• 제목/요약/키워드: dense

검색결과 4,031건 처리시간 0.03초

The Effect of a Sol-gel Formed TiO2 Blocking Layer on the Efficiency of Dye-sensitized Solar Cells

  • Cho, Tae-Yeon;Yoon, Soon-Gil;Sekhon, S.S.;Kang, Man-Gu;Han, Chi-Hwan
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권10호
    • /
    • pp.3629-3633
    • /
    • 2011
  • The effect of a dense $TiO_2$ blocking layer prepared using the sol-gel method on the performance of dye-sensitized solar cells was studied. The blocking layer formed directly on the working electrode, separated it from the electrolyte, and prevented the back transfer of electrons from the electrode to the electrolyte. The dyesensitized solar cells were prepared with a working electrode of fluorine-doped tin oxide glass coated with a blocking layer of dense $TiO_2$, a dye-attached mesoporous $TiO_2$ film, and a nano-gel electrolyte, and a counter electrode of Pt-deposited FTO glass. The gel processing conditions and heat treatment temperature for blocking layer formation affected the morphology and performance of the cells, and their optimal values were determined. The introduction of the blocking layer increased the conversion efficiency of the cell by 7.37% for the cell without a blocking layer to 8.55% for the cell with a dense $TiO_2$ blocking layer, under standard illumination conditions. The short-circuit current density ($J_{sc}$) and open-circuit voltage ($V_{oc}$) also were increased by the addition of a dense $TiO_2$ blocking layer.

디지털 유방촬영술에서 BI-RADS의 구분에 따른 알고리즘별 영상의 융복합적 평가 (Convergence of the Image Evaluation by BI-RADS Classification in Accordance with Algorithms in DR Mammography)

  • 이미화
    • 디지털융복합연구
    • /
    • 제13권9호
    • /
    • pp.489-495
    • /
    • 2015
  • BI-RADS의 구분에 따라 Algorithm의 변화로 영상의 질을 개선하는 기법을 이용하여 시각적 가시화의 차이를 일치도와 민감도로 평가하였다. 유방촬영을 시행한 172명을 대상으로 유방촬영의 판독소견과 자료 체계의 신뢰도를 평가하였다. Category 5단계(C0,C1,C2,C3,C4), 유방 실질 함유량 4단계(Fatty, Fibroglandular, Heterogeneous nodular, Diffuse dense), 병변 3종류(석회화, 결절, 종괴)로 분류하여 TE와 PV의 신뢰도를 평가하고, 민감도와 진단의 일치도, 정확도를 평가함으로 다방면의 융복합적 분석을 하였다. TE보다 PV가 병변의 신뢰도와 민감도와 정확도가 높았다. 유방 실질 함유량에 따른 평가에서 정확도는 PV가 높았다. TE에서는 Fatty는 모두에서, Fibroglandular는 종괴와 석회화가, Diffuse dense는 결절과 석회화가 구별이 용이하였다. PV에서는 Fatty는 모두에서, Fibroglandular는 결절, Heterogeneous nodular은 결절과 종괴, Diffuse dense는 결절과 석회화가 구별이 용이하였다. 민감도는 결절은 Fatty, Fibroglandular, Heterogeneous nodular에서 TE가 더 민감했고, 종괴에서는 Heterogeneous nodular, Diffuse dense에서 TE가 더 민감했으며, 석회화에서는 모두에서 TE가 더 민감하였다. 이에 Algorithm 기법을 적절히 변화시켜 활용한다면 진단과 판독에 정확성을 높일 것이라 사료된다.

