• E2M - 전기 전자와 첨단 소재
• /
• 제7권4호
• /
• pp.312-316
• /
• 1994

In this study, ln$_{1-x}$ Ga$_{x}$P alloy crystal which has different compositions were grown by the temperature gradient solution(TGS) method, and the properties of deep levels were measured in the temperature range of 9OK-450K. We find the four deep levels of E$_{1}$, E$_{2}$(248meV), E$_{3}$(386meV) and E$_{4}$(618meV) in GaP, which has composition of Ga in In$_{1-x}$ Ga$_{x}$P is one, and the trap densities of E$_{3}$ and E4 levels were 7.5*10$^{14}$ cm$^{-3}$ and 9*10$^{14}$ cm$^{-3}$ , respectively. A broad deep level spectra was revealed in In$_{1-x}$ Ga$_{x}$P whose composition of Ga, x, were 0.56 and 0.83, and the activation energy and trap densities were about 430meV and 6*10$^{14}$ cm$^{-3}$ , respectively.ectively.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.693-699
• /
• 2000

Casting behavior of Zr(Y,Ce)O2 TZP/Mullite suspension during pressure filtration was investigated to prepare multi-layered Functionally Gradient Materials(FGM). The dispersion stabilities of each layer suspension were investigated by examination of zeta potential and viscosity. The each suspensions with 20 vol.% solid loading and 100 첸 of viscosity was prepared after fix of the dispersing agent (Sodium hexa-meta phosphate) and the binder (Hydroxyethyl cellulose), and then the cakes were formed at the 2.5 MPa~10.0MPa pressure range. The cake thickness of all suspensions was increased with the square root of time at the constant pressure, and the relations between filtration pressure(P)a nd dehydration rate (Q=dh/dt) showed that the flows of filtrates in the consolidated layers were laminar. The permeabilities were nearly constant during filtration, and kozeny constants(Kc) of the suspensions were 4.8~6.7. These valumes were seen as close to 5, which might be homogeneous particle packing during filtration. On the basis of those data, the multi layered compaction with 9 mm thickness and 52.5% green density was prepared by continuous pressure filtration.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.352-361
• /
• 2018

This paper proposes a sensing system of the Halbach array permanent magnet spherical motor(PMSM). The rotor position can be obtained by solving three rotation angles, which revolves around 3 reference axes of the stator. With the development of 3-D hall sensor, the position identification problem of the Halbach array PMSM based on rotor magnetic field is studied in this paper. A nonlinear and serious coupling relationship between the rotation angles and the measured magnetic flux density is established on the basis of the rotation transformation theory and the magnetic field model. In order to get rid of the influence on position detection caused by the harmonics of rotor magnetic field and the stator coil magnetic field, a sensor location combination scheme is proposed. In order to solve the nonlinear equation fast and accurately, a new position solution algorithm which combines the merits of gradient projection and particle swarm optimization(PSO) is presented. Then the rotation angles are obtained and the rotor position is identified. The validity of the sensing system is verified through the simulation.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권3호
• /
• pp.81-85
• /
• 2000

The effects of $NH_3$ flow rate and reactor pressure on Al composition and the interface of AlGaN/GaN heterostructure were studied. Equilibrium partial pressure of Ga and Al over AiGaN alloy was calculated as a function of growth pressure, $NH_3$flow rate and temperature. It was found equilbrium vapor pressure of Al is significantly lower than that of Ga, thus, the alloy composition mainly controlled by Ga partial pressure. We believe that more decomposition of Ga occur at lower $NH_3$ flow rate and higher growth pressure leads to preferred Al incorporation into AlGaN. The alloy composition gradient became larger at AlGaN/GaN heterointerface at higher reactor pressures, higher Al composition and low $NH_3$ flow rate. This composition gradient lowered sheet carrier concentration and electron mobility as well. We obtained an AlGaN/GaN heterostructure with sheet carrier density of ${\sim}2{\times}10^{13}cm^{-2}$ and mobility of 1250 and 5000 $cm^2$/Vs at 300 K and 100 K, respectively.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2355-2364
• /
• 2018

We evaluated the effect of particle size and associated dynamics on a hydrocyclone separation process in order to understand the movement of the particle trajectories inside the hydrocyclone via numerical analysis, with particles of acid hydrolysis residues discharged in $TiO_2$ production via the sulfate method as a case study. The values obtained from the numerical simulation were successfully compared with those from experimental tests in the literature, allowing a description of the dynamics of the particles, their acting forces, and their relevant properties together with separation efficiency. The results showed that particle motion is jointly controlled by the drag force, the pressure gradient force and the centrifugal force. With increasing particle size, the influence of the drag force is weakened, whereas that of the centrifugal force and pressure gradient is strengthened. Factors including particle density, slurry viscosity, and inlet slurry flow rate also contribute to a clear and useful understanding of particle motion behavior in the hydrocyclone as a method for improving the separation efficiency.

