• 한국세라믹학회지
• /
• 제47권4호
• /
• pp.353-356
• /
• 2010

Zinc oxide (ZnO) thin films were deposited using atomic layer deposition. The electrical and optical properties were characterized using Hall measurements, spectroscopic ellipsometry and UV-visible spectrophotometry. The electronic concentration and the mobility were found to be critically dependent on the deposition temperature, exhibiting increased resistivity and reduced electronic mobility at low temperature. The corresponding optical properties were measured as a function of photon energy ranging from 1.5 to 5.0 eV. The simulated extinction coefficients allowed the determination of optical band gaps, i.e., ranging from 3.36 to 3.41 eV. The electronic carrier concentration appears to be related to the reduction in the corresponding band gap in ZnO thin films.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.714-716
• /
• 2002

Indium tin oxide (ITO) was used as the top anode of top emission inverted organic light emitting diodes (TEIOLEDs). TEIOLEDs were fabricated by deposition of an aluminum bottom cathode, an N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1, 1'-diphenyl-4, 4 1'-diamine (TPD) hole transport layer, a tris-8-hydroxyquinoline aluminum ($Alq_3$) emission layer, and an ITO top anode sequentially. ITO was deposited by r.f. magnetron sputtering without $O_2$ flow during the deposition. After the deposition, the deposited ITO layer was kept under oxygen atmosphere for the oxidation. The characteristics of the TEOILED were affected significantly by the post-deposition oxidation condition.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.218-218
• /
• 2011

The CIGS Solar Cells have the highest conversion efficiency in the film-type solar cells. They consist of p-type CuInSe2 film and n-type ZnO film. The CdS films are used as buffer layer in the CIGS solar cells since remarkable difference in the lattice constant and energy band gap of two films. The CdS films are toxic and make harmful circumstances. The CdS films deposition process need wet process. In this works, we design and make the hitter and lamp reflection part in the sputtering system for the ZnS films deposition as buffer layer, not using wet process. Film thickness, SEM, and AFM are measured for the uniformity valuation of the ZnS films. We conclude the optimum deposition temperature for the films uniformity less than 1.6%. The ZnS films deposited by the sputtering system are more dense and uniform than the CdS films deposited by the Chemical Bath Deposition Method(CBD) for the CIGS Solar Cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.328-329
• /
• 2005

Inorganic alignment layer (IAL) was deposited on an indium-tin-oxide (ITO) by using reactive sputtering deposition method. After deposited, IAL was irradiated by $Ar^+$ ion beam (IB) for liquid crystal (LC) alignment. IAL treated by various conditions such as IB energy, IB incident angle, and IB irradiation time had excellent alignment property and electro-optical property the same as that of PI. We investigated into the stability of ion beam treated IAL after a lapse of long time. However IAL irradiated IB did not occur degradation of electro-optical property. The results implied that IAL irradiated IB was adopted as LC alignment layer instead of rubbed polyimide.

• 태양에너지
• /
• 제7권2호
• /
• pp.7-13
• /
• 1987

Indium-Tin-Oxide (ITO)/Selenium heterojunction solar cells which fabricated by vacuum deposition technique and annealing process has been investigated. Prior to the Selenium deposition, a thin tellurium layer (about $10{\AA}$) was deposited onto the ITO layers to provide a sufficient mechanical bond between the Oxide and Selenium layers. The amorphous Selenium layer was deposited onto the Te-ITO layers, and then the crystallization of the amorphous Selenium was carried out using a hot plate at about $180^{\circ}C$ for 4 min. Efficient Selenium solar cells with conversion efficiency as high as 4.52% under AM1 condition has been fabricated in polycrystalline Selenium layer ($6{\mu}m$). The optimum data in manufacturing Se solar cell was listed in table.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.849-852
• /
• 2007

We studied ZnO thin films deposited with DC magnetron sputtering for channel layer of TFTs. After analyzing of the basic physical and chemical properties of ZnO thin films, we fabricated a TFTunit test cell. The field effect mobility of $1.8\;cm^2/Vs$ and threshold voltage of -0.7 V were obtained.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.193-202
• /
• 1994

A study of heat transfer and particle deposition has been made numerically for outside vapor deposition process. Heat conduction through the two layer cylinder which consists of the target and the deposited layer is included together with heat transfer and gas jet flow onto the cylinder from the torch. Temperature and flow fields have been obtained by an iterative method and thermophoretic particle deposition has been studied. Of particlar interests are effects of the thickness of the deposited layer, the torch speed and the rotation speed of the cylinder on particle deposition flux and efficiency. Effects of buoyancy, variable properties and tube rotation are included.

• Applied Science and Convergence Technology
• /
• 제23권1호
• /
• pp.40-43
• /
• 2014

We investigated the growth characteristics and interfacial properties of $HfO_2$ films deposited on Ge substrate through atomic layer deposited (ALD) by using an in-situ medium energy ion scattering analysis. The growth kinetics of $HfO_2$ grown on a $GeO_2/Ge$ substrate through ALD is similar to that grown on an $SiO_2/Si$ substrate. However, the incubation period of $HfO_2$ deposition on Ge is shorter than that on Si. The $HfO_2$ grown on the GeO/Ge substrate shows a significant diffusion of Hf atoms into the substrate interface and GeO volatilization after annealing at $700^{\circ}C$. The presence of low-quality Ge oxide or suboxide may degrade the electrical performance of device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1180-1182
• /
• 1993

In this paper, studing for the formative characterizations, bonding structures and hydrogen atom content in layer that oxynitride films deposited by Plasma CVD was investigated adaptive possibility for intemediate layer or final passivation layer of ULSI semiconductor devices.

• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.376-382
• /
• 2000

We successfully fabricated OLED(Organic Light Emitting Diodes) with Al cathodes electrode deposited by the DC magnetron sputtering. The effects of a controlled Al cathode layer of an Indium Tin Oxide (ITO)/blended single polymer layer (PVK Bu:PBD:dye)/Al light emitting diodes are described. The PVK (Poly(N-vinylcarbazole)) and Bu-PBD (2-(4-biphenyl-phenyl)-1,3,4-oxadiazole) are used hole transport polymer and electron transport molecule respectively. We found that both current injection and electroluminescence output are significantly different with a variable DC sputtering power. The difference is believed to be due to the influence near the blended polymer layer/cathode interface that results from the DC power and H$\sub$2//O in a chamber. And DC sputtering deposition is an effective way to fabricate Al electrodes with pronounced orientational characteristics without damage occurring to metal-organic interface during the sputtering deposition.