• Ocean and Polar Research
• /
• 제35권4호
• /
• pp.323-349
• /
• 2013

The mud shrimp Upogebia major (Upogebiidae: Decapoda: Crustacea) is a common species on muddy and sandy mud tidal flats in the west coast of Korea. They reside in Y-shaped burrows that can extend up to more than 2 meters below the sediment surface. They feed on suspended detritus carried into their burrow by the beating of their pleopods and captured by their hairy first two pairs of thoracic legs. Mud shrimp burrows provide a habitat for a variety of small organisms such as crabs, shrimps, polychaetes, and mollusks. Ovigerous females are observed from December to May. Females deposit eggs only once per breeding season. They start hatching in March and the pelagic larvae of first zoea appear in March and April, followed by benthic settlement in May. Growth over the first year is rapid, and females deposit their first eggs in the third breeding season, 31 months after their settlement. Adult shrimps live for 4~5 years. Depth of the burrow increases with body length. The deep burrows provide refuge from predators and physical stress, allowing the shrimps to survive for a long time. The mud shrimps supply oxygen-rich water to their deep burrows, and exert a great influence on the structure and metabolism of the tidal flat benthic community. However, recently this type of mud shrimp has posed a serious threat to the Korean clam industry along the west coast of Korea. The extensive burrowing shrimp populations suddenly invaded the tidal flats from 2010 where the clams (Ruditapes philippinarum) are raised. As a consequence, clam production has decreased by about 10% over the past three years in some Korean clam beds. Therefore, the objective of this study is to review the biology of this mud shrimp in order to seek solutions to control the burrowing of these shrimps.

• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.631-635
• /
• 2006

The properties of metal interlayered DLC films between the Si substrate and the DLC films were studied. DC magnetron sputtering method has been used to deposit intermediate layers of metals. And RF-PECVD method has been employed to synthesize DLC onto substrates of the silicon and metal layers. After we used metal Inter-layers, such as chromium, nickel, titanium and we studied tribological properties of the DLC films. The thickness of films were observed by field emission scanning electron microscope (FE-SEM). Also the surface morphology of the films were observed by an atomic force microscope (AFM). The crystallographic properties of the films were analyzed with X-ray diffraction (XRD), the friction coefficients were investigated by AFM in friction force microscope (FFM) mode. Tribological performances of the films were estimated by nano-indenter, stress tester measurement.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.152-156
• /
• 2004

A new tool of surface patterning technique for general purpose lithography was developed based on shadow mask method. This paper describes the fabrication of a new type of miniaturized shadow mask. The shadow mask is fabricated by photolithography and etching of 100-mm full wafer. The fabricated shadow mask has over 388 membranes with apertures of micrometer length scale ranging from 1${\mu}{\textrm}{m}$ to 100s ${\mu}{\textrm}{m}$ made on each 2mm${\times}$2mm large low stress silicon nitride membrane. It allows micro scale patterns to be directly deposited on substrate surface through apertures of the membrane. This shadow mask method has much wider choice of deposit materials, and can be applied to wider class of surfaces including chemical functional layer, MEMS/NEMS surfaces, and biosensors.

• Korea-Australia Rheology Journal
• /
• 제21권1호
• /
• pp.39-46
• /
• 2009

Atherosclerosis is a disease that narrows, thickens, hardens, and restructures a blood vessel due to substantial plaque deposit. The geometric models of the considered stenotic blood flow are three different types of constriction of cross-sectional area of blood vessel; 25%, 50%, and 75% of constriction. The computational model with the fluid-structure interaction is introduced to investigate the wall shear stresses, blood flow field and recirculation zone in the stenotic vessels. The velocity profile in a compliant stenotic artery with various constrictions is subjected to prescribed physiologic waveform. The computational simulations were performed, in which the physiological flow through a compliant axisymmetric stenotic blood vessel was solved using commercial software ADINA 8.4 developed by finite element method. We demonstrated comparisons of the wall shear stress with or without the fluid-structure interaction and their velocity profiles under the physiological flow condition in the compliant stenotic artery. The present results enhance our understanding of the hemodynamic characteristics in a compliant stenotic artery.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.105-111
• /
• 2015

Ultrasonic machining (USM) does not involve heating or any electrochemical effects, and subsequently causes low surface damage, has small residual stress, and does not rely on the conductivity of the workpiece. These characteristics are suitable for the machining of brittle materials, such as glass or ceramics. However, USM for brittle materials generates cracks on the workpiece while machining, especially at the hole exit with a small diameter. In this study, wax coating was used to deposit wax on the back side of the workpiece to decrease the occurrence of cracks at the exit holes in USM, and it was finally removed with a cleaning process. The experimental results show that this technique is beneficial for restricting the occurrence of cracks in glass or ceramics.

