• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.155-168
• /
• 2002

In this paper, some efficient implementation techniques for the multifrontal method, which can be used to compute the Cholesky factor of a symmetric positive definite matrix, are presented. In order to use the cache effect in the cache-based computer architecture, a hybrid method for factorizing a frontal matrix is considered. This hybrid method uses the column Cholesky method and the submatrix Cholesky method alternatively. Experiments show that the hybrid method speeds up the performance of the supernodal multifrontal method by 5%～10%, and it is superior to the Cholesky method in some problems with dense columns or large frontal matrices.

• Earthquakes and Structures
• /
• v.24 no.4
• /
• pp.289-301
• /
• 2023

Developing a competent soil-bridge interaction model for the seismic analysis of piled foundation bridges is of utmost importance for investigating the seismic response and assessing fragility of these lifeline structures. To this end, ground motion histories are deemed necessary at various depths along the piles supporting the bridge. This may be effectively accomplished through time history analysis of a free-field standalone soil column extending from bedrock level to ground surface subjected to an input bedrock motion at its base. A one-dimensional site/ground response analysis (vide one-directional shear wave propagation through the soil column) is hence conducted in the present research accounting for the nonlinear hysteretic behavior of the soil stratum encompassing the bridge piled foundation. Two homogeneous soil profiles atop of bedrock have been considered for comparison purposes, namely, loose and dense sand. Analysis of the standalone soil column has been performed under a set of ten selected actual bedrock ground motions adopting a nonlinear time domain approach in an incremental dynamic analysis framework. Amplified retrieved PGA and maximum soil shear strains have been generally observed at various depths of the soil column when moving away from bedrock towards ground surface especially at large hazards associated with high (input) PGA values assigned at bedrock. This has been accompanied, however, by some attenuation of the amplified PGA values at shallower depths and at ground surface especially for the loose sand soil and particularly for cases with higher seismic hazards associated with large scaling factors of bedrock records.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.369-374
• /
• 2012

Based on the structure feature of a tree, a cylindrical $Ti_2AlC$/graphite layered composite has been fabricated through heat treating a graphite column and six close-matched thin wall $Ti_2AlC$ cylinders bonded with the $Ti_2AlC$ powders at $1300^{\circ}C$ and low oxygen partial pressure. SEM examination reveals that the bond interlayers between cylinders or that between cylinder and column are not fully dense without any crack formation. During the compressive test, the strain of the $Ti_2AlC$/graphite layered composite is about twice higher than that of the monolithic $Ti_2AlC$ ceramic, and the compressive strength of the layered composite is 348 MPa. The layered composite show the noncatastrophic fracture behaviors due to the debonding and shelling off of the layers, which are different from the monolithic $Ti_2AlC$ ceramic. The mechanism of the improved deformation capacity and noncatastrophic failure modes are attributed to the presence of the central soft graphite column and cracks deflection by the bond interlayers.

• Journal of Urban Science
• /
• v.7 no.2
• /
• pp.21-27
• /
• 2018

With the increase of the skyscraper center, the development of large-diameter and high-strength reinforcing bars is being carried out to solve the dense reinforcement. In case of the steel reinforced concrete with a small cross section such as beam-column joints, the development length becomes short when straight bars are used. Therefore, it is possible to solve the problem that the development length becomes short by using the bearing strength of the hooked bar and headed bar. In this study, the exterior beam-column joint test of SD700 hooked bar and headed bar with anchorage length of 20db was conducted to extend the development length limitation of hooked bar and headed bar. As a result of the evaluation of the anchorage strength using the design equation by KCI, the average of the [measured value]/[predicted value] ratio was 1.31 for the hooked reinforcing bars. In the case of headed bars, the average of the [measured value]/[predicted value] ratio was 1.12. In addition, in order to compare the anchorage performance of the hooked bar and the headed bar, the measured values were divided by the square root of the compressive strength of the concrete to compare the anchorage strength. Under the same conditions, the anchorage strength of headed bars was 8.5% higher than the hooked bars.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.9
• /
• pp.3782-3796
• /
• 2020

A three-dimensional (3D) reconstruction is an important research area in computer vision. The ability to detect and match features across multiple views of a scene is a critical initial step. The tracking matrix W obtained from a 3D reconstruction can be applied to structure from motion (SFM) algorithms for 3D modeling. We often fail to generate an acceptable number of features when processing face or medical images because such images typically contain large homogeneous regions with minimal variation in intensity. In this study, we seek to locate sufficient matching points not only in general images but also in face and medical images, where it is difficult to determine the feature points. The algorithm is implemented on an adaptive threshold value, a scale invariant feature transform (SIFT), affine SIFT, speeded up robust features (SURF), and affine SURF. By applying the algorithm to face and general images and studying the geometric errors, we can achieve quasi-dense matching points that satisfy well-functioning geometric constraints. We also demonstrate a 3D reconstruction with a respectable performance by applying a column space fitting algorithm, which is an SFM algorithm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1B
• /
• pp.85-91
• /
• 2012

Permeable Reactive Barriers (PRBs) using zero valent iron (ZVI, $Fe^0$) is a promising technology for in-situ remediation of trichloroethylene (TCE) forming dense non aqueous phase liquid (DNAPL). The objective of this study is to develop an enhanced treatment method of trichloroethylene-contaminated groundwater using ZVI packed bed with direct current (D.C.). A column experiment was performed to investigate degradation efficiency of TCE that was performed in three different combination of control (only sand), ZVI column (ZVI:sand, packing ratio 1:2(v/v)) and bipolar column (ZVI:sand=1:2(v/v) with electric current) in the test columns. As the results of this study, the degradation efficiency of TCE was improved with simultaneous application of both bipolar column compared to that used ZVI column. Because ZVI particles are isolated and individual particles act like small electrodes. In this experiment, it was indicated a basic material for application of bipolar packed bed as electro-PRBs that was effective degradation of TCE.