• 한국전기전자재료학회논문지
• /
• 제35권4호
• /
• pp.372-376
• /
• 2022

Since the ZnO varistor is a semiconductor device, the internal thermal distribution during the varistor operation is recognized as an important factor in the performance and deterioration of the varistor. For an optimal varistor structure design, the thermal runaway phenomenon during the varistor operation was interpreted using the Comsol 5.2 analysis program by a finite element analysis. The maximum temperature of the center measured in the cross section of the ZnO varistor was confirmed to increase as the temperature moved from the lower electrode to the center towards the upper electrode up to 572.6 K. The electrodes are thinned so that the influence of the Schottky barrier is not great. The heat gradient balance is determined to be improved when the electrode of the hybrid form is introduced. The thickness, density, pore distribution, impurity uniformity, and particle size of the ZnO varistor are required, and it is determined that the pyrolysis gradient will be improved regardless of the electrode thickness. When these results are applied to design the ZnO varistor, the optimal structure of the ZnO varistor can be obtained.

• Steel and Composite Structures
• /
• 제43권5호
• /
• pp.639-660
• /
• 2022

The bending and buckling behaviours of FG-GRNC laminated sandwich plates are investigated by using novel five-variables quasi 3D higher order shear deformation plate theory by considering the modified continuum nonlocal strain gradient theory. To calculate the effective Young's modulus of the GRNC sandwich plate along the thickness direction, and Poisson's ratio and mass density, the modified Halpin-Tsai model and the rule of the mixture are employed. Based on a new field of displacement, governing equilibrium equations of the GRNC sandwich plate are solved using a developed approach of Galerkin method. A detailed parametric analysis is carried out to highlight the influences of length scale and material scale parameters, GPLs distribution pattern, the weight fraction of GPLs, geometry and size of GPLs, the geometry of the sandwich plate and the total number of layers on the stresses, deformation and critical buckling loads. Some details are studied exclusively for the first time, such as stresses and the nonlocality effect.

• Geomechanics and Engineering
• /
• 제38권1호
• /
• pp.93-106
• /
• 2024

The present paper investigates the spatial variability effect of soil property on the three-dimensional probabilistic characteristics of the bearing capacity factor (i.e., mean and coefficient of variation) of a circular footing resting on clayey soil where both mean and standard deviation of undrained shear strength increases with depth, keeping the coefficient of variation constant. The mean trend of undrained shear strength is defined by introducing the dimensionless strength gradient parameter. The finite difference method along with the random field and Monte Carlo simulation technique, is used to execute the numerical analyses. The lognormal distribution is chosen to generate random fields of the undrained shear strength. In the study, the potential failure of the structure is represented through the failure probability. The influences of different vertical scales of fluctuation, dimensionless strength gradient parameters, and coefficient of variation of undrained shear strength on the probabilistic characteristics of the bearing capacity factor and failure probability of the footing, along with the probability and cumulative density functions, are explored in this study. The variations of failure probability for different factors of safety corresponding to different parameters are also illustrated. The results are presented in non-dimensional form as they might be helpful to the practicing engineers dealing with this type of problem.

• 대한전자공학회논문지SD
• /
• 제47권7호
• /
• pp.30-36
• /
• 2010

발달로 인해 칩의 집적도가 향상되고, 그에 따라 칩 내의 전류밀도가 증가하게 되었다. 이는 칩의 온도가 상승하는 효과를 가져오게 되고, 또한 거리에 따른 온도의 변화를 증가시키는 요인이 된다. 본 논문은 칩 내의 온도의 기울기 때문에 발생되는 클락의 스큐를 최소화하기 위한 균형 스큐 트리를 생성하는 기법을 제안한다. 제안한 기법은 Elmore 지연 수식을 이용하여 연결선의 지연을 구하고 DME(Deferred Merge Embedding) 알고리즘을 통해 만들어진 클락 트리를 변형시키면서 최적의 균형 스큐 트리를 찾는다. 제안한 기법의 성능 평가를 위하여 C 언어로 제안된 기법을 구현하였고, 온도의 기울기 때문에 발생한 클락 삽입 지점을 평균 약 54%이하로 수축시킬 수 있다는 것을 시뮬레이션 결과로 보였으며, 스큐가 현저히 낮아지는 것을 확인하였다.

• 공업화학
• /
• 제8권5호
• /
• pp.853-859
• /
• 1997

표면층에 치밀층 구배 구조를 갖는 비대칭 폴리에테르이미드막에 대하여 치밀 구조층의 화학적 개질을 통한 막 형태의 변화와 물/이소프로판올 혼합액의 투과증발 거동을 연구하였다. 치밀 정도는 증발 시간에 의해 조절되었고, 증발 시간이 0분에서 4분으로 증가되었을 때, 투과량은 감소하였고, 선택도는 증가하였다. 또한, 수산화나트륨 용액으로 개질 된 폴리에테르이미드막을 통한 투과증발 거동은, 치밀 표면층의 개질 시간이 증가될수록 선택성은 증가하였고, 투과량은 감소하였다. 전자현미경으로 확인된 형태 변화는 개질 시간의 증가에 따라 치밀 표면층의 density 증가를 보여주었고, 이러한 결과는 위의 관찰들과 일치하였다.