• 한국건설관리학회논문집
• /
• 제11권3호
• /
• pp.13-22
• /
• 2010

노후 공동주택의 리모델링 공사 수행 현황을 살펴보면, 공동주택의 신축공사와는 달리 철거공사라는 새로운 공종이 추가 된다. 이러한 철거공사는 리모델링 공사를 구성하는 다양한 공종 중에서 공사 기간을 좌우하는 주요 공종에 해당하나, 실제 공사수행 방법은 기존의 일반 건축공사 철거형태와 거의 동일하게 이루어지고 있다. 즉, 폐자재의 재활용 등을 통한 자원의 낭비 및 환경파괴 등을 최소화 할 수 있는 리모델링 공사의 특성을 고려하지 않고, 단순 생산성만을 강조한 기존철거공사의 수행 방법을 그대로 사용하고 있는 실정이다. 따라서 리모델링 공사의 특성을 반영한 철거공사의 프로세스 정립이 필요하며, 더불어 정립된 프로세스를 구성하는 단위 작업의 시공성을 평가하여 향후개선을 위한 방안이 마련되어야 한다. 본 연구는 선행연구에서 정립한 리모델링 공사의 철거 프로세스 및 단위작업(이하 '신규방식'이라함)과 기존 일반 건축공사의 철거공사 수행 방식(이하 '기존방식'이라함)의 비교를 통한 신규방식의 시공성 측면의 개선효과를 평가하고자 한다. 이를 위해 전문가 면담을 통한 철거공사의 시공성을 측정할 수 있는 주요요인을 도출한 후, 이를 근간으로 공가(空家)상태인 시영아파트의 두개 동에 신규방식과 기존방식의 비교실험을 통한 시공성의 개선 효과를 분석하였다.

• 한국BIM학회 논문집
• /
• 제12권2호
• /
• pp.26-39
• /
• 2022

The purpose of this study is to establish a novel system for on-site management of construction and demolition waste. Construction waste has always been one of largest waste in the world and has long lacked an effective management system. Although various countries have planned the disposal of waste at the political level, the real-time and effective management of construction sites has not been mentioned. Especially in China, the continuous development of the construction industry also generates a large amount of waste, and China is not prepared for a large amount of construction waste. In order to alleviate the huge impact of construction waste on society and the environment, this study proposes a waste management method that combines Building Information Modeling technology and Radio Frequency Identification technology. Through this research, by using information technology to manage the generation and discharge of construction waste, and record the amount and information of waste generation, also improve the management method of construction waste.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.797-800
• /
• 2008

프리믹스 콘크리트 숏크리트는 숏크리트 관련 재료를 미리 포장배송하므로써 시공성, 품질관리 및 경제성을 크게 향상시킬 수 있다. 본 연구에서는 경사구조물에 대한 보수보강 시 열화부를 Hydro-demolition에 의해 제거한 후 인력타설 및 장비 접근이 어려운 경사구조물에 대하여 숏크리트를 적용함으로써 경사구조물의 내구성능 회복과 기존구조물의 지속적인 공용성을 확보하고자 한다. 본 연구에서는 개발된 건식 프리믹스 숏크리트를 사용하여 실제 현장에서 적용함으로써 공법의 적용가능성 및 성능을 종합적으로 평가하는데 그 목적이 있다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.743-746
• /
• 2007

현재 국내에서는 많은 경제성장과 생활여건의 개선에 따라 기존주택의 재건축과 재개발이 증가하고 있다. 이에 따라 국내에서 발생하는 폐기물중 건설폐기물이 차지하는 비중은 점점 더 커져가고 있다. 따라서 정부나 민간에서는 건설폐기물의 발생량을 줄이기 위해 많은 노력을 하고 있다. 그러나 건설폐기물의 발생량을 정확히 예측하고 관리하기 위한 시스템의 개발에 대한 노력은 거의 없는 실정이다. 폐기물의 발생량을 예측하기 위한 기준의 미비로 인해 많은 사회적비용이 발생하고 있다. 따라서 본 연구에서는 공동주택을 대상으로 건설폐기물의 발생량을 쉽게 예측할 수 있는 방안을 제시한다. 그 방법으로는 원단위 할용, CAD도면의 활용, 3D object의 활용과 같이 현장여건에 따라 적절한 방법을 선택하여 적용할 수 있도록 하였다. 이 모듈은 사용자의 사용 목적에 따라 개별 모듈별로 사용하는 것이 가능하도록 구성하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.23-26
• /
• 2007

In this study, recently it is urgently required that demolition waste concrete has to be recycled on the construction because urban development is accelerated and redevelopment project is rapidly expanded, production quantity of construction and demolition waste concrete is being increased. On the other hand, it has to be solved urgently the unbalance of demand and supply about the fine aggregate because the sea sand is restricted by exhaustion of river sand and intensification of environment influence evaluation. Therefore, the purpose of the study was to show the performance of the apparatus developed by the study and to propose the direction of the optimum operating conditions by having an experimental and positive evaluation about quality of recycled sand produced to develop a separating and selecting device of impurities for recycling of construction wastes which can have a bigger improvement of economical efficiency, productivity, environmental property and quality through a basic property of matter of recycled sand by each operating condition of sand flux in comparison with the existing production system of recycled sand.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.107-110
• /
• 2006

In this study, recently it is urgently required that recycle promotion of construction and demolition waste concrete because urban development is accelerated and redevelopment project is rapidly expanded, production quantity of construction and demolition waste concrete is being increased. On the other hand, it is urgently required that problem solution of demand and supply unbalance of fine aggregate because the sea sand is restricted by exhaustion of river sand and intensification of environment influence evaluation. Therefore, it tries to conform in time necessity, there is the objective of this study to provide the fundamental data about the re-application as the comparison and analysis the quality present condition for the recycled fine aggregate in the inside and outside of the country. At the same time it will be able to improve the quality of the recycled fine aggregate waste as investigating the physical nature and a quality present condition of the recycled fine aggregate from construction waste.

