• Restorative Dentistry and Endodontics
• /
• 제37권2호
• /
• pp.84-89
• /
• 2012

Objectives: This study analyzed the difference in color caused by different thickness in enamel layer of composite resins when applied with single and layering placement technique, and evaluated if the results agreed with the shade guide from the manufacturers to verify reliability of the color matching process of the manufacturers. Materials and Methods: For single composite resin samples, 6 mm diameter and 4 mm thickness cylindrical samples were fabricated using Ceram-X mono (DENTSPLY DeTrey) and CIE $L^*a^*b^*$ values were measured with spectrophotometer. Same process was done for layering composite resin samples, making 3 dentinal shade samples, 4 mm thickness, for each shade using Ceram-X duo (DENTSPLY DeTrey) and enamel shade resins were layered in 2 mm thickness and CIE $L^*a^*b^*$ values were measured. These samples were ground to 0.2 mm thickness each time, and CIE $L^*a^*b^*$ values were measured to 1 mm thickness of enamel shade resin. Results: Color difference (${\Delta}E^*$) between single and layering composite resin was 1.37 minimum and 10.53 maximum when layering thicknesses were between 1 mm and 2 mm and 6 out of 10 same shade groups suggested by manufacturer showed remarkable color difference at any thickness (${\Delta}E^*$ > 3.3). Conclusion: When using Ceram-X mono and duo for composite resin restoration, following the manufacturer's instructions for choosing the shade is not appropriate, and more accurate information for Ceram-X duo is needed on the variation and expression of the shades depending on the thickness of the enamel.

• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.296-302
• /
• 2014

Objectives: It is difficult to achieve adhesion between resin cement and zirconia ceramics using routine surface preparation methods. The aim of this study was to evaluate the effects of $CO_2$ and Er:YAG laser treatment on the bond strength of resin cement to zirconia ceramics. Materials and Methods: In this in-vitro study 45 zirconia disks (6 mm in diameter and 2 mm in thickness) were assigned to 3 groups (n = 15). In control group (CNT) no laser treatment was used. In groups COL and EYL, $CO_2$ and Er:YAG lasers were used for pretreatment of zirconia surface, respectively. Composite resin disks were cemented on zirconia disk using dual-curing resin cement. Shear bond strength tests were performed at a crosshead speed of 0.5 mm/min after 24 hr distilled water storage. Data were analyzed by one-way ANOVA and post hoc Tukey's HSD tests. Results: The means and standard deviations of shear bond strength values in the EYL, COL and CNT groups were $8.65{\pm}1.75$, $12.12{\pm}3.02$, and $5.97{\pm}1.14MPa$, respectively. Data showed that application of $CO_2$ and Er:YAG lasers resulted in a significant higher shear bond strength of resin cement to zirconia ceramics (p < 0.0001). The highest bond strength was recorded in the COL group (p < 0.0001). In the CNT group all the failures were adhesive. However, in the laser groups, 80% of the failures were of the adhesive type. Conclusions: Pretreatment of zirconia ceramic via $CO_2$ and Er:YAG laser improves the bond strength of resin cement to zirconia ceramic, with higher bond strength values in the $CO_2$ laser treated samples.

• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.152-154
• /
• 1998

• Imaging Science in Dentistry
• /
• 제48권2호
• /
• pp.87-96
• /
• 2018

Purpose: The present study aimed to evaluate which of the following imaging methods best assessed misfit at the tooth-restoration interface: (1) bitewing radiographs, both conventional and digital, performed using a photostimulable phosphor plate (PSP) and a charge-coupled device (CCD) system; (2) panoramic radiographs, both conventional and digital; and (3) cone-beam computed tomography (CBCT). Materials and Methods: Forty healthy human molars with class I cavities were selected and divided into 4 groups according to the restoration that was applied: composite resin, composite resin with liner material to simulate misfit, dental amalgam, and dental amalgam with liner material to simulate misfit. Radiography and tomography were performed using the various imaging methods, and the resulting images were analyzed by 2 calibrated radiologists. The true presence or absence of misfit corresponding to an area of radiolucency in regions subjacent to the esthetic and metal restorations was validated with microscopy. The data were analyzed using a receiver operating characteristic (ROC) curve, and the scores were compared using the Cohen kappa coefficient. Results: For bitewing images, the digital systems (CCD and PSP) showed a higher area under the ROC curve (AUROC) for the evaluation of resin restorations, while the conventional images exhibited a larger AUROC for the evaluation of amalgam restorations. Conventional and digital panoramic radiographs did not yield good results for the evaluation of resin and amalgam restorations (P<.05). CBCT images exhibited good results for resin restorations(P>.05), but showed no discriminatory ability for amalgam restorations(P<.05). Conclusion: Bitewing radiographs (conventional or digital) should be the method of choice when assessing dental restoration misfit.

