• The Journal of Advanced Prosthodontics
• /
• v.4 no.4
• /
• pp.254-258
• /
• 2012

Implant-supported overdenture is a reliable treatment option for the patients with edentulous mandible when they have difficulty in using complete dentures. Several options have been used for implant-supported overdenture attachments. Among these, bar attachment system has greater retention and better maintainability than others. SFI-Bar$^{(R)}$ is prefabricated and can be adjustable at chairside. Therefore, laboratory procedures such as soldering and welding are unnecessary, which leads to fewer errors and lower costs. A 67-year-old female patient presented, complaining of mobility of lower anterior teeth with old denture. She had been wearing complete denture in the maxilla and removable partial denture in the mandible with severe bone loss. After extracting the teeth, two implants were placed in front of mental foramen, and SFI-Bar$^{(R)}$ was connected. A tube bar was seated to two adapters through large ball joints and fixation screws, connecting each implant. The length of the tube bar was adjusted according to inter-implant distance. Then, a female part was attached to the bar beneath the new denture. This clinical report describes two-implant-supported overdenture using the SFI-Bar$^{(R)}$ system in a mandibular edentulous patient.

• Journal of Technologic Dentistry
• /
• v.9 no.1
• /
• pp.5-19
• /
• 1987

The factors which impact on the productivity of medical organization are technique, manager, raw materials, management style, manpower structure, job construction, and so on. Human resources is the most important factor among them, but the productivity of serice organization can not be measured easily. The purpose of this study was to verify the effect of laboratory status, the degree of job cognition, and stress on the productivity of dantal prosthetic products, and to fine out the factors which impact on the productivity. The results were as follows: 1. The job characteristice of crown bridge laboratory part and porcelain laboratory part similar to each other. Also partial denture laboratory part and complete denture laboratory part were similar to each other. But that of orthodontic laboratory part was different from other. 2. the degree of job cognition made significant difference statisfically according to job characteristics of each dental laboratorise. 3. The correlation coefficient between job cognition of dental laboratory technician and workshop environment was.23, but the correlation between job cognition job stress appeared reversely, its coefficient was-.17. 4. The productivity of technician engaged in dental laboratory was much heigher than that of technician engaged in dental clinical laboratory room, and each were different in the degree of job cognition. 5. the most important factors which impact one the performance productivity of dental laboratory technician were the fact whether he married or not and his status.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.29-36
• /
• 2022

When planning oral rehabilitation for maxillary edentulous patients, fixed prosthetic restoration using implants, complete denture restoration or overdentures using implants can be considered as treatment methods. In the case of complete denture restoration, it does not require additional surgery and is relatively economical. In the case of implant-supported fixed prostheses, the functional part is generally superior to that of complete denture restoration, but there are cases in which implant placement is clinically difficult. Recently in consideration of the patient's needs and the condition of the remaining alveolar bone, after partial implant placement, a method of restoring with a removable partial denture using implant-supported surveyed crown is also being attempted. This case is a case of performing a removable partial denture restoration using implant-supported surveyed crown in the anterior maxilla, and showing satisfactory esthetic and functional results.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.103-109
• /
• 2003

The purpose of this study is to ensure natural restoration of gingiva's form by making effective use of materials in a bid to improve the technique of festooning for denture base. 1. The improved technique is expected to prevent the degradation and deformation of cavity structure and restore it. 2. The improved technique is expected to prevent the change of facial appearance from esthetic viewpoint and restore it. 3. The improved technique is expected to impress again the deformed part on wax denture for additional festooning.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.413-439
• /
• 1995

