• 제목/요약/키워드: delta type

검색결과 998건 처리시간 0.023초

수종의 복합 레진의 표면 거칠기와 색 안정성 (Surface roughness and color stability of various composite resins)

  • 이성이;김현철;허복;박정길
    • Restorative Dentistry and Endodontics
    • /
    • 제32권6호
    • /
    • pp.542-549
    • /
    • 2007
  • 본 연구의 목적은 네 종류의 복합레진의 연마 후의 표면 거칠기에 있어서의 차이와 염색액에 담근 후 색 안정성에 있어서의 차이를 평가하기 위한 것이다. 필러 크기와 함량이 다른(나노입자형, 혼합형, 미세입자형, 흐름성) 네 종류의 광중합 복합레진(색상 A2)을 사용하였다. 산화 알루미늄 마모 디스크(Super-Snap)로 연마하기 전과 후에 평균 표면 거칠기(Ra)를 표면 조도 측정기 (Surftest Formtracer)로 측정하였다. 2% 메틸렌 블루 용액으로 착색하기 전과 후 표본의 색은 SCI geometry를 이용해 spectrophotometer(CM-3700d)로 측정되었다. 표면 거칠기와 색 변화 값은 one-way ANOVA, Scheffe multiple comparison test와 Student t-test로 분석되었다. 연마 후, 표면 거칠기 값은 복합레진의 종류에 관계없이 감소하였다. 연마 후 표면 거칠기와 착색 후 색 안정성에 있어서, 나노입자형 복합레진이 흐름성 레진을 제외한 다른 복합레진들과 유사하였다.

Maltodextrin류의 표면도포에 의한 냉동전분의 Microwave 가열특성 개선 (Improvement of Microwave Heating Properties of Frozen Starch by Spray of Surface Materials)

  • 김은미;한혜경;김인호
    • 한국식품영양과학회지
    • /
    • 제34권7호
    • /
    • pp.1035-1040
    • /
    • 2005
  • 전자레인지를 이용한 조리는 간편 조작 및 조리시간 단축 등의 장점이 있으나, 전자파에 의한 급격한 온도상승으로 식품, 특히 전분성 냉동식품 등의 표면에 급격한 수분증발을 유도하여 식품의 식감저하 및 품질저하 등의 문제점을 발생시킨다. 이를 개선하고자 4종의 도포제를 전분표면에 도포하여 저장 및 전자레인지 가열에 의한 수분을 억제효과를 검토하였다. 조건별로 제조된 시료들을 저장조건 즉 저장온도별$(0,\;20,\;-50^{\circ}C)$, 저장기간(90일)을 달리하여 조사하였다. 실험시료의 물성측정 결과 0, $-20^{\circ}C$에서 저장기간이 길어질수록 hardness, brittleness, cohesiveness 등이 증가되었고, tapioca(TA) 혼합첨가구의 hardness, springiness, gumminess, brittleness, cohesiveness 등이 기본반죽물(Control)보다 낮은 것으로 조사되었다. TA 혼합첨가구 중에서도 $7\%$ M3를 도포한 시료(TM)의 물성이 가장 좋은 것으로 조사되어 TA첨가 및 $7\%$ M3도포가 전자레인지 가열 조리에 의한 품질저하방지에 효과적임을 알 수 있었다. 열전 위 변화는 저 장기간이 길어질수록 호화개시 온도(To)는 낮은 쪽으로 이동하고, 엔탈피는 점차적으로 증가하는 경향을 보였으며, endothermic peak의 면적도 함께 증가하였다. 또한 다른 시료들에 비해 TM의 흡열엔탈피 $({\Delta}H)$가 낮은 것으로 보아 $7\%\;M3$의 도포가 표면의 품질저하방지(경화억제)에 효과적임을 알 수 있었으며 SEM을 이용한 미세구조관찰 시에도 이를 확인할 수 있었다. 저장된 냉동전분들의 물성 및 노화정도를 측정한 결과 control보다는 도포제가 도포가 되지 않은 TN과 TM의 효과가 더 좋았으며, 그 중 $7\%\;M3$가 도포된 TM이 전자레인지 가열조리에 따른 품질개선에 가장 효과적인 것으로 조사되었다.

