• 한국작물학회지
• /
• 제30권1호
• /
• pp.20-25
• /
• 1985

수도품종 "밀양 23호"를 공시하여 이앙밀도를 달리하면서 재배중의 작업단계별 노동요구도와 수도수량성 및 노동생산성의 변동특성을 조사하였다. 노동요구시간 자체는 표준밀도(22.22주/$m^2$)에서10a당 144시간을 소요하였으나 $m^2$당 밀도를 15.15, 11.11, 8.33주로 감소시킴에 따라 각각 129.116.104시간으로 줄어들었다. 따라서 표준에 대비하여 각각10, 20, 28%의 시간절감이 되었으며, 이앙작업 자체만의 시간에서는 각각 28, 39, 61%의 절감이 가능하였다. 수도수량성에 있어서는 소식에 따른 수량저하를 감소화하고, 보완효과의 최대화를 전제로 하여 $m^2$당12주까지의 일차적인 밀도감소의 한계목표을 설정할 수 있었다. 노동생산성에 있어서는 $m^2$당 11주까지의 소식화로 생산성 향상을 극대화할 수 있을 것으로 판단되었으며, 이들의 종합적 결론을 위하여 품종.시비 및 밀도간의 상호작용 특성에 대한 추후의 연구가 요구되는 것으로 판단되었다.것으로 판단되었다.

• 지질공학
• /
• 제34권1호
• /
• pp.67-105
• /
• 2024

This study compares the quartzites of four quartzite units: The Fagfog Quartzite, Dunga Quartzite (member of the Robang Formation), Pandrang Quartzite (member of the Kalitar Formation) and the Chisapani Quartzite. The analysis shows variations in flakiness and elongation, as the Fagfog Quartzite displays low flakiness whereas the Pandrang and the Chisapani have moderate and the Dunga Quartzite has shown variations. The density values of the four quartzite units remain consistent, indicating uniform physical properties and porosity levels. However, bulk density values differ among the quartzites, suggesting variations in particle arrangement, porosity, and density. Regarding strength measures, the Pandrang and the Chisapani Quartzite have higher strength characteristics as compared to the Fagfog and the Dunga Quartzites. The Pandrang Quartzite has the highest average point load strength index, classifying it as "Extremely Strong". The resistance to impact and crushing forces varies among the quartzites, with lower Aggregate Impact Value (AIV) and Aggregate Crushing Value (ACV) indicating higher strength and durability. Durability tests show that the Fagfog Quartzite has high durability against slaking, with a slight decrease observed after the fifth cycle. The Dunga Quartzite shows varying degrees of weathering, while the Pandrang and the Chisapani Quartzite have minimal weight changes, indicating strong resistance to weathering. Magnesium sulfate soundness tests indicate high durability and resistance to degradation for all four units. The Los Angeles abrasion value (LAAV) tests indicate favorable resistance to abrasion for the majority of the Fagfog, Dunga, and the Pandrang Quartzites samples, while Chisapani Quartzite shows more variability in LAAV values. The Pandrang Quartzite shows a higher proportion of elongated particles but lower flakiness index values as compared to Fagfog and Dunga Quartzites while Chisapani Quartzite stands out with a significantly higher presence of flaky particles and lower elongation index values. Mechanically, the Fagfog and Dunga Quartzite show higher strength and better resistance to abrasion and freeze and thaw. The Pandrang Quartzite shows moderate resistance to crushing and sudden effect, while the Chisapani Quartzite has variable resistance to effect. This comparative study emphasizes the diversity and complexity of quartzite rock types, showing the need for comprehensive characterization and assessment to determine their suitability for specific applications.

• Journal of Magnetics
• /
• 제15권4호
• /
• pp.190-193
• /
• 2010

The design of joints in a transformer core significantly affects the transformer's efficiency. Air gaps cause variations in the flux distribution at the joints of the laminations, which depend on the geometry. Two similar samples consisting of electrical steel strips and amorphous ribbons were made. The spatial flux distributions were determined using an array of search coils for each sample. 2D models of these samples were created and examined by finite element analysis. The magnetic flux distribution for each lamination in the samples was computed. The results show that the flux density in amorphous ribbons above and below the air gap starts to approach saturation at lower flux density levels than for electrical steel. The flux density measured using the search coil under the air gap is increased in amorphous ribbons and decreased in the electrical steel with increasing frequency.

• Journal of Astronomy and Space Sciences
• /
• 제31권1호
• /
• pp.7-13
• /
• 2014

Variabilities in the solar wind cause disturbances throughout the heliosphere on all temporal and spatial scales, which leads to changeable space weather. As a view of space weather forecasting, in particular, it is important to know direct and indirect causes modulating the space environment near the Earth in advance. Recently, there are discussions on a role of the interaction of the solar wind with Mercury in affecting the solar wind velocity in the Earth's neighborhood during its inferior conjunctions. In this study we investigate a question of whether other parameters describing the space environment near the Earth are modulated by the inner planets' wake, by examining whether the interplanetary magnetic field and the proton density in the solar wind observed by the Advanced Composition Explorer (ACE) spacecraft, and the geomagnetic field via the Dst index and Auroral Electrojet index (AE index) are dependent upon the relative position of the inner planets. We find there are indeed apparent variations. For example, the mean variations of the geomagnetic fields measured in the Earth's neighborhood apparently have varied with a timescale of about 10 to 25 days. Those variations in the parameters we have studied, however, turn out to be a part of random fluctuations and have nothing to do with the relative position of inner planets. Moreover, it is found that variations of the proton density in the solar wind, the Dst index, and the AE index are distributed with the Gaussian distribution. Finally, we point out that some of properties in the behavior of the random fluctuation are to be studied.

