• 제목/요약/키워드: dentinal surface

검색결과 133건 처리시간 0.019초

2단계 접착제의 상아질 결합강도에 대한 Er:YAG 레이저 조사 영향 (Effect of Er:YAG lasing on the dentin bonding strength of two-step adhesives)

  • 송병춘;조영곤;이명선
    • Restorative Dentistry and Endodontics
    • /
    • 제36권5호
    • /
    • pp.409-418
    • /
    • 2011
  • 연구목적: 이 연구는 상아질 표면에 Er:YAG 레이저를 조사하지 않는 군, 레이저를 조사한 군, 레이저를 조사한 후 부가적인 산처리를 한 군으로 분류하여 2단계 단일병 전부식 접착시스템과 자가부식 프라이머 접착시스템을 이용하여 복합레진을 접착하였을 때 이러한 표면처리가 복합레진의 미세전단 결합강도와 결합계면에 미치는 영향을 비교하기 위하여 시행하였다. 연구 재료 및 방법: 32개의 발거된 대구치의 교합면측 상아질을 이용하였고, 상아질의 표면처리는 1군과 4군에서 각각 인산과 자가부식 프라이머로 하였으며, 2군과 5군은 Er:YAG 레이저로 에칭처리하였고, 3군과 6군은 레이저로 에칭한 후 다시 각각 인산과 자가부식 프라이머로 하였다. 1군, 2군, 3군은 Single Bond 2와 Z 250 (3M ESPE)을 이용하였고, 4군, 5군, 6군은 Clearfil SE Bond와 Clearfil AP-Z (Kuraray)을 이용하여 상아질 면에 Tygon tube를 접착하였다. 각 군의 미세전단 결합강도를 측정한 후 통계 처리하였고, 또한 6개의 시편에서 복합레진과 상아질 계면을 주사전자현미경하에서 관찰하였다. 결과: Single Bond 2를 사용한 군에서 2군의 결합강도는 1군과 3군보다 통계학적으로 낮게 나타났으며, Clearfil SE Bond를 사용한 군에서 4군, 5군, 6군의 결합강도는 각각 통계학적으로 유의한 차이를 나타내었다(p < 0.05). 2군과 5군은 아주 짧고 가는 레진테그가 관찰되었고, 3군과 6군은 길고 가는 레진테그와 레진테그의 측지가 관찰되었다. 결론: 레이저로 에칭 처리한 상아질에 대한 부가적인 산 처리나 자가부식 프라이머의 처리는 상아질의 접착력을 향상시켰다.

상아질-복합레진 접착계면의 파괴거동에 대한 연구 (A STUDY ON FRACTURAL BEHAVIOR OF DENTIN-RESIN INTERFACE)

  • 류길주;최기운;박상진;최경규
    • Restorative Dentistry and Endodontics
    • /
    • 제32권3호
    • /
    • pp.208-221
    • /
    • 2007
  • 파괴 인성 실험은 상아질-복합레진 계면의 파절 저항성을 평가할 수 있는 임상적으로 신뢰 할 만한 방법이다. 본 연구의 목적은 상아질-레진 계면의 파괴인성과 미세인장결합강도를 측정하여 이 두 실험방법이 상아질-레진 결합을 평가하는 데 가지는 유용성을 비교, 평가하는 것이다 파괴 인성 측정에는 short-rod 시편 형태를 이용하였다. 각 시편에서는 소의 하악절치에서 절단한 치아 절편을 포함시켜 결합면을 얻었다. 미세인장 결합강도 또한 소의 하악절치 순면을 연마하여 상아질을 노출시킨 후 상아질 접착제를 도포하고 레진 블록을 축조하여 측정하였다. 각 시편들은 $37^{\circ}C$ 증류수에 24시간 보관한 후 각 실험방법에 맞게 인장력을 가하여 측정치를 구하였다. 통계분석은 95% 신뢰수준의 ANOVA와 Tukey's test를 이용하였으며, 두 실험방법의 상관관계를 보기 위해 Pearson's 상관계수를 계산하였다. 전자현미경 검사를 통해 미세구조 또한 관찰하여 다음과 같은 결론을 얻었다. 1. 파괴인성은 SE군이 가장 높은 값을 나타냈으며, Adper Single Bond 2 (SB), OptiBond Solo (OB) ONE-STEP PLUS (OS), ScotchBond Multi-purpose (SM)군 순으로 나타났고, Clearfil SE Bond (SE)군은 다른 실험군에 비해 유의하게 높은 값을 나타내었으나 (p <0.05), 다른 실험군 사이에는 유의차가 없었다 (p > 0.05). 2. 미세인장결합강도는 SE군이 가장 높은 값을 나타냈으며, SB, OB, SM, 그리고 OS 순으로 나타났다. SB, OB, SM, SE군 사이에는 통계학적인 유의차가 없었으나 (p > 0.05), OS군의 미세인장결합강도는 다른 4개의 실험군에 비해 낮은 값을 나타내었다 (p < 0.05). 3. FE-SEM관찰에서 피막도가 두껍게 나타난 SM군, SE군과 피막도가 얇은 OS군, OB군, SB군 간에 파괴양상이 다르게 나타났다 즉 전자는 접착층 내 파괴가 일어난 반면, 후자는 resin tag나 레진 침투층 내에서 파절되는 양상을 나타내었다. 4. 파괴 인성과 미세인장결합강도 사이에는 통계학적으로 유의 한 상관 관계가 없었다 ($r^2=0.223$, t=0.927). 이와 같은 결과를 토대로, 상아질 접착제의 임상적 효율성을 평가하고자 할 때는 결합강도 뿐만 아니라. 파괴인성도 함께 고려하여 임상적용의 예견성을 높여야 한다고 결론내릴 수 있다.

