• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권1호
• /
• pp.20-30
• /
• 2016

Objectives: To validate a critical-size mandibular bone defect model in miniature pigs. Materials and Methods: Bilateral notch defects were produced in the mandible of dentally mature miniature pigs. The right mandibular defect remained untreated while the left defect received an autograft. Bone healing was evaluated by computed tomography (CT) at 4 and 16 weeks, and by micro-CT and non-decalcified histology at 16 weeks. Results: In both the untreated and autograft treated groups, mineralized tissue volume was reduced significantly at 4 weeks post-surgery, but was comparable to the pre-surgery levels after 16 weeks. After 16 weeks, CT analysis indicated that significantly greater bone was regenerated in the autograft treated defect than in the untreated defect (P=0.013). Regardless of the treatment, the cortical bone was superior to the defect remodeled over 16 weeks to compensate for the notch defect. Conclusion: The presence of considerable bone healing in both treated and untreated groups suggests that this model is inadequate as a critical-size defect. Despite healing and adaptation, the original bone geometry and quality of the pre-injured mandible was not obtained. On the other hand, this model is justified for evaluating accelerated healing and mitigating the bone remodeling response, which are both important considerations for dental implant restorations.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제48권5호
• /
• pp.297-302
• /
• 2022

Objectives: This retrospective study aimed to analyze data on nerve damage in patients who complained of sensory changes after dental implant surgery, the clinical results according to proximity of the implant fixture to the inferior alveolar nerve (IAN) canal, and the factors affecting recovery of sensation. Materials and Methods: The electronic medical records of 64 patients who had experienced sensory change after implant surgery were reviewed. Patients were classified by sex, age, implant installation sites, recovery rate and the distance between the implant fixture and IAN canal on computed tomography (CT). The distance was classified into Group I (D>2 mm), Group II (2 mm≥D>0 mm), and Group III (D≤0 mm). Results: The 64 patients were included and the mean age was 57.3±7.3 years. Among the 36 patients who visited our clinic more than two times, 21 patients (58.3%) reported improvement in sensation, 13 patients (36.1%) had no change in sensation, and 2 patients (5.6%) reported worsening sensation. In Group II, symptom improvement was achieved in all patients regardless of the removal of the implant fixture. In Group III, 8 patients (40.0%) had reported symptom improvement with removal of the implant fixture, and 2 patients (33.3%) of recovered patients showed improvement without removal. Removal of the implant fixture in Group III did not result in any significant difference in recovery (P=0.337), although there was a higher possibility of improvement in sensation in removal cases. Conclusion: Clinicians first should consider removing the fixture when it directly invades the IAN canal. However, in cases of sensory change after dental implant surgery where the drill or implant fixture did not invade the IAN canal, other indirect factors such as flap elevation and damage due to anesthesia should be considered as causes of sensory change. Removal of the implant should be considered with caution in these situations.

• Imaging Science in Dentistry
• /
• 제32권1호
• /
• pp.35-39
• /
• 2002

Purpose: The altered gantry angle during scanning for some multiplanar reconstruction CT program (CT/MPR) may cause distortion of the image. The aim of this study was to ascertain whether there is a image distortion in a reformatted image when the gantry and the object are equally inclined using ToothPix and DentaScan program. Materials and Methods: A resin block model with four cylindrical holes and a human dry mandible were used. Two MPR software packages, ToothPix and DentaScan program, were used for reformatted panoramic images. The block and the gantry were equally inclined at 0°, 15°, and 30°. Results: With ToothPix program, a resin block model with empty holes and a dry mandible showed inclined images in the reformatted panoramic image. Increasing the gantry angle, the depth and inclination of the holes were increased in the reformatted central panoramic images. However, a resin block model with gutta perch a in its holes and a dry mandible with a wire in its mandibular canal didn't show image distortion. With DentaScan program, image distortion was not seen in any situation. Conclusion: ToothPix program may distort the reformatted image when the gantry angle is not at zero degrees. However, with DentaScan program, the patient may be positioned comfortably and the gantry can be adjusted to the patient positioning.

