• 대한치과보철학회지
• /
• 제33권2호
• /
• pp.335-353
• /
• 1995

The purpose of this study was to the determine the optimal torques values to tighten the retaining screw. 3-different implant system tested were as follows : Branemark implant system$(3.75mmD{\times}100mm)$, Steri-Oss implant system$(3.8mmD{\times}10mm)$. One fixtures of each implant system was mounted into the epoxy resin block and abutment/superstructure complex was constructed. Eighty dental college students(male : 40, female : 40) of Chosun University were selected and were asked to tighten the retaining screws. Abutment/superstructure complex of each implant system was tightened to the maximum torque by use of hand-held screw driver, and then torque value was measured with torque value was measured with torque driver(Tohnichi torque driver, model 20 FTD, Tohnichi MFG, Co., LTD., Tokyo, Japan). Abutment/superstructure complex of each implant system was titghtened to each torque of 10 N-cm, 20 N-cm and 30 N-cm, and then the dynamic load(vertical & diagonal load) was applied to the abutment / superstructure complex. The gap between abutment/superstrure in each implant system was measured with 3-dimensional measuring microscope(model No. 850, Germany). The results were as follow : 1. Torque values according to the individual subjects showed wide range. 2. Torque values according to sex showed statistical significant difference. Those are as follows : in case of male, $9.38{\pm}2.93$ N-cm ; incase of female, $7.80{\pm}2.25$ N-cm. 3. Torque values according t implant systems showed statistical significant difference. Those are as follows : in ase of Branemark implant system, $6.54{\pm}1.54$ N-cm : in ase of Steri-Oss implant system, $10.1{\pm}2.88$ N-cm ; in case of IMZ implant system, $9.18{\pm}2.17$ N-cm. 4. The more torque value of tightening screw was increased, the less the gap was after the vertical and diagonal loading. 5. The gap after the diagonal loading was greater than that after the vertical loading. 6. The magnitude of gap between abutment/superstructure in order of IMZ, Steri-Oss, Branemark implant system after the verical and diagonal loading. 7. The gap under the diagonal loading after applying 30 N-cm torque showed no statistical significant difference in cases of the Branemark system and the Steri-Oss implant system but it showed significant different in case of the IMZ implant system.

• 대한치과보철학회지
• /
• 제31권1호
• /
• pp.63-76
• /
• 1993

The purpose of this study was to investigate the disclusion time and occlusal pattern during lateral movement in normal group and temporomandibular dysfunction (TMD) group. Twenty dental college students of Chosun University without the abnormal occlusion and temporomandibular dysfunction were selected as a normal group, and twenty slight temporomandibular dysfunction (TMD) group and the ten moderate temporomandibular dysfunction (TMD) group classified according to Helkimo's dysfunction index were selected. Occlusal pattern was classified as canine guided occlusion, group functioned occlusion and the other group during lateral movement and disclusion time in lateral movement was measured using T-Scan system. The result were as follows: 1. The disclusion time according to each group were $1.24{\pm}0.58$ sec in normal $1.60{\pm}0.79$ sec in slight TMD group and $2.29{\pm}0.80$ sec in moderate TMD group. There was statistically significant between normal group and moderate TMD group(P<0.01), slight TMD group and moderate TMD group(P<0.05). 2. The distribution of occlusal pattern in normal group was 62.5% (25 side) in canine guided occlusion, 27.5% (15 side) in group functioned occlusion. 3. The distribution of occlusal pattern in slight TMD group was 45% (18side) in canine guided occlusion, 35% (14 side) in group functioned occlusion and 20% (8side) in others and that in moderate TMD group was 15% (3 side) in canine guided occlusion, 35% (7 side) in group funcconed occlusion and 50% (10 side) in other 4. The disclusion time in normal group was $1.05{\pm}0.59$ sec at canine guided occlusion and $1.53{\pm}0.72$ sec at group functioned occlusion. 5. The disclusion time in slight TMD group was $1.23{\pm}0.75$ sec in canine guided occlusion, $1.50{\pm}0.88$ sec in group functioned occlusion, and $2.61{\pm}0.57$ sec, in the other. There was staistically significant between canine guided occlusion and other(P<0.001)and group functioned occlusion and the other (P<0.05). 6. The disclusion time in moderate TMD group was $1.28{\pm}0.84$ sec in canine guided occlusion, $1.75{\pm}0.58$ sec in group functioned occlusion, and $2.98{\pm}0.08$ sec in the other(P<0.01).