The purpose of this study was to evaluate the stress distribution developed in the supporting structures by mandibular distal extension removable partial dentures with 2 different direct retainer designs and with or without indirect retainer and abutment splinting. The examined direct retainers on the second bicuspid abutment tooth were Akers clasp and RPA clasp, the indirect retainer was located on the mesial fossa of the first bicuspid, and the first and second bicuspid were splinted in case of tooth splinting. Total 8 cases were compared and analyzed with 3-dimensional finite element method. 150N were applied vertically on the artificial teeth of the removable partial denture, and then stress distribution patterns were analyzed and compared. The results were as follows : 1. The forces transmitted to the abutment tooth were primarily from the occlusal rests. 2. The abutment tooth was displaced distally when the force was applied. The compressive stress was observed at the distal root surface of the abutment tooth and the tensile stress, at the mesial root surface. 3. The denture base was displaced posteriorly and inferiorly when the force was applied. At the more distal portion of the denture base, the greater displacement was observed.And the anterior portion of the major connector was displaced superiorly. 4. The occlusal rest placed on the distal part of the abutment tooth tended to tip the tooth more posteriorly than did one on the mesial part of that tooth. 5. Severe superior displacement was observed at the anterior portion of the major connector in case of removable partial dentures without indirect retainer. 6. In case of tooth-splinting, the stress was distributed through all the root surface of both abuments. In case of no tooth-splinting, the stress was concentrated on the distal root surface of the primary abutment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.351-384
• /
• 1993

Complete denture occlusion must be developed to function efficiently and with the least amount of trauma to the supporting tissues. For the preservation of supporting tissues, it is imperative to reduce to a minimum the functional stress induced by dentures. The magnitude of the horizontal component of functional stress contributed by various occlusal teeth forms has not been studied. This study was aimed to investigate the influence of different occlusal teeth forms on the mode of distribution of the stresses in the mandibular tissue, and the displacement of lower dentures during the variant functional movement of mandible for this study three dimensional finite element analysis was used. FEM models were created using commercial software Super Sap for IBM 32 bit computer. The model was composed of 3380 brick elements and 4346 nodes. The results were as follows. 1. The magnitude of stress was similar between two models in centric occlusion, in the case of anatomic model, the stress was concentrated on the buccal side of alveolar ridge beneath the bicuspids. 2. During the protrusive movement, the increasing of stress from the posterior to anterior part of mandible was seen in the case of anatomic model. 3. During the lateral movement, the stress of anatomic model was greater than that of nonanatomic model. 4. The stress of anatomic model was concentrated on the anterior region of residual ridge during the lateral movement. 5. In the case of anatomic model the anterior part of denture was displaced severely at the centric and lateral position, but the denture of nonanatomic model was displaced minutely at the protrusive and lateral position.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.139-151
• /
• 2003

This study was to evaluate and to compare the compressive strength and the displacement effecting the abutment or the residual ridge which are transformed by the angle and the heights of the konus denture inner crown when restorating the unilateral konus denture by using the mandibular canine and the 1st premolar as an abutment. The author made 9 different models for different inner crown heights and konus angles. The inner crown height were divided to 5mm, 6mm, and 7mm and konus angles was divided to $4^{\circ}$, $6^{\circ}$, and $8^{\circ}$. And then in each model, 5kg of $15^{\circ}$ mesial load was stressed on the central fossa of the 1st premolar and the 1st molar. The stresses and displacement were measured using the finite element analysis. The results were as follows 1. The maximum compressive strength was shown on the connective area of the abutment and the denture base. 2. As the angle of the inner crown becomes increased, the compressive strength was shown smaller. 3. As the height of the inner crown becomes increased, the maximum compressive strength was shown smaller while the compressive strength of the root apex and the residual ridge showed larger. 4. When the stress was loaded only on the 1st premolar, the more compressive strength was concentrated on the root apex area of the 1st premolar. 5. When the stress was loaded only on the 1st premolar, the compressive strength was concentrated uniformly on the abutment and the residual ridge. 6. When the stress was loaded only on the 1st molar, the maximum displacement was shown on the distal part of the residual ridge.

• Journal of Surface Science and Engineering
• /
• v.37 no.5
• /
• pp.296-300
• /
• 2004

