• JOURNAL OF ELECTRICAL WORLD
• /
• no.3 s.135
• /
• pp.6-11
• /
• 1988

• Journal of Agricultural Extension & Community Development
• /
• v.5 no.1
• /
• pp.79-91
• /
• 1998

This study investigated and summarized the history of peasant movement which had been done by various peasant associations Yesan, Hongsong, and Tangjin from the beginning of Korean Catholic Peasant Movement from 1970 to 1995. First of all, we classified all the peasant movements(Yesan ; 120 times, Hongsong; 113 times and Tangjin; 107 times / total; 340 times) into 5 categories composed of movement time, movement type, movement method, the number of participators, and the movement subjects(issues). The frequency of peasant movement from 1990 to 1995, occupied 65.6%, which shows that the peasant movement was the most active during the time. The frequency of movement type, were we could find out, self-dependence type(62.9%), resistance type(15.6%) and request type(21.5%). The active way like congregation, demonstration, sit-in, rice file up struggle occupied 28.8% and it got the first place in movement way. In the movement subject category, the construction of organizations and solidarity activity amounted to 37.8% and democratization item(the union democratization and the social democratization related peasant) covered 16.8%. The 98 times of peasant movement were done in the active ways such as congregation and demonstration. However we cannot find these active ways in 1970s. In 1980s, the frequency of each item (congregation, demonstration, publicity and propaganda) was 28 times. But in 1990s, the frequency of congregation, or demonstration was higher than the others. The number of participators in peasant movement increased during 1980s∼1990s. The movement of which participators were 100∼499 was 32 times in 1980s and 70 times in 1990s each time. Such large scale movement amounted to over 30%. Furthermore, the large scale movement in which over 500 people participated amounted to 12 times in 1990s.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.479-482
• /
• 2008

Since late of 2000, KIER has developed a novel pyrolysis process for production of fuel oils from polymer wastes. It could have been possible due to large-scale funding of the Resource Recycling R&D Center. The target was to develop an uncatalyzed, continuous and automatic process producing oils that can be used as a fuel for small-scale industrial boilers. The process development has proceeded in three stages bench-scale unit, pilot plant and demonstration plant. As a result, the demonstration plant having capacity of 3,000 tons/year has been constructed and is currently under test operation for optimization of operation conditions. The process consisted of four parts ; feeding system, cracking reactor, refining system and others. Raw materials were pretreated via shredding and classifying to remove minerals, water, etc. There were 3 kind of products, oils(80%), gas(15%), carbonic residue(5%). The main products i.e. oils were gasoline and diesel. The calorific value of gas has been found to be about 18,000kcal/$m^3$ which is similar to petroleum gas and shows that it could be used as a process fuel. Key technologies adopted in the process are 1) Recirculation of feed for rapid melting and enhancement of fluidity for automatic control of system, 2) Tubular reactor specially-designed for heavy heat flux and prevention of coking, 3)Recirculation of heavy fraction for prevention of wax formation, and 4) continuous removal & re-reaction of sludge for high yield of main product (oil) and minimization of residue. The advantages of the process are full automation, continuous operation, no requirement of catalyst, minimization of coking and sludge problems, maximizing the product(fuel oil) yield and purity, low initial investment and operation costs and environment- friendly process. In this presentation, background of pyrolysis technology development, the details of KIER pyrolysis process flow, key technologies and the performances of the process will be discussed in detail.

• Journal of Digital Contents Society
• /
• v.11 no.2
• /
• pp.129-134
• /
• 2010

Today's elementary schools emphasize practice- and learner-based computer courses. In this research, we found solutions to the above issues by adapting a demonstration/practice teaching method led by multiple teaching assistants, expanding lessons tailored to each student's own level. We chose fourth graders from three classes at Elementary School as the subject for this research. Through this research, we have analyzed the students' study results, self-efficacy, response and interest in the computer courses by examining three groups of students: the first group led by a teacher's demonstration and practice, the second group by a teaching assistant's demonstration and practice, and the last by multiple teaching assistants' demonstration and practice. As a result, we were able to show that a computer course taught by multiple teaching assistants will help not only induce an interest and motive for a mutual learning environment among the students, but also bring positive effects on the study results and self-efficacy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1171-1177
• /
• 2014

