• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.247-251
• /
• 2001

;A dental developmental anomaly is defined as an isolated aberration in tooth form, caused by a disturbance or abnormality which occurred during tooth development. There are numerous types of dental anomalies, and a considerable variation in the extent of the defects occurs with each type. Teeth with these anomalies pose unique challenges. Since the defects are not always apparent clinically, they can confuse diagnosticians investigating the etiology of pulpal pathosis. When endodontic treatment is required, the defects often hinder access cavity preparation and canal instrumentation. Treatment planning also becomes more challenging, since the defects can create complicated periodontal problems, and the malformed teeth can be difficult to restore, particularly those weakened by endodontic therapy. Fusion is defined as the joining of two developing tooth germs resulting in a single large tooth structure. The incidence of fusion is < 1% in the Caucasian population, and it is believed that physical force or pressure produces contact of the developing teeth. Clinically and radiographically, a fused tooth usually appears as one large crown with at least partially separated roots and root canals. There may be a vertical groove in the tooth crown delineating the originally separate crowns. Dens invaginatus is a deep surface invagination of the crown or root that is lined by enamel. Teeth in both maxillary and mandibular arches may be affected, but the permanent maxillary lateral incisor is the tooth most commonly involved. Studies have revealed an incidence ranging from 0.25% to as high as 10%. The invagination ranges from a slight pitting to an anomaly occupying most of the crown and root. The invagination frequently communicates with the oral cavity, allowing the entry of irritants and microorganism either directly into pulpal tissues or into an area that is deparated from pulpal tissues by only a thin layer of enamel and dentin. This continuous ingress of irritants and the subsequent inflammation usually lead to necrosis of the adjacent pulp tissue and then to periapical or periodontal abscesses. If the invagination extends from the crown to the periradicular tissue and has no communication with the root canal system, the pulp may remain vital. Recommended treatment of fused tooth and dens invaginatus has been reported in the endodontic literature. This case report describes the endodontic treatment of a maxillary laterl incisors having fused crown and dens invaginatus.natus.

• 대한소아치과학회지
• /
• 제23권3호
• /
• pp.746-763
• /
• 1996

An alternative design to conventional class II cavity preparation for proximal carious lesions is the tunnel preparation. It preserves the marginal ridge intact, thus making it possible to maintain the natural contact relationship with the adjacent tooth and minimize tooth reduction. This in vitro study was purposed to evaluate the effect of the materials' elastic constants and shear-bond strength on the marginal ridge fracture resistance of teeth restored by the tunnel technique, and to find the materials of choice for tunnel restorations. $Resinomer^{(R)}$, $Ketac-silver^{(R)}$, $Miracle-Mix^{(R)}$, and Tytin were used as restorative material. The elastic constants of each restorative material were evaluated by ultrasonic pulse measurement. Young's modulus and bulk modulus of the restorative materials were evaluated in three specimens for each material type. The shear-bond strength of the restorative materials to the dentin surface was measured after thermocycling 400 times between 6 and $60^{\circ}C$, using ten specimens for each material type. For measuring marginal ridge strength, 60 sound extracted molar teeth were distributed into six groups by size. Sound molar teeth were used as a Control group and unfilled prepared teeth were grouped as Unrestored. Another four groups were named Resinomer group, Ketac-Silver group, Miracle Mix group, and Tytin group by type of restorative material. Tunnel cavity preparation was done with ' 1/2, 2, and 4 round burs in sequence. Initial access to proximal surface was made through an occlusal access preparation started at least 2mm from the marginal ridge, and the proximal opening was formed about 2.5mm below the marginal ridge. After restoration and thermocycling, marginal ridge strength was measured using a universal testing machine. The results were as follows: 1. The Young's modulus of $Tytin^{(R)}$ was 63.95 GPa, followed by $Ketac-Silver^{(R)}$ 27.60 GPa, $Miracle-mix^{(R)}$ 18.48 GPa, and $Resinomer^{(R)}$ 10.74 GPa showing significant differences between the groups(P<0.05). The bulk modulus of the materials showed the same order as Young's modulus. The value of $Tytin^{(R)}$ showed 59.57 GPa indicating that it will deform less than other materials under the same stress. It was followed by $Ketac-Silver^{(R)}$ 23.57 GPa, Miracle $Mix^{(R)}$ 12.50 GPa, and $Resinomer^{(R)}$ 11.60 GPa. 2. The Resinomer group had a shear-bond strength of 7.41 MPa which was significantly higher than those of the Ketac-Silver group (1.80 MPa) and the Miracle Mix group (2.84 MPa) (P<0.01). All the specimens of Tytin group detatched from the dentin surface during thermocycling. 3. The mean marginal ridge strength of the Unrestored group(46.14 kgf) was significantly lower than that of the Control group (84.24 kgf) (P<0.01). The marginal ridge strength of teeth restored by the tunnel technique was, in order, Ketac-Silver group 74.06 kgf, Miracle Mix group 73.36 kgf, Resinomer group 63.47 kgf, and Tytin group 58.76 kgf. The Ketac-Silver, Miracle Mix, and Resinomer groups showed no significant difference with the Control group (P>0.05), but the Tytin group showed significantly lower strength compared to the Control group(P<0.05). The results showed that the marginal ridge strength of the teeth restored by the tunnel technique was not significantly lower than that of sound teeth. They also demonstrated that the bonding strength of the restorative material to the tooth surface should be high and the modulus of elasticity should not be lower than that of the tooth in order to restore the marginal ridge strength to its natural condition.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.33.1-33.12
• /
• 2019