• 대한치과교정학회지
• /
• 제33권6호
• /
• pp.437-451
• /
• 2003

본 연구의 목적은 최대 교합력을 측정하여 전후방적, 수직적 및 횡적인 안면 골격 요소들과의 관련성을 연구하는 것이다. 연구 대상으로 남녀 대학생들을 각각 26명과 14명씩 총 40명을 선택하였다. 본 연구를 위하여 개발된 strain gauge를 이용한 장치로 좌우 제1대구치와 전치부에서 최대 교합력을 측정하였다. 두부방사선 사진을 촬영하여 여러 계측 항목들을 측정하고, 통계분석을 시행하여 다음의 결과를 얻었다. 1. 제 1대구치 최대 교합력은 남자는 $68.0\pm13.9kg$, 여자는 $55.6\pm10.5kg$ 이었고 (p<0.05), 전치에서 남자는 $8.4\pm4.9kg$, 여자는 $5.1\pm3.4kg$이었다(p<0.05). 2. 저작을 선호하는 쪽의 교합력이 더 크게 나타나는 경향을 보였지만 통계적으로 유의한 차이는 없었다(P>0.05). 3. 최대교합력이 강한 군과 약한군 간에 여러 항목들에서 유의한 차이를 나타내었는데, 제1대구치 최대 교합력에 대해서는 N-S-Ar, S-Ar-Go, FH-H1, IMPA 그리고 MMO 항목들이 유의한 차이를 보였고, 전치부 최대 교합력에 대해서는 N-S-Ar 과 FH-H1 항목들이 유의한 차이를 보였다(p<0.05). 4. 최대 교합력과 유의성 있는 상관 관계를 보인 항목들은 제1대구치 최대 교합력에 대해서는 N-S-Ar, S-Ar-Go, UGA, FH-H6, FH-H1, body weight 그리고 MMO, 전치부 최대 교합력에 대해서는 Go-Me, P-1 그리고 IMPA등 이었다(p<0.05). 이상의 결과들을 종합해 볼 때, 제1대구치의 최대 교합력은 수직 전안면 고경이 짧을수록 증가하였다. 전치의 최대 교합력은 하악체 길이가 길수록, 상악 전방 치조부 고경이 클수록, 그리고 하악 절치들이 설측으로 경사져 있을수록 증가하였다(P<0.05).9\%$ 수준이었으며, 인장결합강토(TBS)에 대해서는 $52\%$ 수준이었고, Chessboard base에서 최저 Peel bond strength$(_{60}PBS)$는 전단결합강도(SBS)의 $34\%$ 수준이었으며, 인장결합강도(TBS)에 대해서는 $61\%$ 수준이었으며, Non-etched Foil-Mesh base에서 최저 Peel 결합 강도$(_{60}PBS)$는 전단결합강도(SBS)의 $34\%$ 수준이었으며, 인장결합강도(TBS)에 대해서는 $55\%$ 수준이었다. 4. 단위 면적 당 결합강도에 있어서 전단결합강도(SBS)와 인장결합강도(TBS) 및 $75^{\circ}\;와\;90^{\circ}$ peel 결합강도는 Micro-Loc base와 Chessboard base에서 차이 가 없었으며 Non-etched Foil-Mesh base에서 가장 작았고(p<0.05), $0^{\circ},\;15^{\circ},\;30^{\circ},\;60^{\circ}$ peel응력을 적용한 결과 Chessboard base에서 가장 큰 Peel결합강도를, Non-etched Foil-Mesh base에서 가장 작은 결합강도를 보였다(p<0.05).았다. 6. 주사전자현미경으로 본 표면은 모든 제품에서 생산과정 중에 보이는 압흔과 pitting이 관찰되는데, 진성기업의 Stainless Steel은 가늘고 긴 압흔이 있으며 비교적 매끄러운 표면을 보이고, Unitek사의 경우 압흔과 함께 pitting 이 관찰되며, Ormco Stainless Steel의 경우 불규칙한 pitting이 다수 존재했다.수술 시행 시기별의 차이를 보이지 않고 고른 분포를 보였다. 10. 내원한 환자를 순구개열

