• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.12-19
• /
• 2022

Propellant grains with embedded metal wires have been used for enhancement of burning rate while maintaining high loading density. For the performance design of a solid rocket motor using propellant grain with embedded metal wires, burn-back analysis is required according to number, location, arrangement angle of metal wires, and augmentation ratio of the propellant burning rate near a wire region. In this study, a numerical method to quickly calculate a burning surface area was developed in response to the design change of the propellant grain with embedded metal wires. The burning surface area derived from the developed method was compared with the results of a CAD program. Error rate decreased as the radial size of the grid decreased. Analysis for characteristics of burning surface area was performed according to the number and location of metal wires, the initial and final phases were shortened and the steady-state phase was increased when the number of metal wires increased. When arranging the metal wires at different radii, the burning surface area rapidly increased in the initial phase and sharply decreased in the final phase compared to the case where the metal wires were disposed in the same radius.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.44-52
• /
• 2022

Epoxy resin has the disadvantage of being easily destroyed by instantaneous impact due to its high crosslinking density despite its high glass transition temperature (T_g) and excellent properties. To compensate for this, in this study, polyol was synthesized by ring opening polymerization of propylene glycol (PPG) diamine, Jeffamine D 2000 and propylene carbonate, and urethane modified epoxy was synthesized using this. The properties of the synthesized urethane modified epoxy were confirmed by FT-IR, H-NMR. To confirm the degree of improvement in impact resistance as an adhesive, a urethane modified epoxy adhesive was prepared by mixing a digylcidyl ether bisphenol A (DGEBA) with curing agent and curing accelerator. Properties test of urethane modified epoxy were shear strength, tensile strength and impact strength. As a result, excellent results were obtained in all test when the ratio of DGEBA : urethane modified epoxy was 8:2.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.149-156
• /
• 2021

The mechanical properties of a woven fabric made of SiC (silicon carbide) fibers were determined in this study using the KES-FB system. The woven fabric is used in high heat settings above 1500℃. Composite spun yarns were used to create SiC fibers. By analyzing the wearing properties, we studied the prospect of using the textiles as fire-retardant work clothes. Mechanical properties determine the wearing attributes. Therefore, the tensile linearity (LT), tensile resilience (RT), and shear stiffness (G) values of the fabric varied according to the yarn type (filament or spun yarn). The thickness, weight per square meter, and density of the fabric were found to have an effect on the shear hysteresis (2HG) and compression resilience (RC) values. In terms of wearable clothing qualities, the fabric qualities of the SiC composite yarn demonstrated the highest ratio of compressive energy to thickness (WC/T), which indicates bulkiness. The fabric manufactured from SiC composite yarns passed the KFI criteria for carbonation length and cumulative flame time in the flame-retardant test. Therefore, we discovered that the material can be used as a fire-resistant work cloth.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.23-36
• /
• 2021

In this paper, the effect of shear rate on internal friction angle and unconfined compressive strength of non-cemented and cemented sand was investigated. A dry Jumunjin sand was prepared at loose, medium, and dense conditions with a relative density of 40, 60 and 80%. Then, series of direct shear tests were conducted at shear rates of 0.32, 0.64, and 2.54 mm/min. In addition, a cemented sand with cement ratio of 8% and 12% was compacted into a cylindrical specimen with 50 mm in diameter and 100 mm in height. Unconfined compression tests on the cemented sand were performed with various shear rates such as 0.1, 0.5, 1, 5 and 10%/min. Regardless of a degree of cementation, the unconfined compressive strength of the cemented sand and the angle of internal friction of the non-cemented sand tended to increase as the shear rate increased. For the non-cemented sand, the angle of internal friction increased by 4° at maximum as the shear rate increased. The unconfined compressive strength of the cemented sand also increased as the shear rate increased. However, its increasing pattern declined after the standard shear rate (1 mm/min). A discrete element method was also used to analyze the crack initiation and its development for the cemented sand with shear rate. Numerical results of unconfined compressive strength and failure pattern were similar to the experimental results.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.283-288
• /
• 1982

