• 한국미생물·생명공학회지
• /
• 제19권4호
• /
• pp.372-379
• /
• 1991

E.coli ATCC 21990의 aminoglycoside-3'-phosphotransferase(APH(3'))의 신속하고 간편한 정량적 방법을 TLC densitometry를 이용하여 확립하였다. APH(3') 반응생산물인 3' 위치에 인산화된 kanamycin B(3'PKMB)는 silica gel plate에서 cnloroform-methanol-method-ammonia water (3:4:3) 전개용매로 반응물에서 분리되었고, 3'PKMB의 양은 ninhydrin으로 발색 후 densitometry로 측정하였다. APH(3')의 densitometric TLC assay는 좋은 정량적 결과와 재현성을 보였고, 3'-PKMB에 대한 감도는 1.56nmol이었으며 많은 시료의 분석이 한번의 실시로 가능하였다. 이 방법은 aminoglycoside 항생제의 불활화 효소 분석에 응용이 가능하리라 여겨진다.

• 분석과학
• /
• 제34권2호
• /
• pp.56-67
• /
• 2021

Due to the difficulty of grading visualized fingerprints with previously known evaluation methods for the comparison of split fingerprints, a preliminary study was performed with the densitometric image analysis (DIA) method as a potential quantitative and supplementary evaluation method. Each image of inked split fingerprints was divided into 4 zones for analysis. Weekly intra- and inter- analysis by two analysts with three whole fingerprints that were constructed by combining inked split fingerprints showed that the average area values and the ranges of difference fluctuation were not significantly different between strong fingerprints and strong-weak pairs, while they were different in weak fingerprints and weak-weak pairs. In the case of weak fingerprints, the exact acquisition of ridges was difficult and this seemed to influence the results. An additional study is needed for the improved reliability using DIA method with weak fingerprints such as 8 zones division rather than 4 zones. In addition, the analysis results performed by several analysts at different times should be used to improve the reliability of the analysis method further. Based on the above result, it can be judged that utilizing the DIA method as a secondary evaluation method of the existing scoring system would be effective with the additional studies especially on weak fingerprints.

• 분석과학
• /
• 제33권4호
• /
• pp.197-207
• /
• 2020

The current comparison methods with scoring systems that are used to compare visualized latent fingerprints (LF) have disadvantages. Evaluators using these methods are prone to make errors and fail to discriminate LFs correctly to notice the differences among those LFs. Therefore, a comparative and quantitative evaluation method that is capable of obtaining more objective and quantitative results is needed. Densitometric image analysis (DIA) is used in other fields as a reliable semi-quantitative comparison method. To apply DIA to LFs, the potential variables that can occur during the DIA process were tested. The visualized ridges of LFs can be compared using the concentration of dots against the background to make it possible to analyze the ridges with DIA. The variables that can be present during the DIA process include the thickness of the analysis line, the number of ridges to be taken, the number of divided zones within each of the fingerprints, and the angles of the analysis line against the ridge lines that were selected. From the analysis of the inked fingerprints and circular lines that are similar to fingerprints, the angle of the analysis lines with the ridge line was the most significant variable. The preliminary test result was applied to the comparison of LFs that were developed with the powder method and then compared with the AFIS analysis. A similar trend was found, and a more detailed and semi-quantitative comparison of the visualized LFs was possible. In the future, it is necessary to check the evaluative ability of the DIA method by analyzing the visualized LFs with other various development methods. However, DIA is currently an option that can be used as an objective comparative evaluation method during fingerprint studies with supplementary role.

• 한국인쇄학회지
• /
• 제27권1호
• /
• pp.15-27
• /
• 2009

Since domestic offset print quality control depends on the experience of persons in charge rather than objective data, the standards from the data are needed for the well-organized quality management of high-quality prints. Based on the ISO standards, now the standard specifications, such as GRACoL 7, SWOP 11, SNAP, G7 in America, and EURO Color, ECI, BVDM in Europe, and Japan Color 2001, Japan Color 2004 in Japan, are employed. There exists KS for domestic standards. However, since it has been directly imported from ISO Standards, there are discrepancies in printing materials and media. Although the quality management of commercial prints has been focused and studied. For this circumstance, standards are needed for the production of prints to meet international standards. This paper aims to find out suitable ways to approach domestic printing standards using densitometric method and colorimetric method. Printing experiments on this study were performed with domestic process color inks(Cyan, Magenta, Yellow, Black) and domestic coated papers, under the same conditions as the actual commercial printing processes. In densitometric method, how to set up the optimal solid print density was studied through three tests such as the ways to match solid print density and print contrast to GRACoL standards respectively, and the way to get the highest contrast. In colorimetric method, how to get solid print density with the minimum color difference between the $CIEL^*a^*b^*$ color specification values in GRACoL standards and the measured color specification values in prints, was studied.

