 가시화가 수행된다. 본 연구의 결과로부터, 레이저 펄스 에너지 부가에 의한 항력 저감량은 레이저 펄스 주파수가 증가할 때, 최대 21%까지 거의 선형적으로 증가하였다. 부가 에너지 효율은 레이저 펄스 에너지에만 의존하는 결과를 얻었으며, 최대 1000%까지 달성되었다.

• Asian Journal of Atmospheric Environment
• /
• 제12권3호
• /
• pp.215-231
• /
• 2018

In order to understand the variation of air quality and the concentration of atmospheric particulates in Chengdu Second Ring Road renovation project, this paper starts to investigate the surrounding residents' opinions on the influenced environment and their daily lives via questionnaires. Then the study numerically simulates the change rule of atmospheric particulates in terms of time and space by using the Gaussian dispersion-deposition model and the compartment model. The optimized scientific scheme is selected by the improved fuzzy analytical hierarchy process(FAHP) to help decision making for the future urban reconstructions. Finally, the reduced emissions of atmospheric particulates are measured when the improvement scheme is provided. According to the study, it can be concluded that the concentration of atmospheric particulates increases rapidly in central Chengdu city during the renovation project, which results in worsening air quality in Chengdu during March 2012 to March 2013. Taking related measures on energy saving and emission reduction can effectively reduce the concentration of atmospheric particulates and promote economic, environmental and social coordination.

• 기술사
• /
• 제16권3호
• /
• pp.68-73
• /
• 1983

IC전자부품 중 DIP계 종류를 바렐을 사용하여 주석도금 할 때에 그 전착현상을 조사하여 부분전류의 동태를 설명할 수 있는 변화인자를 알아보려 하였다. DIP와 같은 모양인 IC부품은 부분전도체로 구분되어지며 그 전착상태를 one-dimensional model로 분석하였을때, 가입전류밀도, 바렐의 회전속도, 용액중 금속이온 농도와 깊은 관계가 있음을 보인다. 다공질과 같은 것으로 간주한 one-dimensional model로서 의 이론식은 J=$\delta$'/$\beta$-{-c$^3$/${\gamma}$-exp-(1-$\alpha$)n$\Phi$}로 표현된다.

• 대한기계학회논문집B
• /
• 제32권3호
• /
• pp.181-189
• /
• 2008

GaAs film growth process from trimethylgallium(TMGa) and tertiary-butylarsine(TBAs) using a horizontal MOCVD reactor was numerically studied to explain the experimental result that the decreasing surface reaction rate as the increasing partial pressure of group III species. Using the non-linear model based on the Langmuir isotherm which considers the adsorption and desorption of molecules, film deposition over the entire reactor scale was predicted by computational fluid dynamics (CFD) with the aid of the parameters obtained from the selective area growth (SAG) technique. CFD Results using the non-linear surface reaction model with the parameters determined from the SAG experiments predicted too high film growth rate compared to the measured values at the downstream region where the temperature was decreased abruptly. The pairs of ($k_s^n$, K) from the numerical simulations was $(2.52{\times}10K^{-6}mol/m^2/s,\;1.6{\times}10^5m^3/mol)$, whereas the experimentally determined was $(3.58{\times}10^{-5}mol/m^2/s,\;6.9{\times}10^5m^3/mol)$.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.197-200
• /
• 2015

Understanding the slag flow behavior is important in an entrained coal gasifier for its influence of ash discharge and wall heat transfer rate. This study presents a new model to predict the transient behavior of the liquid and solid slag layers. Unlike the previous steady-state model, the solid slag layer was included in solving the governing equations in order to identify the temporal and spatial transformation between the solid-liquid slag, rather than treating the solid region as a boundary condition of the liquid layer. The performance of the new model was evaluated for changes in the slag deposition rate (${\pm}10%$) and gas temperature (${\pm}50K$) in a simple cylindrical gasifier. The results show that the characteristic times to reach a new steady-state ranged between 80 s to 180s for the changes in the two parameters. Because the characteristic times of the gasifier temperature and slag deposition rate by changes in the coal type and/or operating conditions would be almost instantaneous, the time-scale for the slag thickness at the bottom of the gasifier to stabilize was much larger.

• 한국진공학회지
• /
• 제4권S1호
• /
• pp.190-195
• /
• 1995

The feature scale model for selective chemical vapor deopsition process was proposed and the simulation was performed to study the selectivity and uniformity of deposited thin film using Monte Carlo method and string algorithm. The effect of model parameters such as sticking coefficient, aspect ratio, and surface diffusion coefficient on the deposited thin film pattern was improved for lower sticking coefficient and higher aspect ratio. It was revealed that the selectivity loss ascrives to the surface diffusion. Different values of sticking coefficients on Si and on SiO2 surface greatly influenced the deopsited thin film profile. In addition, as the lateral wall angle decreased, the selectively deposited film had improved uniformity except the vicinity of trench wall. The optimum eondition for the most flat selective film deposition pattern is the case with low sticking coefficient and slightly increased surface diffusion coefficient.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.127-140
• /
• 2002

This paper presents some of the results of a project whose aim has been to produce a full simulation model which would determine the efficacy of pesticides for use by both farmers and the bio-chemical industry. The work presented here describes how crop architecture can be mathematically modelled and how the mechanics of pesticide droplet capture can be simulated so that if a wind assisted droplet-trajectory model is assumed then droplet deposition patterns on crop surfaces can be predicted. This achievement, when combined with biological response models, will then enable the efficacy of pesticide use to be predicted.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1691-1698
• /
• 2001

In recent years, significant progress has been made in modeling turbulence behavior in plasma and its effect on transport. It has also been made in diagnostics for turbulence measurement; however, there is still a large gap between theoretical model and experimental measurements. Visualization of turbulence can improve the connection to theory and validation of the theoretical model. One method to visualize the flow structures in plasma is a laser Schlieren imaging technique. We have recently applied this technique and investigated the characteristics of a highly underexpanded pulsed plasma jet originating from an electrothermal capillary source. Measurements include temporally resolved laser Schlieren imaging of a precursor blast wave. Analysis on the trajectory of the precursor blast wave shows that it does not follow the scaling expected for a strong shock resulting from the instantaneous deposition of energy at a point. However, the shock velocity does scale as the square root of the deposited energy, in accordance with the point deposition approximation.