진공 슬러리 담금 코팅 공정에 의한 고체 산화물 연료전지용 박막 전해질막 제조에 관한 연구 (Fabrication Of Thin Electrolyte Layer For Solid Oxide Fuel Cell by Vacuum Slurry Dip-coating Process)

  • 손희정;임탁형;이승복;신동열;송락현;김성현
    • 한국수소및신에너지학회논문집
    • /
    • 제17권2호
    • /
    • pp.204-211
    • /
    • 2006
  • The electrolyte in the solid oxide fuel cell must be dense enough to avoid gas leakage and thin enough to reduce the ohmic resistance. In order to manufacture the thin and dense electrolyte layer, 8 mol% $Y_2O_3$ stabilized-$ZrO_2$ (8YSZ) electrolyte layers were coated on the porous tubular substrate by the novel vacuum slurry dip-coating process. The effects of the slurry concentration, presintering temperature, and vacuum pressure on the thickness and the gas permeability of the coated electrolyte layers have been examined in the vacuum slurry coating process. The vacuum-coated electrolyte layers showed very low gas permeabilities and had thin thicknesses. The single cell with the vacuum-coated electrolyte layer indicated a good performance of $495\;mW/cm^2$, 0.7 V at $700^{\circ}C$. The experimental results show that the vacuum dip-coating process is an effective method to fabricate dense thin film on the porous tubular substrate.

Effects of specific monoclonal antibodies to dense granular proteins on the invasion of Toxoplasma gondii in vitro and in vivo

  • Cha, Dong-Yeob;Song, In-Kwan;Lee, Gye-Sung;Hwang, Ok-Sun;Noh, HyungJun;Yeo, Seung-Dong;Shin, Dae-Whan;Lee, Young-Ha
    • Parasites, Hosts and Diseases
    • /
    • 제39권3호
    • /
    • pp.233-240
    • /
    • 2001
  • Although some reports have been published on the protective effect of antibodies to Toxoplasma gondii surface membrane proteins, few address the inhibitory activity of antibodies to dense granular proteins (GRA proteins) . Therefore, we performed a series of experiments to evaluate the inhibitory effects of monoclonal antibodies (mAbs) to GRA proteins (GRA2, 28 kDa; GRA6, 32 kDa) and surface membrane protein (SAGI, 30 kDa) on the invasion of T. gondii tachyzoites. Passive immunization of mice with one of three mAbs following challenge with a lethal dose of tachyzoites significantly increased survival compared with results for mice treated with control ascites. The survival times of mice challenged with tachyzoties pretreated with anti-GRA6 or anti-SAG 1 mAb were significantly increased. Mice that received tachyzoties pretreated with both mAb and complement had longer survival times than those that received tachyzoites pretreated with mAb alone. Invasion of tachyzoites into fibroblasts and macrophages was significantly inhibited in the anti-GRA2, anti-GRA6 or anti-SAG 1 mAb pretreated group. Pretreatment with mAb and complement inhibited invasion of tachyzoites in both fibroblasts and macrophages. These results suggest that specific antibodies to dense-granule molecules may be useful for controlling infection with T. gondii.

  • PDF

Small- and large-scale analysis of bearing capacity and load-settlement behavior of rock-soil slopes reinforced with geogrid-box method

  • Moradi, Gholam;Abdolmaleki, Arvin;Soltani, Parham
    • Geomechanics and Engineering
    • /
    • 제18권3호
    • /
    • pp.315-328
    • /
    • 2019
  • This paper presents an investigation on bearing capacity, load-settlement behavior and safety factor of rock-soil slopes reinforced using geogrid-box method (GBM). To this end, small-scale laboratory studies were carried out to study the load-settlement response of a circular footing resting on unreinforced and reinforced rock-soil slopes. Several parameters including unit weight of rock-soil materials (loose- and dense-packing modes), slope height, location of footing relative to the slope crest, and geogrid tensile strength were studied. A series of finite element analysis were conducted using ABAQUS software to predict the bearing capacity behavior of slopes. Limit equilibrium and finite element analysis were also performed using commercially available software SLIDE and ABAQUS, respectively to calculate the safety factor. It was found that stabilization of rock-soil slopes using GBM significantly improves the bearing capacity and settlement behavior of slopes. It was established that, the displacement contours in the dense-packing mode distribute in a broader and deeper area as compared with the loose-packing mode, which results in higher ultimate bearing load. Moreover, it was found that in the loose-packing mode an increase in the vertical pressure load is accompanied with an increase in the soil settlement, while in the dense-packing mode the load-settlement curves show a pronounced peak. Comparison of bearing capacity ratios for the dense- and loose-packing modes demonstrated that the maximum benefit of GBM is achieved for rock-soil slopes in loose-packing mode. It was also found that by increasing the slope height, both the initial stiffness and the bearing load decreases. The results indicated a significant increase in the ultimate bearing load as the distance of the footing to the slope crest increases. For all the cases, a good agreement between the laboratory and numerical results was observed.

