• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.2
• /
• pp.175-182
• /
• 2013

The purpose of this study was to observe and analyze the initial marginal bone resorption changes according to the patterns of cover screw exposures during healing period followed by implants installation. Total 64 fixtures(TiUniteTM, NobelBiocare, Sweden) were installed in partially edentulous jaws of 28 patients, who were selected retrospectively and were shown at least one cover screw exposure. Cover screw exposures were defined at 1 month recall. According to the patterns of exposures, groups were categorized into group 1 (No exposure), group 2 (pin-point exposure), group 3 (less than 1/2 of cover screw), group 4 (more than 1/2 of cover screw), group 5 (total exposure). Periapical radiographs were taken in purpose of changes of marginal bone level between installation and 2 month recall. Healing abutments were secured on the exposure groups at 2 month recall. Results were as follows: 1. Marginal bone resorptions were identified whenever cover screws were exposed. 2. Group 2 and 3 were shown significantly increased bone loss more than other group (P <.05). 3. Group 4 and 5 were shown significantly increased bone loss more than group 1, however, less than other groups ( P <.05). Conclusionally, cover screw exposure may cause marginal bone resorptions, therefore, early connection of healing abutment is clinically helpful.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.1_2
• /
• pp.146-153
• /
• 1992

In the outpatient clinic, we have many patients who suffer from temporomandibular joint disorders. These vary from MPD syndrome to osteoarthrosis, and many cases have tender spots or areas on the temporomandibular joint region and/or masticatory muscles. Further, they frequently have masticatory muscle pain when opening the jaw. This paper presents the results of our research on the differential diagnosis for tendernesses and pain on opening the jaw in the temporomandibular joint region and the masticatory muscles by joint cavity pumping with local anesthestic. The areas of tenderness and jae-opening paw in 65 patient suffering from temporomandibular joint disorder were examined and recorded before and after anesthetizing the upper joint cavity with 2% lidocaine. Maximum interincisal distance was similarly recorded. The results were as follows : In the area surrounding the upper joint cavity including the lateral pterygoid muscle, the tenderness and jaw-opening pain vanished almost entirely after anesthesia. This was considered a direct infiltrative effect of the local anesthesia. After the anesthesia, 86% of the tendernesses on the sternocleidomastoid muscles, and 66% of those on the posterior belly of the diagstric muscles vanished, while the disappearance rates on the masseter, temporal, and medial pterygoid muscles were 50~60%. Apart from the temporomandibular region, pain on opening the jaw was found on the masseter, temporal, posterior belly of the digastric muscles, and medial pterygoid muscles before anesthesia. The disappearance rates after anesthesia were 90~100% except for the pain of the posterior belly of the digastric muscles, for which the rate was 66%. These results suggest that more than 88% of the tendernesses on the sternocleidomastoid muscle, more than 60% of the tendernesses and jaw-opening pains on the digastric muscle, and more than half of the tendernesses and almost all of the jaw-opening pains in the jaw-closing muscles are referred pains from the temporomandibular joint. The tendernesses that had no change after anesthesia were considered to be derived from spasms of the muscles proper. Generally, maximum interincisal distance increased after anesthesia. The average distance was 34mm before anesthesia, but increased to 41mm after anesthesia. In a few cases, however little or no change was found in those distances. In these cases, pathological changes were found in the joint cavities arthrographically or arthroscopically.

• Journal of Korean Clinical Health Science
• /
• v.7 no.2
• /
• pp.1325-1336
• /
• 2019

