• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.436-448
• /
• 1997

Topical fluoride application for children is a widely performed procedure in the field of Pediatric Dentistry for its dental caries prevention effects. However, it is recently recognized as having some unwanted effects on several esthetic restorative materials as it roughens the surfaces of the restorative materials. In order to evaluate the surface changes in esthetic restorative materials, the author immersed composite resin, glass ionomer cement, and resin-modified glass ionomer cement specimens in various topical fluoride agents and measured the weight loss and also, examined the specimens under the scanning electron microscope. The followings are the results : 1. All the specimens immersed in APF gel for 4 minutes showed statistically significant weight loss. (paired t-test, P<0.05). 2. There was no statistically significant weight loss for the resin-modified glass ionomer cement and composite resin groups immersed in sodium fluoride solution (paired t-test, P>0.05). 3. When the glass ionomer cement group was immersed in APF gel for 1 and 4 minutes, there was a statistically significant weight loss compare to other esthetic restorative materials (ANOVA, P<0.05). 4. In the resin-modified glass ionomer cement group and the composite resin group, weight loss in the APF gel 4 minutes immersion group was greater than the 1 minute immersion group, and it was statistically significant (ANOVA, P<0.05). 5. When the specimens were examined under scanning electron microscope, the surface changes were greatest in the order of glass ionomer cement, resin-modified glass ionomer cement, composite resin and also in the order of APF gel 4 minute immersion group, 1 minute immersion group, sodium fluoride immersion group, and control group.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.468-476
• /
• 1998

The purpose of this study was to observe the morphologic change of dentinal surface, adhesion in interface between dentin and bonding agents, and penetration pattern of resin tags into dentinal tubles according to bonding procedure of ONE-STEP universal adhesive system. Ten extracted human molars were mounted in dental stone and sectioned to expose mid-coronal occlusal dentin and again sectioned tooth crown apically. Specimens were randomly assigned to three groups for dentin conditioning with 32% phoshoric acid, two coats of bonding agents after dentin conditioning, and bond of composite resin. The surfaces of dentin were treated with etch ant and applied bonding agent, and bonded composite resin according to the directions of manufacturer. Specimens which were boned composite were sectioned longitudinally for observing interfaces between resin and dentin. Two of specimens which were sectioned longitudinally were immersed in 6 N HCL for 30 seconds and 1% NaOCL for 12 hours to partially demineralize and deproteinize the dentin substrate. Each specimen was mounted on a brass stub, sputter-coated with gold and observed under SEM. The result were as follows : 1. On the dentinal surface which was conditioned with 32% phosphoric acid. the smear layer was completely removed. orifices of dentinal tubules were opened 3-$5{\mu}m$ wide. and dentinal surface was irregular. 2. On the dentinal surface which was applied ONE-STEP. bonding agent. resin particles were observed on the orifices of dentinal tubules and intertubular dentin. 3. There were close adaptation between dentin and resin and were the pattern which composite invaded into dentin. 4. 1-$3{\mu}m$-wide hybrid layer was visible in the interface between dentin and resin. 5. Long and funnel shaped resin tags were observed in demineralized specimens. and the surfaces of tags were rough.

• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.310-318
• /
• 2014

Objectives: This study examined the influence of the resin thickness on the polymerization of silorane- and methacrylate-based composites. Materials and Methods: One silorane-based (Filtek P90, 3M ESPE) and two methacrylate-based (Filtek Z250 and Z350, 3M ESPE) composite resins were used. The number of photons were detected using a photodiode detector at the different thicknesses (thickness, 1, 2 and 3 mm) specimens. The microhardness of the top and bottom surfaces was measured (n = 15) using a Vickers hardness with 200 gf load and 15 sec dwell time conditions. The degree of conversion (DC) of the specimens was determined using Fourier transform infrared spectroscopy (FTIR). Scratched powder of each top and bottom surface of the specimen dissolved in ethanol for transmission FTIR spectroscopy. The refractive index was measured using a Abbe-type refractometer. To measure the polymerization shrinkage, a linometer was used. The results were analyzed using two-way ANOVA and Tukey's test at p < 0.05 level. Results: The silorane-based resin composite showed the lowest filler content and light attenuation among the specimens. P90 showed the highest values in the DC and the lowest microhardness at all depth. In the polymerization shrinkage, P90 showed a significantly lower shrinkage than the rest two resin products (p < 0.05). P90 showed a significantly lower refractive index than the remaining two resin products (p < 0.05). Conclusions: DC, microhardness, polymerization rate and refractive index linearly decreased as specimen thickness linearly increased. P90 showed much less polymerization shrinkage compared to other specimens. P90, even though achieved the highest DC, showed the lowest microhardness and refractive index.