• Journal of Oral Medicine and Pain
• /
• 제25권2호
• /
• pp.173-189
• /
• 2000

The purpose of this study was to evaluate the effect of specific head positions on the mandibular rotational torque movements in maximum mouth opening, protrusion and lateral excursion. Thirty dental students without any sign or symptom of temporomandibular disorders(TMDs) were included as a control group and 90 patients with TMDs were selected and examined by routine diagnostic procedure for TMDs including radiographs and were classified into 3 subgroups : disc displacement with reduction, disc displacement without reduction, and degenerative joint disease. Mandibular rotational torque movements were observed in four head postures: upright head posture(NHP), upward head posture(UHP), downward head posture(DHP), and forward head posture(FHP). For UHP, the head was inclined 30 degrees upward: for DHP, the head was inclined 30 degrees downward: for FHP, the head was positioned 4cm forward. These positions were adjusted with the use of cervical range-of-motion instrumentation(CROM, Performance Attainment Inc., St. Paul, U.S.A.). Mandibular rotational torque movements were monitored with the Rotate program of BioPAK system (Bioresearch Inc., WI, U.S.A.). The rotational torque movements in frontal and horizontal plane during mandibular border movement were recorded with two parameters: frontal rotational torque angle and horizontal rotational torque angle. The data obtained was analyzed by the SAS/Stat program. The obtained results were as follows : 1. The control group showed significantly larger mandibular rotational angles in UHP than those in DHP and FHP during maximum mouth opening in both frontal and horizontal planes. Disc displacement with reduction group showed significantly larger mandibular rotational angles in DHP and FHP than those in NHP during lateral excursion to the affected and non-affected sides in both frontal and horizontal planes(p<0.05). 2. Disc displacement without reduction group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening as well as lateral excursion to the affected and non-affected sides in both frontal and horizontal planes. Degenerative joint disease group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening, protrusion and lateral excursion in both frontal and horizontal planes(p<0.05). 3. In NHP, mandibular rotational angle of the control group was significantly larger than that of any other patient subgroups. Mandibular rotational angle of disc displacement with reduction group was significantly larger than that of disc displacement without reduction group during maximum mouth opening in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group or degenerative joint disease group during maximum mouth opening in the horizontal plane(p<0.05). 4. In NHP, mandibular rotational angles of disc displacement without reduction group were significantly larger than those of the control group or disc displacement with reduction group during lateral excursion to the affected side in both frontal and horizontal planes. Mandibular rotational angle of disc displacement without reduction group was significantly smaller than that of the control group during lateral excursion to the non-affected side in frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group during lateral excursion to the non-affected side in the horizontal plane(p<0.05). 5. In NHP, mandibular rotational angle of the control group was significantly smaller than that of disc displacement with reduction group or disc displacement without reduction group during protrusion in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of the disc displacement with reduction group or degenerative joint disease group during protrusion in the horizontal plane. Mandibular rotational angle of the control group was significantly smaller than that of disc displacement without reduction group or degenerative joint disease group during protrusion in the horizontal plane(p<0.05). 6. In NHP, disc displacement without reduction group and degenerative joint disease group showed significantly larger mandibular rotational angles during lateral excursion to the affected side than during lateral excursion to the non-affected side in both frontal and horizontal planes(p<0.05). The findings indicate that changes in head posture can influence mandibular rotational torque movements. The more advanced state is a progressive stage of TMDs, the more influenced by FHP are mandibular rotational torque movements of the patients with TMDs.