Purpose. Infant oral health care forms the basis of lifelong health, and the role of child care teachers in contributing to the quality level in the formation of correct habits at this time throughout the infant's health care and education is very important. The purpose of this study was to examine the relationship between the perceived oral health status of nursery teachers and the necessity of oral health education, and to emphasize that the oral health of teachers is closely related to the oral health of infants and young children. Methods. This study was conducted from May to June 2018 by surveying private nursery teachers in some parts of Gyeongsangbuk-do province by using the self-entry method. The research tools consisted of the general characteristics of subjects, subjective oral health status, oral health practice, oral health education awareness, and oral health education needs. We used shceffe as a post hoc test to compare the differences between groups after frequency analysis, independent t-test, and one-way ANOVA analysis. The linear regression analysis was conducted to determine the relationship between perceived oral health status, oral health practice and awareness, and oral health education needs. The statistical level was .05. Results. According to the results of this study, the oral health related practice according to the demographic characteristics is at the final education level, and the oral health related awareness is age, marital status and oral health education needs. The results showed statistically significant differences in final educational attainment and cohabitation. Regarding the relationship between perceived oral health status, oral health related practice and awareness, and oral health education needs There were significant differences in oral health practice(β =.329) and oral health education needs (β =.158). Conclusion. Based on the above results, the child care facility can emphasize the importance of the role of the child care teacher in the oral health care of infants, and the basic data for the establishment of the child care management program in the future by reflecting the role of the teacher in the development of the child care management program of the child care facility. I want to use as.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.2
• /
• pp.149-157
• /
• 2009

Purpose: This study was to evaluate the validity of superimposition range at facial images constructed with 3-dimensional (3D) surface laser scanning system. Materials and methods: For the present study, thirty adults, who had no severe skeletal discrepancy, were selected and scanned twice by a 3D laser scanner (VIVID 910, Minolta, Tokyo, Japan) with 12 markers placed on the face. Then, two 3D facial images (T1-baseline, T2-30 minutes later) were reconstructed respectably and superimposed in several manners with $RapidForm^{TM}2006$ (Inus, Seoul, Korea) software program. The distances between markers at the same place of face were measured in superimposed 3D facial images and measurement were done all the 12 makers respectably. Results: The average linear distances between the markers at the same place in the superimposed image constructed by upper 2/3 of the face was $0.92{\pm}0.23\;mm$, in the superimposed image constructed by upper 1/2 of the face was $0.98{\pm}0.26\;mm$, in the superimposed image constructed by upper 1/3 of the face and nose area was $0.99{\pm}0.24\;mm$, in the superimposed image constructed by upper 1/3 of the face was $1.41{\pm}0.48\;mm$, and in the superimposed image constructed by whole face was $0.83{\pm}0.13\;mm$. There were no statistically significant differences in the liner distances of the makers placed on the area included in superimposition range used for partial registration methods but there were significant differences in the linear distances of the markers placed on the areas not included in superimposition range between whole registration method and partial registration methods used in this study. Conclusion: The results of the present study suggest that the validity of superimposition is decreased as superimposition range is reduced in the superimposition of 3D images constructed with 3D laser scanner for the same subject.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.252-264
• /
• 2008

Objective: To aid the development of a frontal image simulating program, we evaluated the soft tissue frontal changes in relationship to movement of hard tissue with orthognathic surgery of facial asymmetry patients. Methods: Preoperative and postoperative frontal cephalograms and frontal view photographs of 45 mandibular surgery patients with facial asymmetry were obtained in a standardized manner. Vertical and horizontal changes of hard tissue and soft tissue were measured from cephalograms and photographs, respectively. Soft tissue change in result to hard tissue change was then analyzed. Results: Both vertical and horizontal correlation analysis showed a weak relationship between the changes. Hard tissue points that were picked for 1 : 1 mean ratio with soft tissue points did not show any significant relevance. For each soft tissue change, regressive equation was formulated by stepwise multiple regression analysis, and the equation for soft tissue Menton was most reliable in predicting changes. Both vertical and horizontal hard tissue changes were used together in prediction of vertical or horizontal soft tissue change. Conclusions: The results suggest that computerized image simulation using regression analysis may be of help for prediction of soft tissue change, while 1:1 mean ratio method is not useful.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.6
• /
• pp.461-467
• /
• 2005

