• Journal of Korean society of Dental Hygiene
• /
• v.17 no.3
• /
• pp.479-492
• /
• 2017

Objectives: The purpose of this study is to understand the practices of the dental implant maintenance care according to knowledge and attitude toward dental implant in the dental service consumers. Methods: T-test, ANOVA, and cross tabulation were carried out to understand the knowledge and attitude toward the dental implant, the experiences of the treatments, and the practices of their maintenance care depending on the general characteristics and the oral-health education experience. The collected data were analyzed using by SPSS Windows Program 23.0. Results: The actual state of the implant maintenance care was revealed to be high in the use of oral care products with 83.9% and in the professional maintenance care with 86.0%. In terms of the implant-related experiences, the participation and the participation frequency in the professional maintenance care were resulted to be higher especially in those with more cases of surgical procedures and in those with more failure experiences. Examining the practices of management according to knowledge and attitude toward dental implant, the higher in knowledge and attitude led to the higher uses of oral care products. The periodically professional maintenance care was indicated to be received even if being taken high management cost. Conclusions: Effective education methods and programs are necessary to be developed and executed so that information and knowledge can lead the correct practices in the dental service consumers.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.4
• /
• pp.190-197
• /
• 2006

The effects of blasting and acidic treatment on the corrosion characteristics of dental implant fabricated with Cp-Ti and Ti-6Al-4V alloy have been researched by using electrochemical methods. The fabricated implants were cleaned and sandblasted by $Al_2O_3$ powder and then acidic treatment was carried out in nitric acid solution. The surface morphology were observed using scanning electron microscope. The corrosion behaviors were investigated using potentiosat and EIS in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The potentio-dynamic test in 0.9% NaCl indicated that the corrosion potential of blasting and acidic treated implant was lower than that of non treated implant, but current density was higher than that of non treated implant. From the cyclic potentiodynamic test results of Ti implant, the passivation current density of blasting and acidic treated implant slightly higher than that of non treated implant. From A.C. impedance test results in 0.9% NaCl solution, polarization resistance($R_p$) value of blasting and acidic treated implant was lower than that of non treated implant. In case of blasting and acidic treated implant surface, the pits were observed in valley and crest of implant surface.

• Journal of Korean society of Dental Hygiene
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2024

Objectives: The demand for dental care is expected to increase as the population ages. This study aimed to predict the utilization of dental implant care following the expansion of national health insurance benefits for dental implants. Methods: Multiple linear regression analysis was performed on HIRA big data open portal data and DNN-based artificial intelligence models to forecast the utilization of dental care in relation to the national health insurance coverage for dental implants. Results: National health insurance coverage of dental implants was found to be associated with the number of patients using dental implant services and demonstrated a statistical significance. The dental implant services utilization increased with the increased dental implant health insurance benefits for the elderly population, increased mean by region, increased number of dental institutions by region, and increased health insurance coverage rate for dental implants. However, the dental implant services utilization decreased with the increased number of older people living alone and increased size of dental institutions. Conclusions: With the expansion of the national health insurance coverage for dental implants, it is predicted that the utilization of dental implant medical services will increase in the future.

• Journal of Periodontal and Implant Science
• /
• v.49 no.6
• /
• pp.397-405
• /
• 2019

Purpose: This study examined the prevalence and risk factors of peri-implant disease after at least 7 years of dental implant loading. Methods: A total of 111 patients with 218 dental implants were treated. The follow-up period for all implants was at least 7 years. The patients' dental records were collected and risk factors of peri-implant disease were investigated through logistic regression analysis. Results: The overall implant survival rate was 95.87%, because 9 of the 218 implants failed. The prevalence of peri-implant mucositis and peri-implantitis was 39.7% and 16.7%, respectively. As risk factors, smoking and prosthetic splinting showed significant associations with peri-implantitis (P<0.05). Conclusions: Within the limits of this study, no significant correlations were found between any risk factors and peri-implant mucositis, but a significantly elevated risk of peri-implantitis was observed in patients who smoked or had splinted prostheses in 2 or more implants.

• Journal of Technologic Dentistry
• /
• v.38 no.1
• /
• pp.9-22
• /
• 2016

Purpose: The Purpose of this study are to describe the Dental field of present health insurance for custom-made prosthetic implant by dental technicians' work. Results: A total of 300 dental technicians working at dental laboratories in Korea were randomly selected and surveyed, 206(68.7%) of them were used for the statistical analysis. Conclusion: Average daily working time was 10 hours 66%. The average cumulative credit of the clinic for dental prosthesis fabrication rates was Less than 10 million won(21.8%), 10~80 million won(11.7%), more than one hundred million won(1.5%). Remake dental prosthesis was one more than the monthly average of 98.5%. Causes of remake dental prosthesis was dentist impression 83% but did not pay 62.5%. Dental technicians Implant production period was 7 days(48.5%), 10 days(35%) was commissioned by dentists production time is 5 days(46.1%), 7 days(36.5%). President of dental laboratories 3.86 points and dental technicians 3.06 points knew differently about starting of implant health insurance coverage(p<.001). They alike were in favor of insurance coverage for the implant. Dental technicians were lower by 2.36 points for work do you know whether your health insurance application of dental prostheses. Dental technicians are 2.16 points on whether confidence in the pores payment of insurance coverage dental prosthesis, dental laboratory president was lower by 1.85 points. They are very low with 1.97 points on whether confidence in the rate payment of health insurance coverage dental prosthesis(p<.01). The implant prosthesis abutment selected, the abutments designed, design of the implant upper prosthetic, the upper prosthetic fitting dental technicians participate of dental laboratory president showed higher score (p <.05). Conclusion: Hours of dental technicians were making this short period of remake dental prosthesis-related dental prosthesis. Dental clinic and a detailed representation of the dental prosthodontic fabrication request is required for communication between the laboratory in order to reduce the remake of a dental prosthesis, dental insurance coverage written dental prosthodontic fabrication request should be legislated. Implant classification standard medical practice 1-3 Step conduct a thorough costing a total of no. 73 of the correct classification standard medical practice in addition to eight times defined by the act of dental technicians should be defined.