Objectives: To evaluate the influence of the restorative technique on the mechanical response of endodontically-treated upper premolars with mesio-occluso-distal (MOD) cavity. Materials and Methods: Forty-eight premolars received MOD preparation (4 groups, n = 12) with different restorative techniques: glass ionomer cement + composite resin (the GIC group), a metallic post + composite resin (the MP group), a fiberglass post + composite resin (the FGP group), or no endodontic treatment + restoration with composite resin (the CR group). Cusp strain and load-bearing capacity were evaluated. One-way analysis of variance and the Tukey test were used with ${\alpha}=5%$. Finite element analysis (FEA) was used to calculate displacement and tensile stress for the teeth and restorations. Results: MP showed the highest cusp (p = 0.027) deflection ($24.28{\pm}5.09{\mu}m/{\mu}m$), followed by FGP ($20.61{\pm}5.05{\mu}m/{\mu}m$), CR ($17.62{\pm}7.00{\mu}m/{\mu}m$), and GIC ($17.62{\pm}7.00{\mu}m/{\mu}m$). For load-bearing, CR ($38.89{\pm}3.24N$) showed the highest, followed by GIC ($37.51{\pm}6.69N$), FGP ($29.80{\pm}10.03N$), and MP ($18.41{\pm}4.15N$) (p = 0.001) value. FEA showed similar behavior in the restorations in all groups, while MP showed the highest stress concentration in the tooth and post. Conclusions: There is no mechanical advantage in using intraradicular posts for endodontically-treated premolars requiring MOD restoration. Filling the pulp chamber with GIC and restoring the tooth with only CR showed the most promising results for cusp deflection, failure load, and stress distribution.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제22권5호
• /
• pp.339-348
• /
• 2022

Background: To compare the anesthetic efficacy of supplemental buccal infiltration (BI) (1.7 ml) versus intraligamentary (IL) injection containing 0.4 ml of 4% articaine with 1:100.000 epinephrine after an inferior alveolar nerve block (IANB) with 1.7 ml 2% lidocaine in the first and second mandibular molars diagnosed with irreversible pulpitis (IP). Methods: One hundred subjects diagnosed with IP of either the mandibular first (n = 50) or second molars (n = 50) and failed profound anesthesia following an IANB were selected. They randomly received either the IL or BI techniques of anesthesia. Pain scores on a 170 mm Heft-Parker visual analog scale were recorded initially, before, and during supplemental injections. Furthermore, pulse rate was measured before and after each supplemental injection. During the access cavity preparation and initial filing, no or mild pain was assumed to indicate anesthetic success. The chi-square test, Mann-Whitney U test, and independent samples t-test were used for the analyses. Results: The overall success rates were 80% in the IL group and 74% in the BI group, with no significant difference (P = 0.63). In the first molars, there was no significant difference between the two techniques (P = 0.088). In the second molars, IL injection resulted in a significantly higher success rate (P = 0.017) than BI. IL injection was statistically more successful (P = 0.034) in the second molars (92%) than in the first molars (68%). However, BI was significantly more successful (P = 0.047) in the first molars (88%) than in the second molars (64%). The mean pulse rate increase was significantly higher in the IL group than in the BI group (P < 0.001). Conclusions: Both the IL and BI techniques were advantageous when used as supplemental injections. However, more favorable outcomes were observed when the second molars received IL injection and the first molars received BI.