인산용액의 농도 및 적용시간 차이에 따른 상아질 표면의 형태적 변화 (MORPHOLOGIC CHANGE OF DENTIN SURFACE ACCORDING TO THE DIFFERENCE IN CONCENTRATION AND APPLICATION TIME OF PHOSPHORIC ACID)

  • 김명수;온영석;이광원;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제23권1호
    • /
    • pp.141-161
    • /
    • 1998
  • The depth and patterns of demineralization according to the difference in concentration and application time of phosphoric acid were observed through the transmission electron microscope, and shear bond strengths to the acid -conditioned dentin were then measured and compared with the TEM results. To investigate the influence of polymer addition into the phosphoric acid and the effect of difference in concentration and application time of the acid, the specimens were randomly divided into 9 groups. Among the specimens, the exposed dentin surfaces were acid-conditioned with 10% polymer-thickened phosphoric acid(All Bond 2, Bisco, U.S.A.) and aqueous 10%, 20%, 30%, 40% phosphoric acid for 20 seconds, The rest of the specimens were acid-conditioned with 10% phosphoric acid for 15s, 30s, 60s, 120s respectively. The specimens were immersed in 4% glutaraldehyde in 0.1M sodium cacodylate buffer and postfixed with 1 % osmium tetroxide without decalcification and then observed under a JEOL Transmission Electron Microscope(JEM 1200 EX II, Japan). After the specimens were acid-conditioned as the above, primer and adhesive resin were applied to blot-dried dentin and shear bond strengths were then measured and analysed. The results were as follows : 1. The intertubular demineralization depth of 4.0-$5.0{\mu}m$ in 10% polymer-thickened phosphoric acid gels was similar or slightly deeper than that of 4.0-$4.5{\mu}m$ in aqueous 10% phosphoric acid solution. 2. The intertubular demineralization depth of aqueous 20%, 30% and 40% phosphoric acid solution was 6.5-$7.0{\mu}m$, 6.5-$7.5{\mu}m$ and 9.0-$15.0{\mu}m$ respectively. It showed that the depth of dentin demineralization is partly related to the concentration of phosphoric acid solution. 3. The intertubular demineralization depth of aqueous 10% phosphoric acid solution in application time for 15s, 30s, 60s and 120s was 2.5-$3.0{\mu}m$, 4.0-$6.0{\mu}m$, 6.5-$7.0{\mu}m$ and 8.5-$14.0{\mu}m$ respectively. It showed that the depth of dentin demineralization is directly related to the application time of phosphoric acid solution. 4. The partially demineralized dentin layer between demineralized collagen layer and unaffected dentin was showed to a width of 0.5-$1.0{\mu}m$ in lower concentration groups treated with aqueous 10% phosphoric acid for 20s, 60s, 120s and 20% phosphoric acid for 20s. 5. The demineralization effect at the border of intertubular-peritubular junction was less evident than that in the peritubular and intertubular dentin. The collagen fibers in the intertubular dentin had a random orientation, whereas those that lined the tubules were circumferentially aligned. The cross-linkage of dentinal collagen in demineralized collagen layer was clearly seen. 6. A statistically significant difference of bond strengths according to the difference in phosphoric acid concentration did not exist among the groups treated with 10%, 20%, 30% and 40% acid solution (P>0.05). However, bond strengths to the treated dentin with 10% phosphoric acid solution for 30s were significantly higher than that for 120s (P<0.05).

  • PDF