• Applied Microscopy
• /
• v.41 no.2
• /
• pp.99-107
• /
• 2011

Light microscope, and scanning and transmission electron microscopy were used to investigate the fine structure of sperm of the Korea squirrel, Tamias sibiricus. The sperm head of T. sibiricus was paddle in shape. The total length of T. sibiricus sperm was 67.8 ${\mu}m$. The length of sperm head was 7.8 ${\mu}m$, and the tail (60.0 ${\mu}m$) was consisted of four major segments: the neck (1.0 ${\mu}m$), middle (8.0 ${\mu}m$), principal (48.5 ${\mu}m$) and end piece (2.5 ${\mu}m$), respectively. Especially, the length of the middle piece is short, and end piece was very shorter than those of other rodents. The post-nuclear cap was occupied about a fifth of nucleus. The equatorial segment is located between the post-nuclear cap segment and acrosomal cap on the nuclear surface. Nine segmented columns were surrounded by the mitochondria, and numbers of gyres of mitochondria were 26. One segmented column was consisted ten to twelve knobs, and each of segmented column in the neck region connected with the nine outer dense fiber in the middle piece. Numerous satellite-like fibers were scattered around the segmented columns. Nos. 1, 5 and 6 of the outer dense fibers in the middle piece were larger than the others. A fibrous sheath and longitudinal column of the principal piece were in evidence, but the fibrous sheath and longitudinal column was not seen at the end piece. In conclusion, the structural features of sperm head and tail may be useful information to patterns of sperm evolution and classification of species.

• Journal of Plant Biology
• /
• v.35 no.2
• /
• pp.99-106
• /
• 1992

The endosperm protein, vicilin, of ginseng (Panax ginseng C.A. Meyer) was purified by ammonium sulfate precipitaion, gel permeation and ion exchange column chromatography. Vicilin is a glycoprotein composed of 2 subunits with molecular masses of 55,000 (large subunit) and 44,000 (small subunit). The anti-vicilin antibody was raised in rabbit, and purified by DEAE Affi-Gel Blue affinity chromatography. The endosperm cells of the seed were reacted with this anti-vicilin antibody and colloidal gold conjugated secondary antibody. Gold particles were labelled on the elaborating granules of Golgi complex, electron-dense granules and protein bodies in the endosperm cells. These results indicated that the vicilin, which was synthesized in rough endoplasmic reticulum and transported to Golgi, was elaborated in saccules of the Golgi and then transported into protein bodies by electron-dense granules.anules.

• Korean Journal of Ecology and Environment
• /
• v.33 no.2 s.90
• /
• pp.119-127
• /
• 2000

Diurnal vertical distribution of phytoplankton and physico-chemical characteristics were studied in Kongsan reservoir during summer 1996, when a dense algal bloom, consisting mostly of Microcystis, developed. The maximum biomass was observed near the surface layer, where Microcystis aeruginosa dominated and declined gradually with depth. The dense population of blue-green alga M. aeruginosa acumulated near the surface layer during the early morning and evening, but abruptly decreased after sunrise. The most of biomass was distributed above 5 m of the water column and diurnal changes of biomass clearly appeared at the surface but was not showed upward and downward migration. The results of this study suggest that diurnal variation of biomass at the surface layer was affected by horizontal migration with wind.

• Geomechanics and Engineering
• /
• v.15 no.1
• /
• pp.695-710
• /
• 2018

Formation of a soil plug in an open-ended pile is a very important factor in determining the pile behavior both during driving and during static loading. The degree of soil plugging can be represented by the incremental filling ratio (IFR) which is defined as the change in the plug length to the change of the pile embedment length. The experimental tests carried out in this research contain 138 tests that are divided as follows: 36 tests for single pile, 36 tests for pile group ($2{\times}1$), 36 tests for pile group ($2{\times}2$) and 30 pile group ($2{\times}3$). All tubular piles were tested using the poorly graded sand from the city of Karbala in Iraq. The sand was prepared at three different densities using a raining technique. Different parameters are considered such as method of installation, relative density, removal of soil plug with respect to length of plug and pile length to diameter ratio. The soil plug is removed using a new device which is manufactured to remove the soil column inside open pipe piles group installed using driving and pressing device. The principle of soil plug removal depends on suction of sand inside the pile. It was concluded that the incremental filling ratio (IFR) is changed with the changing of soil state and method of installation. For driven pipe pile group, the average IFR for piles in loose is 18% and 19.5% for L/D=12 and 15, respectively, while the average of IFR for driven piles in dense sand is 30% and 20% for L/D=12 and L/D=15 respectively. For pressed method of pile installation, the average IFR for group is zero for loose and medium sand and about 5% for dense sand. The group capacity increases with the increase of IFR. For driven pile with length of 450 mm, the average IFR % is about 30.3% in dense sand, 14% in medium and 18.3% for loose sand while when the length of pile is 300 mm, the percentage equals to 20%, 17% and 19.5%, respectively.