The defects of partial denture frameworks are mainly shrinkage porosity, inclusions, micro-crack, particles from investment, and dendritic structure. In order to investigate a good casting condition of partial denture frameworks, the three casting alloys and casting methods were used and detected casting defects were analyzed by using electrochemical methods. Three casting alloys (63Co-27Cr-5.5Mo, 63Ni-16Cr, 63Co-30Cr-5Mo) were prepared for fabricating partial denture frameworks with various casting methods; centrifugal casting (Kerr, USA), high frequency induction casting (Jelenko Eagle, USA), vacuum pressure casting (Bego, Germany). The casting temperature was $1,380^{\circ}C$ (63Co-27Cr-5.5Mo and 63Ni-16Cr) and $1,420^{\circ}C$ (63Co-30Cr-5Mo). The casting morphologies were analyzed using FE-SEM and EDX. The corrosion test of the dendritic structure was performed through potentiodynamic method in 0.9% NaCl solutions at $36.5^{\circ}C$ and corrosion surface was observed using SEM. The defects of partial denture frameworks improved in the order of centrifugal casting, high frequency induction casting, and vacuum pressure casting method, especially, pore defects were found at part of clasp in the case of centrifugal casting method. The structure of casting showed dendritic structure for three casting alloys. In the 63Co-27Cr-5.5Mo and 63Co-30Cr-5Mo, $\alpha$-Co and $\varepsilon$-Co phases were identified at matrix and $${\gamma}$-Ni_2$Cr second phase were shown in 63Ni-16Cr. Also, the corrosion resistance of cast structure increased in the order of vacuum pressure casting, high frequency induction casting, and centrifugal casting method.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.4 no.1
• /
• pp.26-31
• /
• 2008

Cerebrovascular Accident(stroke) is that a sudden, nonconvulsive loss of neurologic function due to an ischemic or hemorrhagic intracranial vascular event. If stroke happens at the portion of trigeminal motor nucleus or its control part of cerebral cortex, masticatory muscles will be atrophy or paralyzed. So it is possible that dental occlusion changes after stroke. A 74-aged woman recurred mild stroke 2 month ago, who had experienced severe stroke 2 years ago. After recurrence, suddenly her upper full denture was dropped when lower denture contacted upper one. According to the her occlusion exam, her lower jaw moved back slightly compared with the occlusion of old denture. And her face had asymmetry and lower jaw dislocated to paralyzed side. A 50-aged man was treated because many cervical caries, which would occur because of an aftereffect of stroke, long-herm hospitalization and limits of self oral-care. 6 years ago he had cerebral hemorrhage and he claimed that he cannot bite exactly. Just two pairs of teeth was contact on biting, his lower jaw was located back, too. This two case suggests that dental occlusion can change after stroke.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.433-445
• /
• 2012

Purpose: In order to validate empirically the theoretical model of this study subjects, who were limited in Andong gun, Youngyang gun, Uiseong gun, Bonghwa gun, Chilgok gun, Cheongsong gun according to residence-specified distribution and over aged 65, were focused to the elderly in rural areas with geographical characteristics where they have difficulties in accessibility of dental facilities and dental care. Methods: The collected data were analyzed by the SPSS 19.0 program. First, the frequency analysis was performed for each independent variable and the dependent variable. Second, reliability analysis and correlation analysis were conducted for daily living skills and Biomedical Vigilance. Third, multivariate analysis was performed in terms of and the post-administration management. Fourth, multiple regression analysis was performed to identify the factors affecting the post-management of dentures and the period of using dentures. Results: By results of the multiple regression analysis, the elder the subjects are(${\beta}$ = 0.03), the lower their income activities are(${\beta}$ = -0.18), the smaller their monthly allowances are(${\beta}$ = -0.16), the worse their daily activity skills are(${\beta}$ = -0.12), the more they were mounted their dentures by an unlicensed contractor(${\beta}$ = 0.07), and the more they cost to their dentures(${\beta}$ = 0.14), the longer the period of use dentures are. And the beneficiaries of Basic Livelihood Security(${\beta}$ = -0.14) who got free denture business are shorten the period of using dentures. According to multiple regression analysis for post management of dentures, the independent variables like the health education(${\beta}$ = 0.24), smoking(${\beta}$ = -0.18), periodic oral examination(${\beta}$ = 0.13), dentures mounted by an unlicensed contractor(${\beta}$ = -0.13) are shown statistically significant results. In that study subjects are taking part in health education and non-smokers, they are likely to have more chances to post management for their dentures like periodic oral examination. However the subjects who were weared their denture by an unlicensed contractor get less chance to post management for their dentures. Conclusion: As the elderly who want to wear denture are increasing due to the denture insurance for the elderly, the need for oral health education for the elderly is an urgent request, especially continuos education for the way of use their dentures and follow-up management for the elderly who were already mounted their dentures. And also, the need for more systematic researches is requested for securing objective data.