• 대한치과교정학회지
• /
• 제31권2호통권85호
• /
• pp.225-236
• /
• 2001

일반적으로 골의 형태와 구조는 부착 근육의 활성과 밀접한 관련이 있다고 알려져 있으며,특히 악안면 형태와 저작근 기능과의 관계는 많은 임상 및 동물 실험을 통해 연구되어 왔다. 초음파검사는 임상적 적용이 용이하고 비용이 저렴할 뿐만 아니라 환자에 대한 유해성이 적어 의학분야의 여러 영역에서 널리 이용되고 있다. 이 연구의 목적은 교근의 두께와 악안면 골격 형태와의 상관성을 평가하는 것으로, 강릉대학교 치과대학 남학생 35명과 여학생 15명을 대상으로 하였다. 교근의 두께 측정에는 7.5MHz의 고해상도 직선 탐촉자에 의한 초음파진단장치가 사용되었고, 악안면 골격 형태의 결정은 측방 두부계측방사선사진 분석을 통해 이루어졌다. 이상의 계측치로부터 얻어진 결론은 다음과 같다. 1 남자에서 교근의 평균 두께는 안정 상태에서는 13.8${\pm}$1.71mm, 최대 교합 상태에서 14.8${\pm}$1.77mm였으며 여자에서는 안정 상태에서 11.6${\pm}$1.58mm, 최대 교합 상태에서 12.4${\pm}$1.47mm로 나타났다. 2. 교근의 두께는 남녀모두 안정 상태보다 최대 교합 상태에서 유의하게 증가하였다(P<0.05). 3. 교근의 두께는 안정 상태와 최대 교합 상태 모두에서 남자가 여자보다 유의하게 두꺼웠다(P<0.05). 4. 교근의 두께는 남자에서 안정 상태와 최대 교합 상태 모두 하악평면각과는 음의 상관 관계가 있고 하악지 고경, 전두개저 길이와는 양의 상관 관계가 있음을 알 수 있었다(P<0.05). 5. 여자에서는 교근 두께와 유의한 상관 관계가 있는 두부계측방사선사진 분석 항목을 찾을 수 없었다(P<0.05). 이로써초음파검사는 악골 근육의 기능을 평가하는 전통적인 방법에 대해 추가적인 정보를 제공해 줄 수 있을 것으로 사료된다.골 상실 증가에 따른 압하시 pure intrusion을 위한 후방견인력 변화는 다음과 같다. 1) 2 전치군과 4 전치군의 후방 견인력은 6 전치군의 후방 견인력에 비해 낮게 나타났다. 2) 치조골이 상실됨에 따라 각 치아군 후방견인력은 증가됨을 보였다. 4. 상악 전치부 치아군과 치조골 높이에 따른 저항중심의 수평적, 수직적 위치간 상관관계는 다음과 같다. 1) 2 전치군일 때, 치조골 상실에 따른 저항중심의 수직적 위치변화에 대한 수평적 위치 변화가 가장 크게 나타났다. 치아 수가 증가할수록 치조골 상실에 따른 저항중심의 수직적 위치 변화에 대한 수평적 위치변화는 작아지는 경향을 보였다. 2) 치조골 상실량이 커짐에 따라서는, 치아 수에 관계 저항중심의 수직적 위치변화에 대해 수평적 위치변화가 커졌다.라 일관성 있게 감소하였고, 제거속도는 Cu가 다른 원소에 비해 빨랐다. 제거속도는 FW 3개 수조 중 FW5&6에서 세 원소 모두 가장 느렸고, SW 3개 수조 중에서는 SW1&2에서 가장 빨랐다. SW와 FW간 제거속도 차이는 세 원소 모두 명확치 않았다 Cr은 FW에서 전반적으로 감소하는 경향을 보였지만 SW에서는 실험 초기에 감소하다 24시간 이후에는 증가 후 일정한 양상을 보였다. Pb은 FW에서 전반적으로 감소했지만 SW에서는 초기에 급격히 증가 후 다시 급격히 감소하는 양상을 보였다 Pb 또한 Cu, Cd, As와 마찬가지로 SW1&2에서 제거속도가 가장 빠르게 나타났다. FW 상층수 중 Hg는 시간에 따라 급격히 감소했고, 제거속도는 Fw5&6에서 가장 느렸다. 이러한 결과에 근거할 때 벼가 자라고 있고 이분해성 유기물이 풍부한 FW1&2, FW3&4 토양과 상층수에서는 유기물의 분해 활동이 활발하였지만, 벼가 경작되지 않는 FW5&6과 SW 에서는 유기물이 상대적으로 결핍되어 유기물의 분해활동이 적었을 것으로 판단된다.