• 대한장애인치과학회지
• /
• 제10권2호
• /
• pp.84-88
• /
• 2014

1. 순측접근법은 치수치료를 순측으로 시행한 후 변색된 순측의 치질을 확대하여 삭제하고 레진으로 순면전체를 수복함으로써 치수치료와 동시에 심미성을 회복할 수 있다. 2. 순측으로 치수치료를 시행하므로 시야가 확보에 유리하고 기구조작이 용이해 행동조절이 잘 되지 않는 어린이에게 추천된다.

• 대한치과보철학회지
• /
• 제14권1호
• /
• pp.47-54
• /
• 1976

Pulpal temperature is changed in response for various conditions which were mechanical, thermal, chemical and biological stimuli. This study was performed to determine the pulpal temperature changes which were using air turbine with air-water coolant, water coolant, and conventional dental engine with water coolant and no coolant on 28 canine of dogs. In order to record pulpal temperature, pulp chamber was opened on the labiocervical area of canine. Thermocouple was inserted into pulp chamber and was fixed with filling material(dycal). Changes of pulpal temperature were recorded on the physiograph, which had been standardized temperature degree, through thermocouple to thermistor bridge and carrier preamplifier. The amount of experimental temperature change to that of control was interpreted in the pulpal cavity. The obtained results were as followings: 1. The mean normal temperature was 33.07 centigrade. 2. The temperature was decreased than normal pulpal temperature. It was 12.04 centigrade in reduction by air turbine with air-water coolant, 7.17 centigrade in reduction by air turbine with air coolant, 5.54 centigrade in reduction by conventional engine with water coolant, and 1.26 centigrade in reduction by conventional engine with no coolant. 3. The time for maximal temperature change was 53.3 seconds in reduction by air turbine with air-water coolant, 73.4 seconds in reduction by air turbine with air coolant, 50.9 seconds in reduction by conventional engine with water coolant, and 27.1 seconds in reduction by conventional engine with no coolant. 4.. After reduction was ceased, the recovery time to normal pulp temperature was 287.1 seconds in air turbine with air-water coolant, 189.0 seconds in air turbine with air coolant, 86.9 seconds in conventional engine with water coolant, and 52.9 seconds in conventional engine with no coolant respectively.

• 대한소아치과학회지
• /
• 제35권1호
• /
• pp.65-72
• /
• 2008

소아환자의 진정법시 사용되는 환자감시 기구 중 하나인 pulse oximeter는 산소포화도를 감시하여 조기에 저산소혈증을 발견하는데 유용하게 이용된다. 이 연구의 목적은 진정법을 시행하지 않은 소아환자에서 pulse oximeter(pulse oximeter7845, Kontron Instrument Ltd., England)를 이용하여 일상적인 수복치료시 치료단계에 따른 심박동과 동맥혈 산소포화도의 양상이 어떻게 나타나는지 알아보고자 한다. 전북대학교병원 소아치과에 내원한 53명의 어린이를 대상으로 치료전 3분과 치료후 3분을 포함하여 수복치료 단계별로 심박동과 동맥혈 산소포화도가 기록되었고, 기록된 수치를 바탕으로 다음의 결과를 얻었다. 1. 비마취군에서 상, 하악 치료군 간 심박동 변화를 비교시 상악의 경우 러버댐 장착시 심박동이 급격히 증가한데 비해 하악치료군에서는 와동 형성시 심박동이 크게 증가하였다. 2. 마취군에서 상, 하악 심박동 변화를 비교시 상악치료군에서는 러버댐 장착을 기점으로 심박동이 감소되는 양상을 보인 반면, 하악 치료군은 와동형성시점부터 심박동이 감소되었다. 3. 비마취군에서 상, 하악 치료군 간 동맥혈 산소포화도를 비교하였을 때 상악 치료군은 치료 전부터 치료 후까지 비교적 일정한 값을 나타내며 모든 단계에서 하악보다 약간 높은 값을 보인 반면, 하악 치료군은 러버댐 장착시 증가하여 유지되다가 치료 후 다시 치료 전 수준과 유사하게 감소하는 양상을 보였다. 4. 마취군에서는 모든 단계에서 동맥혈 산소포화도 값이 99% 수준에 머물고 있으며, 상악과 하악 치료군 사이에 유의한 차이는 존재하지 않았다(p>0.05).

