• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.2
• /
• pp.87-91
• /
• 2016

Pierre Robin syndrome (PRS) is characterized by the triad of congenital mandibular hypoplasia, glossoptosis and cleft palate. Infant PRS patients are frequently suffering from upper airway obstruction, gastroesophageal reflux and growth retardation caused by above mentioned problems. We report a dental caries treatment of 3-year old girl with Pierre Robin syndrome with multiple caries. The cause of multiple caries was mainly presumed as patient's eating habit caused by her general condition. She had some feeding problems and had history of gastric tube. She was still using milk bottle and took more than an hour to finish a meal. The treatment was performed under general anesthesia considering patient's condition; mild autism, poor cooperation and respiratory problem due to micrognathia. Severely affected upper incisors were treated with pulp treatment and restored with zirconia crown for esthetic purpose. Lower incisors were treated with pulp treatment and restored with composite resin. Upper right first primary molar was restored with stainless steel crown and other primary molars were treated with composite resin. There were no postoperative complications. According to her parents, the patient's compliance to oral hygiene management was greatly improved after the treatment since she was very pleased with the esthetic result and highly motivated by her looks. The treatment without sedation or general anesthesia would be possible once the airway is improved as the mandible grows.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.283-292
• /
• 2022

For fixed prosthetic treatment using implants, implants must be placed in a suitable location for prosthetic treatment. During surgery, minimally invasive prosthetic restoration is possible using a flapless method using a surgical guide. The patient in this case was an 86-year-old male patient who wanted treatment due to discomfort when using conventional dentures. Due to systemic disease, the patient had difficulty using removable local dentures, so full dentures for the maxilla and fixed implants for the mandible were restored. Because there is a high risk of bleeding due to systemic disease, the implant was placed in a flapless method using a surgical guide. Finally, prostheses were fabricated with maxillary full denture and mandibular screw-retained zirconia, and this report shows satisfactory esthetic and functional recovery.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.4
• /
• pp.226-236
• /
• 2021

PURPOSE. This study aimed to evaluate the effect of incorporating zirconium oxide nanoparticles (nano-ZrO₂) in polymethylmethacrylate (PMMA) denture base resin on flexural properties at different material thicknesses. MATERIALS AND METHODS. Heat polymerized acrylic resin specimens (N = 120) were fabricated and divided into 4 groups according to denture base thickness (2.5 mm, 2.0 mm, 1.5 mm, 1.0 mm). Each group was subdivided into 3 subgroups (n = 10) according to nano-ZrO₂ concentration (0%, 2.5%, and 5%). Flexural strength and elastic modulus were evaluated using a three-point bending test. One-way ANOVA, Tukey's post hoc, and two-way ANOVA were used for data analysis (α = .05). Scanning electron microscopy (SEM) was used for fracture surface analysis and nanoparticles distributions. RESULTS. Groups with 0% nano-ZrO₂ showed no significant difference in the flexural strength as thickness decreased (P = .153). The addition of nano-zirconia significantly increased the flexural strength (P < .001). The highest value was with 5% nano-ZrO₂ and 2 mm-thickness (125.4 ± 18.3 MPa), followed by 5% nano-ZrO₂ and 1.5 mm-thickness (110.3 ± 8.5 MPa). Moreover, the effect of various concentration levels on elastic modulus was statistically significant for 2 mm thickness (P = .001), but the combined effect of thickness and concentration on elastic modulus was insignificant (P = .10). CONCLUSION. Reinforcement of denture base material with nano-ZrO₂ significantly increased flexural strength and modulus of elasticity. Reducing material thickness did not decrease flexural strength when nano-ZrO₂ was incorporated. In clinical practice, when low thickness of denture base material is indicated, PMMA/nano-ZrO₂ could be used with minimum acceptable thickness of 1.5 mm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.354-359
• /
• 2018

In a single implant restoration of maxillary anterior teeth, it is difficult to accomplish an aesthetic restoration of the implant prosthesis in the case of gingival recession and bone defect problems. To maintain aesthetic stability in the long term, it is important to place the implant in the ideal position as well as the recovery of the soft tissue and harmony with the prosthesis. Not only ideal implant position but also the harmony with surrounding soft tissues are important to fabricate aesthetic implant prosthesis for these cases. for these cases, a 47- years -old male with lowered level of osseous crest and gingival recession on maxillary anterior tooth was treated with guided bone regeneration and gingival recontouring.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.299-306
• /
• 2017

In this case report, immediate loading of an implant-supported single-tooth prosthesis through complete digital workflow. A patient presented for restoration of missing a single tooth in the mandibular first molar. The digital impression was made with intraoral scanner and implant was placed using surgical guide pre-fabricated with pre-operative computed tomography (CT) and scan data. After 1 week later, prefabricated customized abutment and provisional restoration were connected for immediate loading. After 8 weeks later, abutment level impression was taken by intraoral scanner. At 3 months later from implant installation, monolithic zirconia crown were fabricated. This clinical report presents satisfying result in accuracy and patient satisfaction. A completely modeless digital procedure met expectations regarding precision, esthetics, and functionality.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.2
• /
• pp.73-80
• /
• 2002