• Imaging Science in Dentistry
• /
• v.41 no.2
• /
• pp.59-62
• /
• 2011

Purpose : This study was performed to evaluate the changes of jaw bone density around the dental implant after placement using computed tomography scan (CT-Scan). Materials and Methods : This retrospective study consisted of 30 patients who had lost 1 posterior tooth in maxilla or mandible and installed dental implant. The patients took CT-Scan before and after implant placement. Hounsfield Unit (HU) was measured around the implants and evaluated the difference of HU before and after implant installation. Results : The mean HU of jaw bone was 542.436 HU and 764.9 HU before and after implant placement, respectively (p<0.05). The means HUs for male were 632.3 HU and 932.2 HU and those for female 478.2 HU and 645.5 HU before and after implant placement, respectively (p<0.05). Also, the jaw bone with lower density needed longer period for implant procedure and the increased change of HU of jaw bone was less in the cases which needed longer period for osseointegration. Conclusion : CT-Scan could be used to assess the change of bone density around dental implants. Bone density around dental implant was increased after placement. The increased rate of bone density could be determined by the quality of jaw bone before implant placement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.433-438
• /
• 2012

This paper is the second paper among two papers which constitute the paper about the structural design of a dental implant. This paper completed the test drafting for the structural model of the new dental implant whose structural performance was confirmed and verified through the comparative structural analysis carried out in the first paper. This paper finished the structural design of a dental implant by manufacturing the dental implant using CNC machines and so forth on the basis of the completed draft and finally by evaluating the machining condition of the dental implant. The drafting work was performed using MDT(Mechanical Desk Top). The manufacturing work was carried out using CNC machines, general purpose milling machine, and Wire EDM. The manufactured surface condition of the dental implant was evaluated and confirmed finally using an electron microscope. As a result of evaluation, a testing dental implant with very good condition was designed and manufactured.

• Journal of Periodontal and Implant Science
• /
• v.49 no.3
• /
• pp.185-192
• /
• 2019

Purpose: Implant wall thickness and the height of the implant-abutment interface are known as factors that affect the distribution of stress on the marginal bone around the implant. The goal of this study was to evaluate the long-term effects of supracrestal implant placement and implant wall thickness on maintenance of the marginal bone level. Methods: In this retrospective study, 101 patients with a single implant were divided into the following 4 groups according to the thickness of the implant wall and the initial implant placement level immediately after surgery: 0.75 mm wall thickness, epicrestal position; 0.95 mm wall thickness, epicrestal position; 0.75 mm wall thickness, supracrestal position; 0.95 mm wall thickness, supracrestal position. The marginal bone level change was assessed 1 day after implant placement, immediately after functional loading, and 1 to 5 years after prosthesis delivery. To compare the marginal bone level change, repeated-measures analysis of variance was used to evaluate the statistical significance of differences within groups and between groups over time. Pearson correlation coefficients were also calculated to analyze the correlation between implant placement level and bone loss. Results: Statistically significant differences in bone loss among the 4 groups (P<0.01) and within each group over time (P<0.01) were observed. There was no significant difference between the groups with a wall thickness of 0.75 mm and 0.95 mm. In a multiple comparison, the groups with a supracrestal placement level showed greater bone loss than the epicrestal placement groups. In addition, a significant correlation between implant placement level and marginal bone loss was observed. Conclusions: The degree of bone resorption was significantly higher for implants with a supracrestal placement compared to those with an epicrestal placement.

• The Journal of the Korean dental association
• /
• v.54 no.6
• /
• pp.457-467
• /
• 2016

The National Health Insurance Service(NHIS) has been selectively covering the elderly on the dental implant and removable denture treatment and gradually expanding the eligibility criteria. Every dentist needs to have a good understanding of the insurance policy to provide qualified dental service to the beneficiaries and to avoid confusions and complications. In order to help dentists understand the NHIS requirements, the definitions, categories, and procedures of dental implant and conventional denture treatment are suggested.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.3
• /
• pp.371-379
• /
• 2014

Objectives : The purpose of this study is to investigate the correlation between quality of sleep and dental fear in implant surgery patients. Methods : A self-reported questionnaire was filled out by 153 implant patients from December 2012 to February 2013 in dental clinics and hospitals in Busan and Changwon. Data were analyzed by descriptive analysis, t-test, ANOVA and multiple regression analysis using SAS version 9.20. Results : The quality of sleep in the implant patients was $41.0{\pm}6.0$. The systemic diseases influenced on the quality of sleep and dental fear also affected the quality of sleep. Conclusions : The results of the analysis of a relationship between the fear perception of dental implant surgery patients and the quality of their sleep showed that the patients with systemic diseases, the patients with a fear by the physical stimulation relating to implant treatment showed the low quality of sleep.