• 대한소아치과학회지
• /
• 제34권2호
• /
• pp.255-263
• /
• 2007

복합레진 수복은 치아우식 및 치아우식 예방치료를 위한 대표적인 술식으로 소아치과 영역에서 널리 시행되고 있으며 불소도포는 치아우식 예방을 위한 대표적인 술식으로 1년에 2번 장도 실시되고 있다. 하지만 이러한 이점에도 불구하고 Acidulated phosphate fluoride(APF)가 복합 레진의 표면을 거칠게 한다는 부작용에 대한 논란이 있다. 이에 본 연구에서는 불소도포가 복합레진의 표면에 미치는 영향을 평가하기 위해 시판용 레진인 Solitaire $2^{(R)}$(Heraeus Kulzer, Germany), Metafil $CX^{(R)}$(Sun medical, Japan), Composan $LCM^{(R)}$(Promedica, Germany), $Charmseal^{(R)}$(DenKist, Korea)을 이용하여 시편을 제작하고, 불소젤은 $Topex^{(R)}$(Sultan Dental Products, Canada)를 각각 1분과 4분동안 도포시킨 후 변화를 관찰하여 다음과 같은 결과를 얻었다. 1. 불소젤을 도포시키지 않은 대조군에서 가장 평활한 표면을 보였으며 1분군, 4분군 순으로 표면 거칠기가 증가하였다. 그리고 Composan $LCM^{(R)}$을 제외한 모든 제품에서 유의한 차이를 보였다(p<0.05). 2. 국소도포용 불소젤을 도포한 각 레진 시편의 무게 차이를 비교한 결과 대조군, 1분군, 4분군 간에 유의한 차이는 없었다(p>0.05). 3. 주사전자현미경 관찰시 불소젤을 도포시킨 실험군은 대조군에 비해 거친 표면을 나타내었다.

• 구강회복응용과학지
• /
• 제30권2호
• /
• pp.145-151
• /
• 2014

목적: 본 연구는 두가지 다른 방법에 의한 레진강화형 글래스 아이오노머(RMGI) 이장재의 적용이 2급와동 복합레진수복의 미세누출에 미치는 영향을 조사하고자 하였다. 연구 재료 및 방법: 36개의 발치한 치아에 2급 와동을 형성한 뒤 무작위로 3개의 군으로 나누었다. 1군은 대조군으로 이장재를 적용하지 않았으며, 2군은 치과용 탐침으로 RMGI 이장재 적용, 3군은 특별히 고안된 버로 RMGI 이장재를 적용한 뒤 복합레진은 똑같이 통상적인 방법으로 적층수복하였다. 2% 메틸렌 블루 염색한 뒤 치아장축과 평행하게 순설 방향으로 절단하여 미세누출을 현미경과 컴퓨터 프로그램을 사용하여 분석을 하였다. 데이터는 Kruskal-Wallis test와 Mann-Whitney U-test (P < 0.05)로 분석하였다. 결과: RMGI 이장재가 적용된 군은 그렇지 않은 군보다 월등히 적은 미세누출을 보였으며, 특히 특수 고안된 버를 사용한 군의 50%에서는 전혀 미세누출을 보이지 않았다. 그러나, 2군과 3군의 결과에서 통계적으로 유의한 차이는 관찰되지 않았다. 결론: 2급와동의 복합레진 수복에서 RMGI 이장재는 그 적용 방법에 관계없이 미세누출을 감소시키는데 효과적인 재료이다.

• 대한치과의사협회지
• /
• 제15권11호
• /
• pp.757-761
• /
• 1977

The purpose of this study was to evaluate the marginal sealing ability of Hipol composite resin. Using freshly extracted human teeth and 2% acquous methylene blue, the marginal leakage of dye in restorative materials such as Hi-pol, Adaptic, Nuvasystem, Epolite and Amalgam was investigated at 37℃ and under temperature cycling between 4℃ and 60℃. The results were as follows; 1. All the filling materials revealed the penetration of dye between cavity walls and restorations. 2. Hi-pol and Adaptic showed more marginal leakage than other materials and the degree of dye penetration in Hi-pol was similar to that of Adaptic. 3. Nuva system showed the least marginal leakage at 37℃ and under temperature cycling between 4℃ and 60℃. 4. Under temperature cycling, all materials showed a slight increase in marginal leakage except Epolite, which showed the greastest change in leakage.

• 대한치과의사협회지
• /
• 제11권5호
• /
• pp.337-340
• /
• 1973

The authers have studied the marginal leakage on various filing materials : Composite resin, Polycarboxylate cement, Zinc phosphate cement, Silicate cement and Zinc-oxide eugenol cement, by means of penetration of 2% aquous methylene blue between cavity walls and filing materials at body temperature and at thermal changs in the range of 4~60℃ The results revealed as follows. 1) All the filling materials revealed the penetration of dye between cavity walls and filling materials. 2) Zinc-oxide eugenol cement was the most effective to prevent the dye penetration on the contrary silicate cement cases showed greatest leakage at 37℃ and at temperature changes in range of 4-60℃. 3) The composite resin showed moderate leakage either at 37℃ or at thermal changes 4) Marginal obstructions of polycarboxylate cement were unsatisfactory at 37℃ and at temperature changes.