This experiment was carried out to improve the cultural practices of seedlings and to investigate the proper planting density in aromatic tobacco, Sohang. Two different cultural practices of seedling were employed; Temporary transplanting (TT; Conventional practices) and non temporary transplanting (N.T.). Vinyl pot sizes were $3.5cm{\times}3.5cm, \;4cm{\times}4cm$ and $5cm{\times}5cm$ Plants per hole were 1, 3, 5, 7 and 9. There were little difference among the vinyl pot sizes in all characters except the survival ratio. But it may be little problem on cultural practices by 7 plants per hole in $5cm\times$5cm vinyl pot. There were not significant in price per kg, yield per 10a and value per 10a between two cultural practices of seedlings and among three pot sizes. Mildness and filling power were increased by increasing the plants per hole. Combustibility of 5-9 plants were better than those of 1-3 plants per hole. The growing of 6 seedlings per hole in $5cm\times$5cm vinyl pot by non temporary transplanting resulted the best cultural practices for an aromatic tobacco, Sohyang.

• Korean Journal of Ecology and Environment
• /
• v.55 no.4
• /
• pp.320-329
• /
• 2022

Urban areas in watersheds increase the impervious surface, and agricultural areas deteriorate the water quality of rivers due to the use of fertilizers. As such, anthropogenic land use affects the type, intensity and quantity of land use and is closely related to the amount of substances and nutrients discharged to nearby streams. Riparian vegetation reduce the concentration of pollutants entering the watershed and mitigate the negative impacts of land use on rivers. This study analyzes the data through correlation analysis and regression analysis through point data measured twice a year in spring and autumn in 21 selected damaged tributary rivers within the Han River area, and then uses a structural equation model to determine the area land use. In the negative impact on water quality, the mitigation effect of riparian vegetation was estimated. As a result of the correlation analysis, the correlation between the agricultural area and water quality was stronger than that of the urban area, and the area ratio of riparian vegetation showed a negative correlation with water quality. As a result of the regression analysis, it was found that agricultural areas had a negative effect on water quality in all models, but the results were not statistically significant in the case of urban areas. As a result of the model estimated through the structural equation, BOD, COD, TN, and TP showed a mitigation effect due to the accumulation effect of river water quality through riparian vegetation in agricultural areas, but the effect of riparian vegetation through riparian vegetation was found in urban areas. There was no These results were interpreted as having a fairly low distribution rate in urban areas, and in the case of the study area, there was no impact due to riparian forests due to the form of scattered and distributed settlements rather than high-density urbanized areas. The results of this study were judged to be unreasonable to generalize by analyzing the rivers where most of the agricultural areas are distributed, and a follow-up to establish a structural equation model by expanding the watershed variables in urban areas and encompassing the variables of various factors affecting water quality research is required.

• Korean Journal of Materials Research
• /
• v.33 no.8
• /
• pp.330-336
• /
• 2023

The effects of Ni²⁺ substitution for Mg²⁺-sites on the microwave dielectric properties of (Mg_1-xNi_x)(Ti_0.95(Mg_1/3Ta_2/3)_0.05)O₃ (0.01 ≤ x ≤ 0.05) (MNTMT) ceramics were investigated. MNTMT ceramics were prepared by conventional solid-state reaction. When the MgO / TiO₂ ratio was changed from 1.00 to 1.02, MgTi₂O₅ was detected as a secondary phase along with the MgTiO₃ main phase in the MNTMT specimens sintered at 1,400 ℃ for 4h. For the MNTMT specimens with MgO / TiO₂ = 1.07 sintered at 1,400 ℃ for 4h, a single phase of MgTiO₃ with an ilmenite structure was obtained from the entire range of compositions. The relative density of all the specimens sintered at 1,400 ℃ for 4h was higher than 95 %. The quality factor (Qf) of the sintered specimens depended strongly on the degree of covalency of the specimens, and the sintered specimens with x = 0.01 showed the maximum Qf value of 489,400 GHz. The dielectric constant (K) decreased with increasing Ni²⁺ content because Ni²⁺ had a lower dielectric polarizability (1.23ų) than Mg²⁺ (1.32ų). As Ni²⁺ content increased, the temperature coefficient of resonant frequency (TCF) improved, from -55.56 to -21.85 ppm/℃, due to the increase in tolerance factor (t) and the lower dielectric constant (K).