• 구강회복응용과학지
• /
• 제32권3호
• /
• pp.184-193
• /
• 2016

목적: 중합 시간이 bulk fill 유동성 복합레진의 미세누출에 미치는 영향을 마이크로시티를 이용하여 평가하고자 하였다. 연구 재료 및 방법: 30개의 발거된 인간 대구치에 변형된 2급 와동인 vertical slot cavity를 형성하였다. SonicFill과 SureFil SDR flow을 단일 충전하였으며, 다른 중합시간(20, 40, 60초)으로 광중합 하였다. 모든 표본은 5000번의 thermal cycle을 시행하였다. 치아는 silver nitrate 용액에 24시간 동안 침전 후 8시간 동안 현상액에 침전하였다. 마이크로시티를 사용하여 시편을 촬영 후 침투된 silver nitrate solution을 3차원적으로 재건하여 그 부피를 측정하였다. 변연 누출 결과값의 통계 처리는 Mann-Whitney test를 사용하였다. 결과: 광중합 시간의 증가는 두 bulk fill 유동성 복합레진에서 변연 누출을 증가시켰다. 두 복합레진 사이 유의한 차이는 없었다. 결론: 중합 시간은 bulk fill 유동성 복합레진의 변연 누출을 증가시킬 수 있는 요인이었다. 또한 마이크로시티를 통해 레진-치아 계면에서 변연 누출의 양을 비파괴적 방법으로 3차원적으로 재건하여 측정할 수 있었다.

• Journal of Oral Medicine and Pain
• /
• 제30권3호
• /
• pp.375-381
• /
• 2005

기존의 치과용 핸드피스를 대체할 수 있는 효과적인 치아 삭제 방법인 Er:YAG 레이저를 이용하여 보다 효과적으로 치아를 삭제하기 위해 여러 가지 변수들, 즉 펄스에너지, 조사반복율 및 레이저 조사 동안의 물분사량에 대한 다양한 연구가 진행되어 왔다. 특히 이 중에서도 물분사량은 삭제 효율이 높이면서 치수를 보호할 수 있는 중요한 요소로 여겨지고 있다. 레이저 조사 동안 분사되는 물의 양이 적으면 치아에 균열이나 탄화를 유발하고 치수손상을 야기할 수 있는 위험이 있는 반면, 물의 양이 지나치게 많으면 삭제효율이 저하되고 레이저 시술동안 치과의사의 시야확보를 방해할 수 있으므로, 조사조건에 따른 가장 적절한 물 분사량을 결정하는 것이 아주 중요하다. 본 연구에서는 특정조사조건에서 치아법랑질 삭제에 가장 효과적인 물분사량을 결정하고, 그 물분사량을 적용하였을 때 치수내에서 발생하는 온도변화를 측정하여 안전성 여부를 함께 평가하고자 하였다. 발거된 건전치아를 표본으로 하여, 20 Hz의 조사반복율, 200 mJ 및 300 mJ의 펄스에너지의 조사조건에서 1.6, 3.0, 5.0, 7.0, 10.0 ml/min의 서로 다른 물분사량을 적용하여 치아삭제 효과를 평가하였다. 이때 레이저 조사시간은 3초로 고정하였다. 삭제효율은 조사 전후의 치아무게를 측정하여 그 차이로 결정하였으며 온도측정을 위해서는 별도의 치아를 준비하여 온도측정장치를 조사측과 반대측의 치수벽에 위치하여 레이저조사 동안의 온도변화를 추적하였다. 실험결과, 200 mJ과 300 mJ 모두에서 1.6 ml/min의 가장 적은 물분사량이 치아삭제효율이 가장 좋았다. 또한 이 조건에서의 온도변화를 측정한 경우에도 치수손상을 일으키지 않을 정도의 미미한 온도상승만을 보여주었다. ANOVA 분석의 결과 조사부위(조사측과 비조사 반대측)에 따른 유의한 차이가 나타났으나(p<0.05), 펄스에너지에 따라 각각 비교하였을 때는 유의한 차이를 보여주지 않았다. 그러므로 본 실험의 결과에 따르면, 1.6 ml/min의 비교적 적은 양의 물을 레이저 조사시에 함께 분사해 준다면 200$\sim$300 mJ의 펄스에너지, 20 Hz의 조사반복율, 3초의 레이저조사시간이라는 조건에서는 치수손상을 일으키지 않는 안전한 범위에서 가장 효과적으로 치아를 삭제할 수 있을 것으로 생각된다.