• 한국인쇄학회지
• /
• 제23권2호
• /
• pp.77-92
• /
• 2005

Offset lithography is the most widely used printing process in domestic printing industry, but there are no industry-wide specifications for press control to assure consistent quality across printing plants. As printing becomes more of a commodity and less of an art, it is necessary to develop a print quality specification standard suitable for Korea offset printing field. This study aims to contribute to improving the quality of domestic offset color prints by comparative study on color reproduction properties of 3 kinds of domestic process color ink composed of C(cyan), M(magenta), Y(yellow), and K(black), and of 3 kinds of domestic coated paper, using densitometric color measurement method.

• 분석과학
• /
• 제29권6호
• /
• pp.283-292
• /
• 2016

범죄현장조사에 사용되는 인체에 유해할 수 있는 일반분말에 대한 대체수단으로 천연분말(오징어 먹물분말, 청대분말, 쌀분말)을 이용하여 비 다공성표면(유리, 플라스틱, 타일)상의 잠재지문을 현출(가시화)하였다. 현출된 잠재지문을 Automatic Fingerprint Identification System (AFIS)으로 분석한 특징점의 수를 흑색분말을 사용한 결과 특징점 수와 비교하였으며 또한 객관적이고 계량적인 평가방법의 개발을 위하여 각 분말로 가시화된 지문의 이미지를 농도계 이미지분석(densitometric image analysis)을 이용한 결과 값인 융선 피크의 면적값을 비교하였다. 천연분말들의 현출효과는 표면에 따라 다양하게 나타났다. 일반적으로 오징어 먹물분말은 대부분의 표면에서 좋은 현출을 보였으며 청대분말은 타일표면에서 그리고 쌀분말은 유리표면에서 최고의 현출을 보였다. 그러나 플라스틱 표면은 천연분말에 의한 지문현출이 가장 어려운 표면이었다. Field Emission Scanning Electron Microscope (SEM)를 이용한 이미지 분석에서 융선에 적절한 흡착력을 가지는 조건으로 천연분말 입자의 크기와 형태가 중요한 인자임을 확인할 수 있었다. 비록 기술적인 어려움으로 특징점의 수와 융선 피크의 면적값과의 상관관계를 볼 수는 없었으나 공평하고 객관적인 지문의 평가방법으로 기준 이미지의 사용을 통한 이미지 보정을 통하여 가능하리라고 사료된다. 저가의 저독성 천연분말은 추가적인 실험을 통하여 적절한 잠재지문 현출제로서의 가능성을 보일 것으로 사료된다.

• 분석과학
• /
• 제29권3호
• /
• pp.142-153
• /
• 2016

범죄수사에서 지문인식은 개인 식별을 위한 가장 중요한 기술 중 하나이다. 그러나 다양한 방법으로 각각 현출된 지문을 비교하는 객관적이고 공정한 평가 방법은 존재하지 않는다. 따라서 객관적이고 정량적인 방법의 개발을 위하여 농도계 이미지 분석(densitometric image analysis) 프로그램(CP Atlas 2.0)과 Automated Fingerprint Identification System (AFIS)을 이용하여 다공성 표면에서 현출된 지문을 비교, 평가하였다. 먼저 시료지문 채취 상 최적의 압력과 유류시간 조건을 찾기 위하여 두 가지 조건을 변화시켜 날인을 한 비교적 균일한 품질을 가진 잉크지문(Inked fingerprint)을 분석하였다. AFIS 분석을 통해 얻은 특징점(minutia)수와 이미지 분석을 통해 얻은 융선 peaks의 면적 결과를 계산하여 비교한 결과 1.0 kg.f 의 압력으로 5초(sec.) 동안 유류 한 잉크지문이 육안 상 가장 선명한 융선을 보였으며 가장 많은 수의 특징점 수, 가장 넓은 융선의 peaks 면적을 갖는 것을 확인 할 수 있었다. 또한, 잠재지문 현출에 응용하기 위하여 감열지에 날인 된 잠재재문을 iodine fuming법으로 현출시켜 분석한 결과 1.0 kg.f/5 sec의 조건에서 특징점 수가 가장 많고 융선의 peaks 면적도 가장 넓게 나오는 것을 확인하였다. 추가적으로 프린트 용지에 날인한 잠재지문을 0.5 %와 5 %의 ninhydrin용액으로 현출하여 비교한 결과 2.0 kg.f/5 sec의 조건으로 날인하여 5 %의 ninhydrin용액으로 현출하였을 때 가장 좋은 결과를 갖는 것을 확인하였다. 전반적으로 이미지분석을 통하여 얻은 peaks의 평균면적이 클수록 AFIS를 통해 확인되는 특징점수가 많아진다는 것이 확인되었으며 농도계 이미지 분석을 이용한 지문 평가의 추가적인 연구를 통해 본 방법은 지문 현출 평가에 대한 객관적이고 정량적인 새로운 시험방법이 될 수 있을 것으로 사료된다.