• 구강회복응용과학지
• /
• 제26권3호
• /
• pp.339-347
• /
• 2010

이전에 존재하던 컴포지트와 새로운 컴포지트 사이의 결합강도의 강화는 미세 기계적 유지를 증진하기 위한 표면 거칠기의 증가가 필요하다. 이 연구는 시효처리 후의 레진 컴포지트의 repair 결합강도에 다른 표면처리의 효과를 평가하는 것이다. 알루미늄 옥사이드를 이용한 air abrasion, chair-side silica coating한 그룹들에서 대조군과 불산 적용에 비하여 유의하게 높은 결합강도를 보였다. 레진 수복물의 repair시에 air abrasion의 사용은 필요한 것으로 보이며 부가적으로 silane의 적용은 결합강도에 긍정적 영향을 미치는 것으로 보인다.

• 대한치과보철학회지
• /
• 제51권1호
• /
• pp.27-32
• /
• 2013

연구 재료 및 방법: 본 연구에서는 간접 레진 수복시에 상아질 접착제와 저점도 레진을 이용한 상아질 레진코팅법을 자가 접착 레진 시멘트에 적용해 전단결합강도가 증가하는지 비교하고 기존의 레진 시멘트와의 전단결합강도 차이가 어떠한지 평가하고자 하였다. 연구 목적: 사람의 발거된 건전한 구치 36개의 치관부를 삭제하고 상아질을 노출시킨 후 3개의 군으로 분류하였다. 1군과 3군은 상아질에 아무런 처리 과정을 거치지 않고 2군만 Clearfil SE bond와 Metafil Flo를 사용해 상아질 레진코팅법을 시행하였다. 24시간의 임시수복 기간을 둔 후 Tescera를 이용하여 제작한 레진 인레이 블록을 1군과 2군에는 Unicem, 3군에는 Panavia F를 사용해 접착하였다. 그 후 증류수에 48시간 동안 보관한 후 전단결합강도를 측정하였다. 측정된 전단결합강도는 one-way ANOVA를 이용하여 비교 분석하였으며 유의한 차이가 있는 경우 Tukey method를 이용하여 multiple comparison를 시행하였다. 결과:상아질에 레진코팅법을 시행한 경우의 Unicem의 결합강도가 상아질에 아무런 처리를 하지 않은 대조군의 결합강도보다 높게 나타났고(P<.0001), 레진코팅을 하지 않고 Panavia F로 접착한 실험군의 결합강도보다 높게 나타났다(P<.0001). 결론: 상아질 레진코팅법은 자가 접착 레진 시멘트의 접착 강도를 증가시켰다.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.464-471
• /
• 2000

The fracture and wear behavior of dental composite resins containing prepolymerized particle fillers were investigated. Composite resins such as Metafil, Silux Plus, Heliomolar and Palfique Estelite were selected as specimens and contents of filler in specimens in order to evaluate the effect of prepolymerized particle fillers in fracture and wear characteristics. Ball on flat wear tester was used for the wear test at room temperature. The friction coefficient of Metafil was quite high relatively, and the wear resistances of Silux Plus and Palfique Estelite were better than those of Metafil and Heliomolar at the same experimental condition. It was found that the main wear mechanism was abrasive wear containing of plastic deformation of dental material.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.413-423
• /
• 1998

Dental ceramics exhibit excellent esthetic property, compressive strength, chemical durability, biocompatibility and translucency. This study evaluated the shear bond strength of composite resin to the new heat-pressed ceramic material (IPS-Empress System) depending on the surface treatments and bonding agents. The surface treatments were etching with 4.0% hydrofluoric acid, application of silane, and the combination of the two methods. Composite resin was bonded to ceramic with four kinds of dentin bonding agents(All-Bond 2, Heliobond, Scotch bond Multi-purpose and Tenure bonding agents). The ceramic specimen bonded with composite resin was mounted in the testing jig, and the universal testing machine(Zwick 020, Germany) was used to measure the shear bond strength with the cross head speed of 0.5 mm/min. The results obtained were as follows 1. The mean shear bond strength of the specimens of which the ceramic surface was treated with the combination of hydrofluoric acid and silane before bonding composite resin was significantly higher than those of the other surface treatment groups(p<0.05). 2. In the case of All-Bond 2 and Scotchbond Multi-purpose bonding agent group, the surface treatment methods did not influenced significantly on the shear bond(p>0.05). 3. Of the four bonding agents tested, the shear bond strength of Heliobond was significantly lower than those of other bonding agents regardless of the surface treatment methods(p<0.05). 4. The highest shear bond strength($12.55{\pm}1.92$ MPa) was obtained with Scotchbond Multipurpose preceded by the ceramic surface treatment with the combination of 4% hydrofluoric acid and silane.