• Journal of Korea Water Resources Association
• /
• v.56 no.9
• /
• pp.587-602
• /
• 2023

Due to climate change, population growth, and economic development, the demand for water in the urban water system (UWS) and the energy required for water use constantly increase. Therefore, beyond the traditional method of considering only the water sector, the Nexus approach, which considers synergies and trade-offs between the water and energy sectors, has begun to draw attention. In previous researches, the Nexus methodology was used to demonstrate that the UWS is an energy-intensive system, analyze the water-energy efficiency relationship surrogated by energy intensity, and identify climate (long-term climate change, drought, type), geographic characteristics (topography, flat ratio, location), system characteristics (total supply water amount, population density, pipeline length), and operational management level (water network pressure, leakage rate, water saving) effects on the UWS. Through this, it was possible to suggest the direction of policies and institutions to UWS managers. However, there was a limit to establishing and implementing specific action plans. This study built the energy intensity matrix of the UWS, quantified the impact of city conditions, external influences, and operational management levels on the UWS using the water-energy Nexus model, and introduced water-energy efficiency criteria. With this, UWS managers will be able to derive strategies and action plans for efficient operation management of the UWS and evaluate suitability and validity after implementation.

• Korean Journal of Community Nutrition
• /
• v.28 no.4
• /
• pp.302-316
• /
• 2023

Objectives: The study aim was to identify changes in the nutritional status of older adults during the COVID-19 pandemic according to household income and demographic characteristics. Methods: Study participants were 2,408 adults aged 65 and over who participated in the 2019-2020 Korea National Health and Nutrition Examination Survey (KNHANES). To examine changes in nutrient intake levels resulting from COVID-19, data of 2019 and of 2020 were compared. Study participants were divided into three groups based on household income level to compare these changes. The changes were compared according to household income level, age group, and household type. Results: Percentages of recommended intakes for energy, protein, and most micronutrients were the lowest for the low-income group of both males and females in 2020. The Mean Adequacy Ratio (MAR) score was the lowest for the low-income group in both years. When comparing nutrient density for 2019 and 2020 by income group, the male low-income group experienced a decrease in nutrient densities of vitamin A, thiamine, calcium, and iron. For the same group, a decreased percentage for energy intake from protein was noted. Fruit intake was lowest in the low-income group for both males and females. Low-income males had the lowest intake levels for meat, fish, eggs, and legumes in both 2019 and 2020 and the lowest milk and milk product intake levels in 2020. Older adults living alone or single older adults with children had lower MAR scores than those living with a spouse. Older adults living alone experienced decreases in energy and thiamine and iron intake levels in 2020 compared to their intake levels in 2019. Conclusions: Because of the COVID-19 pandemic, nutrition intake levels worsened for older adult males in the low-income group and older adults living alone. This finding shows the need for a more systematic nutritional support strategy for the vulnerable older adults population in national disaster situations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.27-30
• /
• 2022

The plasma process, which has many advantages in terms of efficiency and environment compared to conventional process methods, is widely used in semiconductor manufacturing. Plasma Sheath is a dark region observed between the plasma bulk and the chamber wall surrounding it or the electrode. The Plasma Sheath Monitoring Sensor (PSMS) measures the difference in voltage between the plasma and the electrode and the RF power applied to the electrode in real time. The PSMS data, therefore, are expected to have a high correlation with the state of plasma in the plasma chamber. In this study, a model for predicting the state of nitrogen ions in the plasma chamber is training by a deep learning machine learning techniques using PSMS data. For the data used in the study, PSMS data measured in an experiment with different power and pressure settings were used as training data, and the ratio, flux, and density of nitrogen ions measured in plasma bulk and Si substrate were used as labels. The results of this study are expected to be the basis of artificial intelligence technology for the optimization of plasma processes and real-time precise control in the future.