An electromagnetic shielding doorset must satisfy requirements associated with both mechanical strength/durability and electromagnetic shielding. Among the primary components of the doorset, a finger strip-a leaftype spring normally made of beryllium copper-is a core part to shield electromagnetic waves as well as to endure repetitive dry sliding friction. This study presented a reliability demonstration test method for the doorset system and, by a simple and simultaneous implementation, of the replacement interval of the finger strip. A rigorous evaluation for the qualification of maintenance or replacement interval is included in the reliability demonstration test of any series system that holds critical maintenance sub-units.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.567-575
• /
• 2014

This paper suggests an installation procedure of a smart skin prototype into an aircraft, flight demonstration test procedures and test results. Four communication and navigation antennas are embedded into one Conformal Load-bearing Antenna Structure(CLAS). Log periodic patch type antenna was designed as a multi-band antenna to cover four antenna frequency bands. The requirements of CLAS were verified by ground tests before aircraft installation. A CLAS speed-brake was installed into KT-1 aircraft and performances of dual antennas were verified as multi-antenna tests on the ground. Electromagnetic compatibility tests were conducted to check compatibility between the CLAS and all existing equipments. Flight demonstration tests were conducted by one sortie of flight test for one antenna. The activeness and continuity of communication and navigation signal during the flight, null area of antenna signal along the circling flight were monitored. The embedded antennas worked better than expected during four sorties of flight tests.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.317-323
• /
• 2010

The manual ultrasonic examination for the nuclear power plant piping welds has been demonstrated by using KPD(Korean Performance Demonstration) generic procedure. For automated ultrasonic examination, there is no generic procedure and it should be qualified by using applicable automated equipment. Until now, most of qualified procedures used pulse-echo technique and there is no qualified procedure using phased array technique. In this study, data acquisition and analysis software were developed and phased-array transducer and wedge were designed to implement phased array technique for nuclear power plant in-service inspection. The developed procedure are qualified for performance demonstration for the flaw detection, length sizing and depth sizing. The qualified procedure will be applied for the field examination in the nuclear power plant piping weld inspection.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.5
• /
• pp.559-571
• /
• 2012

Dimethyl ether (DME) is a new clean fuel as an environmentally-benign energy resource. DME can be manufactured from various energy sources including natural gas, coal, and biomass. In addition to its environmentally friendly properties, DME has similar characteristics to those of LPG. The aim of this article is to represent the development of new DME process with KOGAS's own technologies. KOGAS has investigated and developed new innovative DME synthesis process from synthesis gas in gaseous phase fixed bed reactor. DME has been traditionally produced by the dehydration of methanol which is produced from syngas, a product of natural gas reforming. This traditional process is thus called the two-step method of preparing DME. However, DME can also be manufactured directly from syngas (single-step). The single-step method needs only one reactor for the synthesis of DME, instead of two for the two-step process. It can also alleviate the thermodynamic limitations associated with the synthesis of methanol, by converting the produced methanol into DME, thereby potentially enhancing the overall conversion of syngas into DME. KOGAS had launched the 10 ton/day DME demonstration plant project in 2004 at Incheon KOGAS LNG terminal. In the mid of 2008, KOGAS had finished the construction of this plant and has successively finished the demonstration plant operation. And since 2008, we have established the basic design of commercial plant which can produce 3,000 ton/day DME.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.5
• /
• pp.1350-1354
• /
• 2006

The purpose of this study is to refort the effect of oriental demonstration treatments for the incontinence of urine and stool by cerebrovascular disease. He was treated with herbal medication, acupunture, moxibustion and physical therapy. Through oriental demonstration treatments, Improvement in incontinence of urine and stool by cerebrovascular disease, therefore reported here. The study suggests that therapeutic value of oriental demonstration treatments for the incontinence of urine and stool by cerebrovascular disease will De higher if more clinical studies and researching more cases are accomplished.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.378-383
• /
• 2004

The Korean Performance Demonstration(KPD) System for the ultrasonic testing personnel, equipments and procedures applicable to the Class 1 and 2 piping examination for nuclear power plant in Korea has been established. A round robin test was conducted in order to compare the examination results by the method of Performance Demonstration(PD) with the traditional dB-drop method. The round robin test shows that the reliability of the PD method is better than that of the dB-drop method. As a result, adoption of the PD method to the in-service inspection of the nuclear power plants will improve the reliability of the ultrasonic test results.