• Restorative Dentistry and Endodontics
• /
• 제46권2호
• /
• pp.23.1-23.11
• /
• 2021

Objectives: This study assessed the reliability of digital color measurements using images of resin composite specimens captured with a cellphone. Materials and Methods: The reference color of cylindrical specimens built-up with the use of resin composite (shades A1, A2, A3, and A4) was measured with a portable spectrophotometer (CIELab). Images of the specimens were obtained individually or pairwise (compared shades in the same photograph) under standardized parameters. The color of the specimens was measured in the images using RGB system and converted to CIELab system using image processing software. Whiteness index (WI_D) and color differences (ΔE₀₀) were calculated for each color measurement method. For the cellphone, the ΔE₀₀ was calculated between the pairs of shades in separate images and in the same image. Data were analyzed using 2-way repeated-measures analysis of variance (α = 0.05). Linear regression models were used to predict the reference ΔE₀₀ values of those calculated using color measured in the images. Results: Images captured with the cellphone resulted in different WI_D values from the spectrophotometer only for shades A3 and A4. No difference to the reference ΔE₀₀ was observed when individual images were used. In general, a similar ranking of ΔE₀₀ among resin composite shades was observed for all methods. Stronger correlation coefficients with the reference ΔE₀₀ were observed using individual than pairwise images. Conclusions: This study showed that the use of cellphone images to measure the color difference seems to be a feasible alternative providing outcomes similar to those obtained with the spectrophotometer.

• 치위생과학회지
• /
• 제12권5호
• /
• pp.477-485
• /
• 2012

본 연구는 레진 종류별 착색음식물별 착색시간별 착색정도와 연마, 과산화수소에 의한 미백 후의 색 변화를 관찰하여 착색과 미백이 레진의 CIELAB 색 표시계와 반사율에 미치는 영향을 알아보고자 한하였다. 시편은 동일 회사의 전구치부겸용 레진(A2), 유동형 레진(A2)을 가로, 세로 11 mm, 높이 3 mm의 직육면체모양으로 30초간 광중합한 시편 총 36개를 사용하였다. 착색원으로는 김치국물, 고추장, 카레, 블루베리즙, 홍차와 대조군으로 증류수를 사용하였으며 각 레진당 음식물별 3개의 시편을 사용하였고 측정은 윗면과 아랫면을 측정하여 각 6개면을 측정하였다. 착색기간은 총 8일, 35% 과산화 수소에 의한 미백은 1시간이 소요되었고, 음식물의 시간에 따른 착색 정도와, 미백 후의 반사율과 색값은 분광광도계를 이용하여 측정하였다. 그 결과, 1. 음식물별 시간에 따른 착색의 정도는 전구치부겸용 레진과 유동형 레진 모두에서 착색 1일차부터 L, a, b값과 반사율에서 모두 통계적으로 유의한 차이가 있었으며(p<0.05), 그 중 블루베리와 카레의 L, a, b값 변화가 크게 나타났다. 2. 음식물별 시간에 따른 착색후 반사율은 블루베리와 고추장이 대조군에 비해 유의하게 감소하였기 때문에(p<0.05) 같은 L, a, b값이더라도 블루베리, 고추장 착색 레진이 시각적으로 더 어둡게 보였다. 3. 전구치부겸용 레진은 과산화수소 미백과 연마를 한 경우가 단일 방법에 비해 ${\Delta}{E_{ab}}^2$의 값이 유의하게 변하였다(p=0.022). 그러나, 유동형 레진에서는 미백 방법에 따른 유의성은 없었다(p=0.385). 레진의 색 안정성을 위해서 착색이 심한 카레와 블루베리의 섭취빈도를 낮추도록 하거나 섭취 후 가급적 빠른 시간내에 입안을 헹구는 것이 레진수복물의 색 안정성을 유지시킬 것으로 사료되었다.