초고밀도 네트워크에서 상향링크 성능향상을 위한 유동적 채널할당 연구 (A Study on Dynamic Channel Assignment to Increase Uplink Performance in Ultra Dense Networks)

  • 김세진
    • 인터넷정보학회논문지
    • /
    • 제23권5호
    • /
    • pp.25-31
    • /
    • 2022
  • 초고밀도 네트워크(Ultra dense network, UDN)는 5G 이동통신 시스템에서 많은 수의 스몰셀 기지국(Small-cell access point, SAP)이 매크로셀의 서비스 영역에 배치되기 때문에 매크로 단말(Macro user equipment, MUE)이 수신하는 간섭량이 증가하여 시스템 용량이 크게 감소한다. 따라서, 본 논문은 UDN에서 SAP의 수가 증가하여도 MUE의 성능을 보장하기 위한 상향링크 유동적 채널할당 방법을 제안한다. 제안하는 유동적 채널할당 방법은 간섭량이 높은 MUE와 동일한 부채널을 사용하지 않도록 SAP들이 사용하는 부채널을 제어하여 MUE의 신호 대 간섭 잡음비(Signal to interference and noise ratio)를 주어진 임계값 이상으로 보장하는 것을 목표한다. 시뮬레이션을 통해 제안하는 유동적 채널할당 방법이 다른 방법들과 비교해 스몰셀 사용자 단말의 성능은 크게 감소되지 않으면서 MUE의 평균 전송 용량이 향상됨을 보인다.

명함 이미지 회전 판단을 위한 딥러닝 모델 비교 (Comparison of Deep Learning Models for Judging Business Card Image Rotation)

  • 경지훈
    • 한국정보통신학회논문지
    • /
    • 제27권1호
    • /
    • pp.34-40
    • /
    • 2023
  • 고객이 온라인으로 요청한 명함을 자동으로 명함을 인쇄하는 스마트 명함 인쇄 시스템이 활성화되고 있다. 이때, 문제는 고객이 시스템에 제출한 명함이 비정상일 수 있다는 것이다. 본 논문에서는 인공 지능 기술을 도입하여 명함의 이미지가 비정상적으로 회전됐는지 여부를 판정하는 문제를 다룬다. 명함은 0도, 90도, 180도, 270도 회전한다고 가정하였다. 특별한 인공신경망을 설계하지 않고 기존의 VGG, ResNet, DenseNet 인공신경망을 적용하여 실험하였는데 모든 신경망이 97% 정도의 정확도로 이미지 회전을 분별할 수 있었다. DenseNet161은 97.9%의 정확도를 보였고 ResNet34도 97.2%의 정밀도를 보였다. 이는 문제가 단순할 경우, 복잡한 인공신경망이 아니어도 충분히 좋은 결과를 낼 수 있음을 시사한다.