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.197-201
• /
• 2003

In this study, Ni-P layers were electroplated on the surface of stainless steel in order to investigate the effects of an additive and agitation on their mechanical properties and microstructure. The concentration of the additive in the plating solution increased, the pores formed in the layer decreased, while the residual stress developed in the layers during electroplating increased. Agitation of the solution during electroplating was observed to force to increase local pores in the layer, which lowers its tensile properties. Grain growth was suppressed due to very fine $Ni_3P$ precipitates formed at its grain boundaries during heat treatment at $343^{\circ}C$ for 1 hr in air.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.276-279
• /
• 2004

The factors affecting Ni-Co alloy electroforming were investigated to determine the optimum bath composition and electroplating parameters, like pH, temperature, and current density, suitable for high speed fabrication of a micro mold with longer lifetime. To obtain alloy deposits having uniform thickness and composition, electroplating parameters were finely tuned with home-made electroforming apparatus. Ni-Co alloy deposits had linearly increased Co with $Co^{2+}$ ion concentration in electroplating bath, and showing $412H_v$ of Victors hardness at $23wt\%$ of Co content. For Ni-Co alloy, sulfonate and diol related organic additives were very effective to alleviate its residual stress and surface roughness. The maximum deposition rate was $106{\mu}m/hr$ at 10ASD and the tensile strength of alloy deposit was 2 times larger than that of Ni only case.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.246-250
• /
• 2000

Reactive radio frequency (RF)magnetron sputter has been used to deposit AlN thin film on a Si substrate. (002)Preferred orientation of AlN thin film has been obtained at low sputtering pressure and high $\textrm{N}_2$ concentration. Also it has been shown that properties of AlN thin film are affected by presputtering time. As presputtering time increased aluminum and nitride concentration of AlN thin film decreased. But oxygen concentration and grain size increased. The good preferred orientation was shown with the short presputtering time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.37.1-37
• /
• 2001

Electric plating is used in various industry field. Specially, pulse plating is able to deposit material at high current density compared to conventional DC plating. For example, pulse plating can get more fine grain, can improve adhesion and metal distribution and current efficiency, can reduce internal stress and crack. Therefore, we developed bidirection pulse power supply(BPPS) which has high speed pulse current and high current density and improve deposition quality and increase plating speed in this paper. BPPS(Bidirection pulse power supply) needs high speed rising time, falling time and output current accuracy. BPPS consists of rectifier part, chopper part, invertor part, and control part. Rectifier part changes outprt current direction.

• 자원환경지질
• /
• 제55권2호
• /
• pp.183-195
• /
• 2022

열수 금광상은 단층대 내에서 일어나는 열수 유체의 폭발적 흐름의 증거이며, 그로 인해 만들어지는 맥의 구조 및 조직은 열수유체 재분배 기작을 반영한다. 본 리뷰 논문에서는 열수 금광상의 형성을 야기하는 지각 내 유체 순환의 기작으로서 석션 펌프와 단층 밸브 모델을 소개하고 단층역학적인 측면에서 검토한다. 석션 펌프와 단층 밸브 모델은 (1) 지구조 응력의 누적과 유체압의 증가, (2) 지진성 단층파열에 따른 지구조 응력의 해소와 유체압의 감소가 주기적으로 발생됨에 따라 단층을 통해 불균질하게 발생하는 유체의 이동 및 맥의 형성 기작이다. 두 기작들이 작동하는 지질학적 환경과 응력 조건은 서로 상이하며, 결과적으로 형성된 맥의 구조 및 조직적 특성은 서로 공통점과 차이점을 가진다. 석션 펌프와 단층 밸브 모델은 향후 한국의 열수 금광상의 구조적 성인을 정교하게 해석하고 추가적인 탐사의 효율성을 제고하는데 유용하게 활용될 수 있을 것으로 판단된다.