Background. 5-(and-6)-carboxy-2',7'-dichlorofluorescein diacetate, succinimidyl ester mixed (CFSE) is the fluorescent labelling agent of living cells and used to trace the cells in vivo after transplatnation of various cells. The CFSE labelled cells can maintain fluorescence for up to 7 days after labelling. The MC3T3-E1 cell line (MC3T3) has been used for many studies about osteoblast, which is well known as a mouse preosteoblast. So the CFSE would be used to trace the transplanted MC3T3. However there are few reports about CFSE labelling of MC3T3. This study is aimed to know about adequate concenturation and incubation time of CFSE to MC3T3. Materials and methods. The MC3T3 was incubated in a humidified atmosphere of 95% air with 5% $CO_2$ at $37^{\circ}C$ using ${\alpha}$-minimal essential medium (${alpha}$-MEM) containing10% FBS and gentamycin. Ten mM CFSE solution in dimethylsulphoxide (DMSO: 1%) was diluted with phosphate buffered saline (PBS) and final concentration of culture medium was, respectively, 5, 10, 15, 20, 25 and 30 ${{\mu}M$. Then the MC3T3 was incubated with CFSE in a humidified atmosphere of 95% air with 5% $CO_2$ at $37^{\circ}C$ for 5, 10, 15, 20, 25, 30, 35, 40 and 45 minutes in each concentration. The fluorescence of CFSE labelled cells was analysed with a inverted fluorescence microscope. The duration of cell labelling was also studied. Trypan blue dye exclusion test was done for cell viability. Results. For concentration between 5 and 10 ${\mu}M$, CFSE did not significantly label the MC3T3 in vitro. The destruction of MC3T3 was observed at the concentration of 20 ${\mu}M$. In the concentration of 15 ${\mu}M$, the best labelling was obtained at an incubation period between 15 and 30 minutes. The MC3T3 labelled with an incubation period of 15 minutes at 15 ${\mu}M$ was still fluorescent 7 days after CFSE labelling. The mean cell viability was 95.93%. Conclusion. These results suggests an incubation period of 15 minutes at 15 ${\mu}M$ of CFSE provides best labelling of MC3T3 in vitro.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.339-347
• /
• 2013

Recently, Korean medium-sized medical organizations require innovative strategies. Network-driven concerns in Korean medical organization have been a front burner issue to enhance economic and managerial efficiencies. Effective network-driven collaboration depends upon effective processes and economics strategies among medical providers group. From this motivation, we studied and provided the systems' theoretical background and networked hospital system structures. The aim of suggested research model in this paper is to overcome demerit of stand-alone medium-sized hospitals and analyze a system dynamics model to measure managerial performances. The developed system dynamics model is to quantify the effects of network strategy based on the historical financial data of real-life hospitals network experiences. The network effects are resulted in efficiencies and effectiveness enhancements in competitiveness through advertisement and effective education system. The simulations of system dynamics results can explain the improvement in financial outcome by joining in the network group. The network effects are shown more effective in dental hospital than other groups. In conclusion, it is expected that network effects have a critical influence of managerial, marketing, and medical collaboration performance for any type of medical hospitals.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.200-211
• /
• 1999