다양한 다층 지반모형에 대한 지진동 증폭 (Earthquake Amplification for Various Multi-Layer Ground Models)

  • 정수근;김호연;김대현
    • 지질공학
    • /
    • 제33권2호
    • /
    • pp.293-305
    • /
    • 2023
  • 지진이 발생할 때 대한 지진동 증폭 현상을 확인하기 위해 1g 진동대와 연성토조(Laminar Shear Box, LSB)를 이용하여 모형지반을 조성하였고, 3가지 모델에 대하여 지진동 증폭현상에 대하여 확인하였다. 3가지의 모형지반을 선정하였으며 모든 모형지반에서 조밀한 층과 느슨한 층으로 나누었고, 지반모형의 경우는 다층 수평지반, 다층 제방지반, 다층 분지지반모형으로 선정하였다. 각 지반모형을 제작하며 가속도계 매설을 진행하였으며, 인공지진파, Sinesweep파와 Sine 10 Hz의 지진파를 통하여 증폭현상을 확인하였다. 최대지반가속도(Peak ground acclelration, PGA)와 응답스펙트럼 가속도(Spectrum acceleration, SA)를 통해 지진동 증폭현상을 확인하였다. 수평 다층지반에서 조밀한 지반을 통과 후 느슨한 지반에서 가속도 증폭이 조밀한 지반에 비해 크게 발생하는 것을 확인할 수 있었으며, 다른 두 모형지반에서는 층의 경계면을 통과 후 점차 중심부에서 가속도 증폭이 더 크게 발생하는 것을 확인할 수 있었다.

공동연구 특성을 고려한 연구자 유형 구분에 대한 연구 (A Study on Categorizing Researcher Types Considering the Characteristics of Research Collaboration)

  • 이재윤
    • 정보관리학회지
    • /
    • 제40권2호
    • /
    • pp.59-80
    • /
    • 2023
  • 기존의 연구자 유형 구분 모델은 대부분 연구성과 지표를 활용해왔다. 이 연구에서는 인용 영향력이 공동연구와 관련이 있다는 점을 감안하여 인용 데이터를 활용하지 않고 공동연구 지표만으로 연구자 유형을 분석하는 새로운 방법을 모색해보았다. 공동연구 패턴과 공동연구 범위를 기준으로 연구자를 Sparse & Wide (SW) 유형, Dense & Wide (DW) 유형, Dense & Narrow (DN) 유형, Sparse & Narrow (SN) 유형의 4가지로 구분하는 모델을 제안하였다. 제안된 모델을 양자계측 분야에 적용해본 결과, 구분된 연구자 유형별로 인용지표와 공저 네트워크 지표에 차이가 있음이 통계적으로 검증되었다. 이 연구에서 제시한 공동연구 특성에 따른 연구자 유형 구분 모델은 인용정보를 필요로 하지 않으므로 연구관리 정책과 연구지원서비스 측면에서 폭넓게 활용할 수 있을 것으로 기대된다.

Restoring Turbulent Images Based on an Adaptive Feature-fusion Multi-input-Multi-output Dense U-shaped Network

  • Haiqiang Qian;Leihong Zhang;Dawei Zhang;Kaimin Wang
    • Current Optics and Photonics
    • /
    • 제8권3호
    • /
    • pp.215-224
    • /
    • 2024
  • In medium- and long-range optical imaging systems, atmospheric turbulence causes blurring and distortion of images, resulting in loss of image information. An image-restoration method based on an adaptive feature-fusion multi-input-multi-output (MIMO) dense U-shaped network (Unet) is proposed, to restore a single image degraded by atmospheric turbulence. The network's model is based on the MIMO-Unet framework and incorporates patch-embedding shallow-convolution modules. These modules help in extracting shallow features of images and facilitate the processing of the multi-input dense encoding modules that follow. The combination of these modules improves the model's ability to analyze and extract features effectively. An asymmetric feature-fusion module is utilized to combine encoded features at varying scales, facilitating the feature reconstruction of the subsequent multi-output decoding modules for restoration of turbulence-degraded images. Based on experimental results, the adaptive feature-fusion MIMO dense U-shaped network outperforms traditional restoration methods, CMFNet network models, and standard MIMO-Unet network models, in terms of image-quality restoration. It effectively minimizes geometric deformation and blurring of images.