• 구강회복응용과학지
• /
• 제33권4호
• /
• pp.278-283
• /
• 2017

목적: 본 연구 목적은 이상적인 임플란트 근원심적 식립 위치 결정에 필요한 정보를 제공하기 위해서 콘빔형 전산화단층영상(cone-beam CT)을 사용하여 건강한 자연치열에서 백악-법랑 경계부와 치조골 흡수를 가정한 그 하방 2 mm에서 전치, 소구치, 대구치의 치간거리를 평가하는 것이다. 연구 재료 및 방법: 원광대학교 치과대학병원에서 cone-beam CT를 촬영한 건강한 치열의 200명 환자를 선정하였다. Cone-beam CT 이미지를 DICOM (digital imaging and communication in medicine) 파일로 전환하여, 3차원 영상으로 재구성하였고, cone-beam CT 이미지를 표준화하기 위하여 head reorientation을 시행한 후, 전용 소프트웨어를 이용해 재구성된 파노라마 이미지를 얻었다. 모든 계측은 3명의 치과의사에 의해 최적화된 파노라마 이미지 상에서 시행되었다. 결과: 백악-법랑 경계부에서 상악 평균 치간거리는 전치 1.84 mm, 소구치 2.07 mm, 대구치 2.08 mm 그리고 하악은 전치 1.55 mm, 소구치 2.20 mm, 대구치 2.36 mm였다. 백악-법랑 경계부 하방 2 mm에서 상악 평균 치간거리는 전치 2.19 mm, 소구치 2.51 mm, 대구치 2.60 mm 그리고 하악은 전치 1.86 mm, 소구치 2.53 mm, 대구치 3.01 mm였다. 결론: 자연치열에서 치간거리는 전치부보다는 구치부에서 더 컸으며, 백악-법랑 경계부보다 그 하방 2 mm에서 더 크게 나타났다. 전 치열에서 가장 좁은 곳은 하악 전치, 가장 넓은 곳은 하악 대구치였다.

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.133-138
• /
• 2007

Purpose: The purpose of this study was to evaluate the morphologic features of posterior edentulous mandible for Korean patients using cross-sectional CT images. Materials and Methods: Computed tomographic cross-sectional views taken in 2004 and 2005 at Seoul National University Dental Hospital were analyzed by an oral and maxillofacial radiologist. Four indices were measured to meet the purpose of this study: 1) the horizontal distance between the alveolar crest and mandibular canal (Type), 2) the angle of the mandibular long axis (Angle), 3) the bucco-lingual location of mandibular canal, and 4) the depth of the submandibular fossa. The averages and standard deviations of the measurements were compared according to the location (the first and second molar area) and sex of the patients. Results: Statistically significant difference was found in Type, Angle, and submandibular fossa depth between the first and second molar area (p<0.05). However, there was no significant difference between men and women in any of the measured indices. Most of the mandibular canals were located in lingual side of posterior mandible. Conclusion: More care should be taken when an implant is installed on the mandibular second molar area.

• Imaging Science in Dentistry
• /
• 제32권2호
• /
• pp.61-66
• /
• 2002

Purpose: To compare the bone height of implant sites measured using panoramic radiography and spiral CT. Materials and Methods : The available bone height was determined for 263 maxillary and mandibular implant sites in 59 patients. Distortion was calculated using the metal bar for the panoramic radiographs. Results: Significant differences in mean bone height between the two imaging modalities were found in maxillary and mandibular anterior regions (p<0.05). The mean difference in bone height recorded by the two techniques was smallest in the maxillary and mandibular molar areas (0.8 mm), and greatest in the mandibular anterior region (1.3 mm). With the exception of the mandibular anterior region, ninety percent of all the sites showed measurement differences within 2 mm. Conclusion: A safety margin of 2 to 3 mm is called for when utilizing panoramic radiography, otherwise additional imaging modality such as computed tomography is necessary to obtain accurate measurements.

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.171-180
• /
• 2007

The role of radiographic imaging in determining the size, numbers and the position of implants is very important. To perform the implant procedure, the dentist needs to evaluate the bone pathology and bone density, and to know the precise height, width, and contour of the alveolar process, as well as its relationship to the maxillary sinus and mandibular canal. The author analyzed 3 implant cases for treatment planning with the cone beam CT. All axial, panoramic, serial and buccolingual-sectioned images of 3 cases with stent including vertical marker were taken by using Mercuray (Hitachi, Japan). When the curved line drawn intentionally did not include dot image of a vertical marker on the axial image of CBCT, the image of the vertical marker was deformed on its buccolingually sectioned image. There was wide discrepancy in inclination between the alveolar bone and tooth on buccolingually sectioned image.