For many years permanent soft denture liners has been widely used in dental practice directly or indirectly because of its function in absorbing and distributing the impact force. However, it reveals problems such as lack of permanency and decreased bond strength in long term use. The purpose of this study is to measure the bond strength and failure between denture base resin and several permanent liners. Lucitone 199 was used as denture base resin with soft acrylic liners (Triad, Tokuso Rebase) and silicone elastomers (Tokuyama, Ufi Gel C) bonded to measure the tensile strength before and after thermocycling. The thermocycling was done in 2000 cycles at $5^{\circ}C,\;26^{\circ}C\;and\;55^{\circ}C$ and the measured tensile strength values before and after thermocycling were compared. The mode of failure was investigated in the separated specimens. The results are as follows. 1. As to tensile strength, the strongest material is Tokuso Rebase followed by Triad, Tokuyama, Ufi Gel C in before thermocycling and the order of Triad, Tokuso Rebase, Tokuyama, Ufi Gel C in after thermocycling state. There was significant difference between the values of Triad, Tokuso Rebase and Tokuyama, Ufi Gel C(p<0.05). 2. As to degree of displacement, Ufi Gel C showed most displacement with or without thermo-cycling treatment and also the difference was significant with the other materials(p<0.05). 3. As to comparisons before and after thermocycling, Tokuso Rebase and Tokuyama showed significant difference in bond strength, whereas Triad and Tokuso Rebase showed significant difference in the degree of displacement(p<0.05). 4. In debonded specimens, Triad and Ufi Gel C showed adhesion failure and Tokuyama showed cohesion failure. Both failures were observed in Tokuso Rebase with adhesion failure up to 70%. The results of this study showed that degree of bond strength between permanent soft denture liner and denture base resin were variable. There was a significant difference between soft acrylics and silicone elastomers with regard to bond strength. Further research in improving bond strength of widely used silicone elastomers and in developing the method of measuring bond strength between denture base resin and the lining materials is needed.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.437-448
• /
• 2005

This study is an analysis of distribution of patients who installed Xive implant in Yonsei University Hospital and types of implant site for about 2 years recall check and cumulative survival rate. 41 implant were used in this study. It shows the conclusion below. 1. Patients at the age of 40s and 50s were 60% of all implant cases and average number of implant was 2.4(man), and 1.9(woman). All cases were operated on mandible, 3 implants on anterior region and 38 implants on posterior region. 2. The major cause of tooth loss is dental caries(48.8%), followed by periodontal disease. 3. Most distribution of bone qaulity for mandibular implant site was type II(65.8%) and bone quantity was type B(75.6%). 4. The majority of implants were those of 11, 13mm in length(95%) and regular diameter in width (64%). 5. The 41(19 persons) Xive implants that were placed in the mandibular anterior and posterior region were all survival and showed a 100% 2 year cumulative survival rate. The results provided us with basic data on patient type, implant distribution, bone condition, and survival rate. We wish that our results coupled with other research data helps assist in the further study for better implant success rates, etc.

• Journal of Periodontal and Implant Science
• /
• v.35 no.3
• /
• pp.761-776
• /
• 2005

The purpose of the present study was to examine the relationship between the form of the clinical crowns in the maxillary anterior segment and the clinical feature of gingiva such as morphological characteristics and the gingival thickness. Fifty periodontally healthy subjects were clinically examined regarding the probing depth, the thickness of the free gingiva, and the width of the keratinized gingiva. From study models of the maxillary anterior region, the width at cervical third(CW) and the length(CL) of the clinical crown, the papillary height, and the gingival angle of the 6 anterior teeth were measured. Each tooth was classified into 4 groups (longnarrow, NL; narrow, N; wide, W; short-wide, WS) according to CW/CL ratio and all the data were compared between groups NL and WS using independent t-test. Stepwise multiple regression analysis was performed for each tooth region with the gingival thickness at the level of sulcus bottom, the width of keratinized gingiva, and gingival angle as the dependent variables. As the results, the NL group of the upper anterior teeth displayed, higher papilla height, and narrower keratinized gingiva, more acute gingival angle resulting in pronounced "scalloped" contour of the gingival margin, compared to the WS group. There was no significant difference between groups NL and WS with respect to probing depth and the gingival thickness. The regression analyses demonstrated that the gingival thickness in central incisors was significantly associated to the mesio-distal width and bucco-lingual width of the crown, and labial probing depth. The width of keratinized gingiva was significantly associated with labial probing depth in central incisors and with proximal probing depth and gingival angle in lateral incisors, and with labial and proximal probing depth, and gingival angle in canines. The gingival angle was significantly associated with papillary height and CW/CL ratio and additionally with proximal probing depth in central incisors, with the width of keratinized gingiva in lateral incisors, and with labial probing depth and the width of keratinized gingiva in canines. These results indicate that the form of clinical crown in upper anterior region could influence the clinical feature of gingiva and the influencing factors might be different according to the tooth region.