• KIEAE Journal
• /
• 제11권4호
• /
• pp.87-94
• /
• 2011

This study was suggested to develop sustainable durability design system and proposed the plan to evaluate design conditions that meet the intended service life and $LCCO_{2}$ reduction level of reinforced concrete structure easily from the early design stage. For that the W/B and covering depth of the concrete structure were calculated through calculation of service life based on standard specification expression and the quantitative reduction rate of the vertical member of reinforced concrete structure by the calculated W/B was applied. Life cycle of building classified into construction stage, operation stage, maintenance stage, and demolition/disposal stage and the method of $CO_{2}$ evaluation of each stage was proposed. For construction stage, the major construction materials that take up over 80% $CO_{2}$ emitting during building construction were selected and the $CO_{2}$ evaluation method for 5 standard apartment houses was proposed. Also, for operation stage, $CO_{2}$ emission was calculated through calculation of heating load by energy efficiency rating certification system. For maintenance stage, $CO_{2}$ emission was calculated using concept of re-construction by life and for demolition/disposal stage was calculated with the use of construction standard estimate. As a result of the case study by such evaluation methods, 80 years of service life and 17 specifications of sustainable durability design that meet the 40% intended $LCCO_{2}$ reduction level were deduced. The Maximum $LCCO_{2}$ reduction rate was analyzed by 47.2%.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.321-327
• /
• 2017

China is experiencing the urbanization at an unprecedented speed and scale in human history. The continuing growth of China's big cities, both in city land and population, has already led to great challenges in China's urban planning and construction activities, such as the continuous increase of construction and demolition (C&D) waste. Therefore, how to characterize cities' construction activities, particularly dynamically quantify the flows of building materials and construction debris, has become a pressing problem to alleviate the current shortage of resources and realize urban sustainable development. Accordingly, this study is designed to employ 4D-GIS (four dimensions-Geographic Information System) and Internet Plus to offer new approach for accurate but dynamic C&D waste management. The present study established a spatio-temporal pattern and material metabolism evolution model to characterize the geo-distribution of C&D waste by combing material flow analysis (MFA) and 4D-GIS. In addition, this study developed a mobile application (APP) for C&D waste trading and information management, which could be more effective for stakeholders to obtain useful information. Moreover, a cloud database was built in the APP to disclose the flows of C&D waste by the monitoring information from vehicles at regional level. To summarize, these findings could provide basic data and management methods for the supply and reverse supply of building materials. Meanwhile, the methodologies are practical to C&D waste management and beyond.

• 상하수도학회지
• /
• 제20권6호
• /
• pp.919-926
• /
• 2006

In this study, environmental impact assessments of wastewater treatment plant (WWTP), sewerage system, and tailrace were performed using LCA methodology. The life cycle stages were divided into 3 categories; construction stage, maintenance stage and demolition & disposal stage. As a tool of impact assessment, Ecoindicator99 containing fate analysis, exposure & effect analysis and damage analysis, was used. As tile results of WWTP LCA, more than 80% of environmental impact was produced from maintenance stage. On the other hand, most of environmental impact was produced from construction stage in the case of tailrace and sewerage system construction.

• KIEAE Journal
• /
• 제13권5호
• /
• pp.103-110
• /
• 2013

This study aims to calculate the $CO_2$ emissions by the properties of construction waste to establish a LCI DB of construction waste generated at the disuse stage. The $CO_2$ emissions from apartment houses was calculated by calculating the energy consumptions by treatment steps to calculate the $CO_2$ emissions by the treatment steps of construction waste. As a result of analyzing the $CO_2$ emissions from a total of 27 complexes, maximum 46,791g-$CO_2/m^2$, minimum 34,893g-$CO_2/m^2$ and average 38,713g-$CO_2/m^2$ were generated, and were varied by the quantity of construction waste in general, but were affected by the transportation distance in case of transportation steps as well. As a result of analyzing the $CO_2$ emissions by the properties of construction waste, average 19,815.50g-$CO_2/m^2$ was generated, the highest, from the example complex at the demolition stage in case of construction wastes, and 1.72g-$CO_2/m^2$ was generated, the lowest, during reclamation. In case of combustible waste, average 11,495.63g-$CO_2/m^2$ was generated, the highest, from the example complex during incineration of wastes, and 21.48g-$CO_2/m^2$ was generated, the lowest, at the waste transportation stage. In case of noncombustible waste, average 522.43g-$CO_2/m^2$ was generated, the highest, from the example complex at the demolition stage, and 1.07g-$CO_2/m^2$ was generated, the lowest, at the transportation stage. In case of other construction wastes, average 645.42g-$CO_2/m^2$ was generated, the highest, from the example complex at the demolition stage, and 47.38g-$CO_2/m^2$ was generated, the lowest, at the middle treatment stage.