• 공업화학
• /
• 제16권5호
• /
• pp.672-676
• /
• 2005

치아수복용 고분자 복합체(polymeric dental restorative composite, PDRC)의 전치부와 구치부에의 응용 가능성을 높이고자 PDRC를 구성하는 실리카 충진재를 다양한 온도에서 열처리시켜 siloxane 기로 연결된 구조의 개질된 실리카를 제조하고 이를 PDRC 제조에 사용하였다. 제조된 PDRC의 중합 특성을 중합전환률, 중합깊이, 그리고 체적 중합수축률 등을 분석하여 고찰하였다. 실험 결과, 사용된 실리카의 열처리 온도가 높아짐에 따라 제조된 PDRC의 중합깊이는 감소하였고 체적 중합수축률과 중합전환률 값은 실리카 입자의 평균크기 감소에 따른 PDRC 내 resin matrix의 상대적 양의 증가로 인해 일정하게 증가함을 알 수 있었다.

• 대한치과보철학회지
• /
• 제52권3호
• /
• pp.202-210
• /
• 2014

목적: 이 연구의 목적은 abfraction병소가 있는 금속도재관수복 치아를 수복하거나 하지 않을 때 나타나는 응력집중과 분포를 유한요소분석으로 평가하는 것이다. 재료 및 방법: 상악 제1 소구치를 선정하여 총 10개의 유한요소모델을 만들었다. 모델 1은 자연치; 모델 2는 협측과구개측 백악법랑경계 상방 2 mm에 변연이 위치한 금속도재관; 모델 3은 협측과구개측 백악법랑경계에 변연이 위치한 금속도재관; 모델 4는 abfraction병소를 가진 자연치; 모델 5와 6은 다른 조건은 각각 모델 2와 3과 동일하면서 abfraction병소를 가진 치아; 모델 7은 abfraction병소를 가지고 composite resin으로 수복된 자연치;모델 8과 9는 각각 모델 5와 6과 동일한 모델에 abfraction병소를 composite resin으로 수복한 후 금속도재관 장착한 치아; 모델 10은 composite resin으로 abfraction lesion을 수복하고 금속도재관의변연을 abfraction병소보다 하방에 위치시킨 치아였다. 위치를 서로 달리한 하중 load A와 load B를 가하여, 각 기준점에서의 von Mises stress값들을 측정하여 비교하였다. 결과: Abfraction병소가 있는 치아에 load A 또는 load B를 주었을 때, 응력은 lesion의 apex에 집중되었다. 반면, abfraction병소를 composite resin으로 충전한 치아에 load A 또는 load B를 주었을 때 응력값은 apex에서 감소하였다. 결론: Abfraction이 있는 치아는 복합 레진으로 수복해주는 것이 응력의 집중을 줄여서 병소의 예후에 유리한 것으로 나타났으며, Abfraction이 발생된 치아를 금속 도재관으로 수복할 경우 협측변연을 법랑질 상에 위치시키는 것이 유리하였다.

• 대한치과보철학회지
• /
• 제40권2호
• /
• pp.201-212
• /
• 2002

This study investigated the shear bond strengths between abrasion-resistant denture teeth and composite resins according to surface treatments. Denture teeth for this study were Trubyte IPN teeth(Dentsply Inc., USA) with interpenetrating polymer network and Endura Posterio (Shofu Inc. Japan) of composite resin teeth, and restorative composite resins were Clearfil FII (Kuraray, Japan) of the self-cured composite resin and Z100(3M Dental Product, USA) of the light-cured composite resin. Five different surface treatments were evaluated: (1) $50{\mu}m\;A1_2O_3$ sandblasting: (2) #100 carbide paper; (3) chloroform; (4) retentive holes; and (5) no treatment. After surface treatments, denture teeth were examined by scanning electron microscopy(SEM), and the maximum shear bond strengths between abrasion-resistant denture teeth and composite resins were measured using Instron. The results were as follows; 1. IPN teeth treated with sandblasting had the highest shear bond strength, and Endura treated with sandblasting and carbide paper had significantly greater shear bond strength than with any other surface treatment. 2. Regardless or composite resins, the shear bond strength on Endura was greater than on IPN teeth. 3. Regardless of denture teeth, the shear bond strength of Clearfil FII was greater han of Z100. 4. In appearance of SEM, IPN teeth treated with sandblasting showed generalized roughness on the all of surface, however, carbide paper treatment resulted in partly rough. Endura treated with sandblasting and carbide paper showed similar surface characteristics. Wetting denture teeth surface with chloroform removed the debris and created a particle-free and smooth surface.