• 대한심미치과학회지
• /
• 제25권1호
• /
• pp.35-49
• /
• 2016

최근 심미성에 대한 요구가 점점 증가함에 따라, 이제는 임플란트 수복에 있어서도 기능적인 면 뿐만 아니라 심미적인 면이 더욱 강조되고 있다. 상악 전치부 임플란트 수복은 임상가들에게 항상 도전적인 과제로 다가오는데 그 이유는 다음의 세 가지 요소를 모두 필요로 하기 때문이다. 첫째, 충분한 경조직이 필요하고 둘째, 충분한 연조직이 필요하며 그리고 셋째, 심미적인 수복물이 필요하다. 연조직의 심미성은 그 하부에 있는 경조직에 의존하게 되는데 그 이유는 하부의 경조직의 골격적인 지지가 있어야만 그것을 바탕으로 그 위에 건강하고 심미적인 연조직이 안정적으로 유지될 수 있기 때문이다. 그러므로, 경조직 재건은 심미적인 임플란트 수복에 있어서 첫번째 단계이며, 특히 3차원적으로 적절한 임플란트의 식립 위치 설정은 심미성 있는 최종 수복물을 얻기 위해서 가장 중요한 단계라고 할 수 있다. 그 다음으로 두번째 단계가 순측으로 충분한 두께의 연조직을 얻기 위한 수술 기법이며, 마지막 세번쨰 단계가 적절한 출현외곽을 갖는 임시 수복물을 통해서 얻어진 심미적인 최종 수복물이다. 본 임상 증례 보고는 순측의 골 열개 결손에서의 골 증대술 과정과 전치부 영역에 주로 사용되는 VIP-CT 라고 일컫는 유경 판막술을 이용한 연조직 증대술, 그리고 임시 수복물을 통한 연조직 형태 만들기와 맞춤형 인상 코핑을 이용한 인상채득법 등을 소개함으로써 경조직, 연조직, 수복물의 세 가지 요소가 심미적인 최종 수복물을 위해 서로 어떻게 조화를 이루어내는지 알아보고자 한다.

• Journal of Periodontal and Implant Science
• /
• 제44권2호
• /
• pp.94-99
• /
• 2014

Purpose: Various surgical techniques target achieving adequate keratinized tissue around dental implants; however, these techniques are usually performed before implant placement or upon the exposure of submerged implants. The aim of this case report is to describe a simultaneous placement of an interpositional free gingival graft (iFGG) with that of nonsubmerged implants in a patient lacking keratinized tissue and to assess the longterm outcome of this grafted gingiva. Methods: A wedge-shaped free gingnival graft (FGG), including an epithelium-connective tissue (E-C) portion and a connective-tissue-only (CT) portion, was harvested from the palate. The CT portion was inserted under the buccal flap, and the E-C portion was secured tightly around the implants and to the lingual flap. Results: At the 8-year follow-up, the gingival graft remained firmly attached and was well maintained, with no conspicuous shrinkage or reported discomfort during oral hygiene procedures. The use of an iFGG at a nonsubmerged implant placement minimizes the required number of surgical steps and patient discomfort while providing adequate buccal keratinized tissue. Conclusions: Therefore, the technique could be considered an alternative method in increasing the keratinized tissue for cases that have a minimal amount of keratinized tissue.

• 구강회복응용과학지
• /
• 제34권1호
• /
• pp.46-55
• /
• 2018

치조골의 흡수와 치주조직의 염증을 동반한 심한 치주질환 환자에서 임플란트를 통한 구강 회복은 임상적으로 어려움이 있다. 하지만 골 형태에 따른 적절한 임플란트 식립 위치를 선정한다면 불필요한 골 이식이나 연조직 수술을 최소로 할 수 있다. 최근에는 cone beam CT 촬영과 소프트웨어를 이용하여 환자의 해부학적 형태와 보철적인 위치를 고려하여 임플란트 식립 위치를 선정할 수 있게 되었고 3D printing 기술을 통해 제작된 surgical guide를 통해 계획된 위치로 정확한 수술이 가능하게 되었다. 본 증례는 70세 여성 환자로 심한 치주질환으로 인해 전악 치아의 발치가 필요하였으며 임플란트 지지 고정성 보철물로 전악 구강회복을 시행하였다. 수술 시에는 보철적인 위치를 고려한 surgical guide를 이용해 flapless 방식으로 임플란트를 식립하였고 수술 전에 CAD/CAM 방식으로 제작된 임시보철물을 즉시 부하하였다. 이후 맞춤형 지대주와 지르코니아를 이용한 보철물을 제작하였으며, 만족스러운 심미 및 기능 회복을 보였기에 보고하는 바이다.