• 한국초지조사료학회지
• /
• 제10권1호
• /
• pp.1-9
• /
• 1990

Tillering of orchardgrass during establishment year was considered as an important factor for ground cover and forage yield. Field experiment was conducted to examine seasonal fluctuation of tiller number in three cultivars of orchardgrass; Potomac, Hall-mark, and Sumas, after transplanting with five planting density. Also, effects of plant density and nitrogen application in cultivar, Potomac were studied on tillering, forage yield and various growth characteristics in pot experiment Tillers per plant decreased with increased density and showed seasonal variations. It increased up to July, decreased during summer months, and increased again from October. Sumas had less tillers than other cultivars, especially at high density. Tillers per unit area kept high during spring. After then, there was stady decrease through summer and remained constant without affecting by planting density. Nitrogen application increased tillers per unit area in Potomac up to 20kg/10a, but decreased its tiller production at 40kg/lOa. Maximum number of tiller was obtained in the combinations of 20kg application of nitrogen with higher density than 324 plant per square meter. Forage yield increased as nitrogen application increased, while it did not respond to plant density. Forage yield had high linear correlation between LAI, leaf number with a peak at 2800 culrns. For high forage yielding, it was suggested to obtain optimum number of tillers per unit area in early season as possible, applying of adequate amount of nitrogen with relative high density depend on cultural condition.

• 대한의용생체공학회:의공학회지
• /
• 제18권4호
• /
• pp.333-338
• /
• 1997

Abnormal intraosseous flow and pressure in trabecular bone could cause various pathological conditions such as osteonecrosis and osteoarthritis. Characteristics of intraosseous fluid flow and pressure generation in porous trabecular bone can be significantly affected by the permeability. Factors which determine the permeability could be the porosity and apparent density of trabecular bone. However, there is little data on the permeability and the relationship among the permeability. porosity, and apparent density of trabecular bone. In this study. the permeability. porosity, and apparent density of human lumbar vertebral trabecular bone were experimentally measured. Also, a power relationship among the permeability, porosity, and apparent density was investigated to understand effects of the porosity and apparent density variations on the permeability of trabecular bone based on Kozeny-Carman equation. A near linear relationship between intraosseous fluid flow and time indicated that the fluid phase flowed through the pores in trabecular bone is governed by the permeability. The permeability of trybecular bone was found to have a significant power relationship with the porosity and apparent density (r: 0.84 and $\textit{p}$< 0.0005). The power relationship could be useful to determine the permeability of trybecular bone after measuring the apparent density and porosity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.140-140
• /
• 2009

The polymer electrolyte membrane fuel cell(PEMFC) with the advantages of low-operating temperature, high current density, low cost and volume, fast start-up ability, and suitability for discontinuous operation becomes the most reasonable and attractive power system for transportation vehicle and micro-grid power plant in a household. 200W PEM-type FCs system was integrated by this study, then the electrical characteristics and diagnosis of the fuel cell were analyzed with variations on mass flow rate and stack temperature. The ranges of the variations are $20{\sim}70^{\circ}C$ on stack temperature and 1~8L/min on $H_2$ volume.

• 소음진동
• /
• 제8권6호
• /
• pp.1130-1136
• /
• 1998

A modelling method for the vibration analysis of rotating cantilever plates with a concentrated mass is presented. The equations of motion for the rotating plates with a concentrated mass located in an arbitrary position are derived and transformed into a dimensionless form. For the mathematical modelling of the concentrated mass. a mass density Dirac delta function is used. The effects of concentrated mass and its location. angular speed. plate aspect ratio. and hub radius of the rotating plate on the natural frequencies are studied. Particularly. mode shape variations due to some parameter variations are investigated.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.563-567
• /
• 2009

The polymer electrolyte membrane fuel cell(PEMFC) with the advantages of low-operating temperature, high current density, low cost and volume, fast start-up ability, and suitability for discontinuous operation becomes the most reasonable and attractive power system for transportation vehicle and micro-grid power plant in a household. 200W PEM-type FCs system was integrated by this study, then the electrical characteristics and diagnosis of the fuel cell were analyzed with variations on mass flow rate and stack temperature. The ranges of the variations are 1~8L/min on $H_2$ volume and $20{\sim}70^{\circ}C$ on stack temperature.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권2호
• /
• pp.91-98
• /
• 1998

In this study, we carried out the experiments for measuring the variations of corrosion potential and current density for polarization curves with polyvinylchloride. The results exhibited especially the influence affecting the corrosion potential and various conditions (temperature, day, pH, bacteria, and added salt). The second anodic current density peak and the minimum passive current density are designated $I_P/I_0,$ respectively. The value of $I_P/I_O$ is used as a measurement for the extent of degradation of the polyvinylchloride. The potentiodpnamics parameters of the corrosion were obtained using Tafel equation.