• Journal of Periodontal and Implant Science
• /
• 제37권1호
• /
• pp.137-150
• /
• 2007

CADIA(Computer-assisted densitometric image analysis) method is used to analyze bone density changes around the implants. The usefullness and reproducibility of the method was assessed. We tried to find out if there is any possibility to quantitiate and qualitify peri-implant bone density change as time passes. And we concluded that this newly developed linear analysis is efficient for analyzing peri-implant bone density change non-Invasively. In this study, 2152 machined $Br{\aa}nemark$ fixtures installed from 1994 to 2002 in the department of Periodontics, Dental hospital of College of Dentistry, Yonsei University were included. Of these fixtures 22 radiographically analyzable failed fixtures were used as experimental group, and 22 successful implants placed in the same patient were used as control group. 1. 57 out of 1635 machined $Br{\aa}nemark$ standard and Mk II implants system failed, the survival rate was 96.5%. And 11 out of 517 machined $Br{\aa}nemark$ Mk III and Mk IV implants system failed, the survival rate was 97.9%. Total survival rate was 96.8%. 2. 22 failed implants were used for the analysis, 10 of which failed before prosthetic treatment due to infection and overheating. 12 failed due to overload after prosthetic treatment, 63.6% of which failed during the early phase of functional loading, i, e. before 1 year of loading. 3. Bone density change values around coronal region of the failed implants were $-6.54{\pm}6.35$, middle region were $-3.53{\pm}5.78$, apical region were $-0.75{\pm}10.33$, resulting in average of $-3.71{\pm}8.03$. 4. Bone density change values around coronal region of the successful implants were $4.25{\pm}4.66$, middle region were $6.33{\pm}5.02$, apical region were $9.89{\pm}4.67$, resulting in average of $6.27{\pm}5.29$. 5. There was a statistically significant difference between two groups (p<0.01). In conclusion, the linear analysis method using computer-assisted densitometric image analysis could be a useful method for the analysis of implants, and could be used for future implant researchs.

• 한국가금학회지
• /
• 제16권4호
• /
• pp.201-207
• /
• 1989

본 실험은 우리나라 재래계의 육종 기초 자료를 얻고자 염색체의 형태와 G-, C-banding pattern을 조사하여 보았다. 시료는 성장중인 초기배아를 이용하였고 염색체 분양분석은 현재 Ohio 대학에서 시행하고 있는 방법을 다소 수정하여 행하였다. 실험결과 macrochromosome의 armratio와 centromeric index 그리고 relative length에서 다소 개량종과 차가 있으나 designation에는 차이가 없었다. Densitometric recording에 나타난 graph의 정점은 G-banding에서 1, 2, 3, 4, Z, 그리고 5번의 각 염색체에서 각각 21, 14, 12, 8, 11 그리고 4 개였고, C-banding에서는 各各 16, 13, 9, 9, 9,그리고 4 개였다. 이러한 banding pattern은 분염분석 방법에 따라 더 많이 발현시킬 수 있으리라 생각하며, banding pattern 에 의해서 genetic marker를 시사하기 위해서는 더 많은 연구가 이루어져야 할 것이다.

• 대한세포병리학회지
• /
• 제5권1호
• /
• pp.15-22
• /
• 1994

Cancer of the cervix is the most common malignancy in women in developing countries and the second most common cancer in women throughout the world with approximately 500,000 new cases each year. Prevention of this large number of premature deaths among women is, therefore, a goal worthy of urgent and serious consideration. Due to its high diagnostic disagreement among pathologists and large quantity of specimens, it is necessary to develop an automatic screening system measuring morphologic and densitometric features of the samples. Many research works have been published but most of them used Feulgen stained specimens which are not a usual staining method used in clinics. In this thesis, an automatic cancerous nucleus detection method essential to a screening system with papanicolaou stained specimens called Pap-smear is proposed which employs image processing techniques. It uses edge information to segment objects and morphologic as well as densitometric information to distinguish cancerous nuclei from dirts or normal nuclei. It has produced useful results in our study.