• 지역사회간호학회지
• /
• 제1권1호
• /
• pp.465-502
• /
• 1989

The purpose of this study was to find out the general characteristics of school health teachers, the status of school health resources and the degrees of self-confident performance for the 124 school health teachers in Pusan City. Data was collected by means of questionaires from Aug. 1986 to Mar. 1987. The data were analyzed by use of percentage, mean, standard deviation, t-test, ANOVA and Pearson-correlation coefficient. The results of this study were as follows: 1 . General Characteristics of School Health Teachers (SHT) 1) The average of age of the SHT was 32.8 years old and 39.5% of them were from 30 to 34 years old. 2) The average for school nursing experience of the SHT was 7.9 years and 37.9% of them were from 5 to 9 years. 3) The 45.2% of them have not the clinical experience. 4) The 74.2% of them were graduated from the 3 years college of nursing. 2. Status of school health resources and nursing activities. 1) The average of student number was 2497.3 and class number was 45.2. 2) The average of school health budget was 1039000 won and 27.7% of school health budget expended on examination cost. 3) Only 29.0% of all schools have organization for school health. 4) The 84.7% of all schools have health clinic separately and 69.1% of schools have less than $33m^2$ sized. 5) The average of clinic visitor number was 2111.8 for 1 year. 6) Major problem was on digestive system. And other problems were skin, respiratory, musculo-skeletal system and dental problem. 7) The number of literal message was 14.4 times for 1 year. 3. The degree of the school health teachers' self-confidence. The school health teachers' self-confidence was deviced into 6 and the maximum degree was 4. 1) Program planning & evaluation; 2.8 2) Clinic management; 2.9 3) Health education, 3.0 4) Management of school environment; 2.7 5) Health care services; 2.7 6) Operating of school health organization; 2.4 4. Significances to the degree of self-confidence on school health nursing activities. 1) There was significant difference between clinical management and Religion (t=2.15 p<.05) 2) There was significant difference between Operating of school health organization and level of school (F=3.588 p<.05) 3) Program planning & evaluation: expending time for clinical management (r=-0.184 p<.05) expending time for health care services (r=0.273 p<.01) 4) Clinical management: use of separate health clinic (r=0.151 p<.05) 5) Health education: use of separate health clinic (r=0.170 p<0.5) 6) Health care services: No. of student (r=-0.144 p<0.5) No. of class (r=-0.160 p<.05) 5. The degree of the school health teachers' self-discipline. The school health teachers' self-discipline was devided into 2 and the maximum degree was 2. 1) Program planning & evaluation:1.8 2) Clinic management: 1.9 3) Health education: 1.9 4) Management of school environment: 1.7 5) Health care services: 1.8 6) Operating of school health organization.: 1.3 6. Significances to the degree of self-discipline on school health nursing activities 1) Program planning & evaluation; Level of nursing education (F=4.309 p<.01) 2) Clinical management: Level of nursing education (F=3.587 p<.05) 3) Operating of school health organization: School health organization (t=-2.68 p<.01) 4) Health care services: School health organization (t=2,58 p<.05) 5) School health performance: School health organization (t=2.32 p<.05) 6) Program planning & evaluation: School health experience (r=0.239 p<.01) Expending time for program planning & evaluation (r=-0.172 p<.05) 7) Clinic management: School health experience (r=0.249 p<.01) Expending time for dinic management (r=0.181 p<.05) No. of student (r=-0.158 p<.05) Expending time of program planning & evaluation (r=-0.199 p<0.5) 8) Health education: School health experience (r=0.234 p<0.1) Expending time of program planning & evaluation (r=-0.193 p<.05) 9) Management of school environment: Age of school health teacher (r=0.142 p<.05) School health experience (r=0.255 p<.01) 10) Operating of school health organization: Medicine Purchase (r=-0.163 p<.05) 11) Health care services: School health experience (r=0.148 p<.05) Medicine purchase (r=-0.229 p<.01) 12) Total school health performance: School health experience (r=0.200 p<.05) Medicine purchase(r=-0.168 p<.05) Based on the above results, the suggestions are as follows: 1) As the SHT take charge of the reasonable number of student, the students will have benefit of the good health service in quality. 2) It is recommended to use the health clinic separately and to arrange adequate place for good school health service. 3) It is necessary that the SHT participate budget for school health. 4) It is required to enhance self-confidence on school health nursing activities through continuous educational programs.