치과용 임플란트의 세라믹 지대주를 위해 개발된 지르코니아 함유 세라믹 시편의 생체 적합성을 평가하기 위하여 시험관내 세포 독성을 검사를 시행하였다. L929 섬유모세포를 $37^{\circ}C$, 90% 습도, 5% CO2 및 95% 공기의 조건을 유지하는 세포 배양기에서 배양하여 실험에 사용하였다. 배양 2일, 4일, 6일 마다 시편을 넣은 배양 접시 내의 전체 세포 수와 생존 세포 수를 세어 세포 증식과 세포 생존율 검사를 시행하였다. millipore filter test를 이용하여 succinate dehydrogenase 효소 활성을 검사하였으며, 세포막 투과성의 변화를 관찰하기 위해 agar overlay test를 시행하였다. 음성 대조군은 시편을 사용하지 않았으며, 양성 대조군은 시편과 같은 크기의 구리를 사용하여, 다음과 같은 결과를 얻었다. 1. 세포 증식과 세포 생존율 검사에서는 지르코니아 함유 세라믹을 넣은 실험군과 음성 대조군 모두에서 시간이 경과함에 따라 세포가 증식하는 양상을 보였다. 세포 생존율 검사에서도 실험군과 음성 대조군이 유사한 결과를 나타내었다. 2. millipore filter test에서는 실험 시편 모두에서 염색 정도의 변화가 없이 음성 대조군과 동일한 결과를 나타냈다. 반면에 구리 시편을 넣은 양성 대조군에서는 중등도의 세포 독성을 나타냈다. 3. agar overlay test에서도 시편을 넣지 않은 음성 대조군에서는 세포 성장에 변화가 나타나지 않았으며, 실험군에서도 시편 주위로 탈색이 관찰되지 않아서 음성대조군과 같은 결과를 나타냈다. 양성 대조군에서는 심한 세포 독성을 나타내었다. 4. 실험결과, 치과용 임플란트의 세라믹 지대주를 위해 개발된 지르코니아 함유 세라믹 시편은 시험관내 세포 독성을 나타내지 않았다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.252-257
• /
• 2014

It is important to produce a provisional restoration reflecting the patient's jaw relation, occlusal plane, lip support, shape of teeth, and occlusion type for fully edentulous patients before making a definite prosthesis. The patient introduced in this study showed bad prognosis of remained tooth after severe periodontal diseases. Therefore, remaining teeth were extracted and replaced with dental implants. Provisional restorations were fabricated and the the patient's vertical and horizontal jaw relationship, occlusal plane, amount of overjet and overbite, size of teeth, and length of anterior tooth were recorded. Provisional restorations were scanned and CAD/CAM techniques were used to fabricate a monolithic zirconia bridge, which contour is identical with the provisional restorations. The patient was satisfied with the treatment results on functional, esthetic aspects and the prosthesis retained stable during the four-month clinical observation period.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.425-431
• /
• 2011

The industrial manufacturing of YSZ products can be summarized as a three step process: a) hydrolysis of zirconyl chloride and mixing of other solutions, b) precipitation, and c) calcination. The addition of ammonia or OH- is essential in the precipitation process. However, a strong agglomeration was observed in the results of an ammonia or OH- addition. Thus, it is necessary to disperse the powders smoothly in order to improve the mechanical strength of YSZ. In this study, YSZ was synthesized using the urea stabilizer and hydrothermal method. YSZ powders were synthesized using a hydrothermal method with Teflon Vessels at $180^{\circ}C$ for 24 h. The mole ratio of urea to Zr was 0, 0.5, 1, and 2. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens ($33\;mm{\times}8\;mm{\times}1{\pm}0.5\;mm$) for three-point bend tests were used in the mechanical properties evaluation. The crystalline of YSZ powders observed a tetragonal phase in the sample with a ratio of Zr:urea = 1:2 addition and a hydrothermal reaction time of 24 h. The average primary particle size of YSZ was measured to be 9 nm to 11 nm. The agglomerated particle size was measured from 15 nm to 30 nm. The three-point bending strength of the YSZ samples was 142.47 MPa, which is the highest value obtained for the Zr:urea = 1:2 ratio addition YSZ sample.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.79-87
• /
• 2017

The open bite malocclusion is a common clinical entity and has multifactorial causes. Development of effective treatment plan and management is dependent on proper diagnosis. The skeletal open bite patient requires a coordinated orthodontic and orthognathic surgical approach to achieve stable occlusion, acceptable esthetics, and improved function. But in case of open bite with severely decayed dentition, restoration in the entire dentition is necessary. Using the facial analysis and diagnostic wax-up, the most effective treatment was prosthetic rehabilitation. The provisional restorations were fabricated to satisfy esthetic and functional requirements, which result in the uniformly distributed occlusal force, anterior and canine guidance. The inter-arch relationship, labio-dental harmony, and the soft tissue aspect, which is important to estimate the longevity were evaluated. Definitive restorations of monolithic zirconia were made by replicating provisional restorations by using the latest CAD/CAM technology. They were delivered to the patient and clinical follow-up observation was satisfactory.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.399-406
• /
• 2013

Reports about the intrusion of a natural tooth bounded by implants are very rare, although some concerns have been discussed on the intrusion of teeth connected to implants. A female aged 56 years received an implant (mandibular right first premolar) and post/core onto root rest (mandibular right second premolar) and was restored by single zirconia crown, respectively. Molars were implant restorations. Four month after loading, second premolar was intruded and prominent gap was shown between opposite tooth. Because nonspecific discomfort was expressed, observation was decided after explanation of prognosis of tooth without treatment. Three month later reversal to original position was detected on the periapical radiographs and fully recovered position with intimate contact was completed 11 more months later. Till now 2 years and 3 month observation is being performed. Through the observation of spontaneous recovery of a natural tooth bounded by implants, the cause of intrusion and a mechanism of spontaneous recovery could be estimated.