성페로몬을 이용한 복숭아순나방(Grapholita molesta) 모니터링에 영향을 주는 요인 (Factors Influencing Field Monitoring of the Oriental Fruit Moth, Grapholita molesta, with Sex Pheromone)

  • 김용균;정성채;배성우;권보원;윤향미;홍용표
    • 한국응용곤충학회지
    • /
    • 제46권3호
    • /
    • pp.349-356
    • /
    • 2007
  • 복숭아순나방(Grapholita molesta)의 세 가지 성페로몬 성분(Z8-12:Ac, E8-12:Ac, Z8-12:OH)이 알려져 있으며, 이들은 상용화되어 해충집단 모니터링과 교미교란에 응용되고 있다. 그러나 이들 상용화 제품들을 살펴보면, 성페로몬 성분비 및 각 방출기에 들어있는 유효성분 량에서 있어서 상이했다. 본 연구는 성페로몬을 이용한 복숭아순나방 모니터링에 있어서 수컷 유인과 포획에 대한 변동을 줄 수 있는 요인들을 밝히고, 이들 요인의 최적화를 시도하였다. 이를 위해 성페로몬 성분비 및 함량, 유효방출기간 그리고 트랩 형태 및 설치높이를 분석하였다. 이상적 모니터링을 위해서는 높은 농도(96% 이상)의 Z8-12:Ac 성분이 효과적이었다. 그러나 방출기에 들어 있는 성페로몬 함량은 $0.01-1\;{\mu}g$ 농도에서 야외 설치 이후 90일 동안(6-9월) 차이가 없었다. 트랩은 델타형이 원뿔형 보다 효과적이었으며, 이 트랩의 위치는 과수의 수관부위가 수컷을 유인하는 데 이상적이었다. 이러한 이상적 모니터링 변수를 이용하여 정기적으로 화학농약살포가 이뤄지는 안동 지역의 사과농가에서 복숭아순나방을 모니터링한 결과, 4-5월에 있는 월동세대 이후 3-4회의 성충발생 피크를 감지할 수 있었다.

전분발효 효모에서의 외래 $\alpha$-Amylase 유전자의 세포분열시 안정성 증진 (Mitotic Stability of Heterologous $\alpha$-Amylase Gene in Starch-Fermenting Yeast)

  • 김정희;김근;최영길
    • 미생물학회지
    • /
    • 제32권4호
    • /
    • pp.271-279
    • /
    • 1994
  • ${\alpha}$-Amylase와 glucoamylase를 동시에 안정하게 분비하여 전분을 일단계로 직접 에탄올로 발효시킬수 있는 효모 균주를 개발하기 위하여 glucoamylase를 분비하는 Saccharomyces diastaticus hybrid 균주에 쥐의 침샘 유래의 ${\alpha}$-amylase cDNA 유전자를 plasmid vector를 이용하여 도입하였다. 이 균주로부터 효소생산에 필요한 유전자를 잃어버림이 없이 안정하게 분비할 수 있도록 하기 위하여 $\alpha$-amylase 유전자를 효모의 염색체에 삽입시키기 위한 integrating plasmid vector인 YIpMS$\Delta$R(LEU2)를 제작하였다. 이 vector의 효모형질전환에 있어 원형(circular)상태와 제한 효소 XbaI으로 처리된 직선화된(linearized) 상태의 두가지 형태를 비교한 결과 형질전환 효율에서나 형질전환체내의 $\alpha$-amylase 유전자 보유정도가 모두 직선화된 형태의 경우가 원형상태의 경우보다 높았다. Linearized vecotr를 가진 효모 형질전환체에서의 유전자 발현 안정도는 세포분열을 거듭할수록 episomal vecotr에 의한 효모 형질전환체에서의 발현 안정도보다 우수하게 나타났다. 또한 이 linearized vector를 가진 형질전환체는 $\alpha$-amylase와 glucoamylase를 동시에 분비하여 glucoamylase만 분비하는 원균주보다 2배 이상의 전분분해력을 보였다.

  • PDF

아세트아미노펜 액상좌제의 제초 및 생물학적 동등성 평가 (Preparation and Bioequivalence Test of Acetaminophen Liquid Suppository)

  • 김종국;최한곤;이사원;고종호;이미경
    • Biomolecules & Therapeutics
    • /
    • 제6권2호
    • /
    • pp.213-218
    • /
    • 1998
  • A novel in situ-gelling and mucoadhesive acetaminophen liquid suppository was developed to improve the patient compliance of conventional solid suppository. In this study, acetaminophen liquid suppository, Likipe $n_{R}$, [aminophen/Poloxamer 407/Poloxamer 188/so4ium alginate (5/15/19/0.6%)] with relation temperature at 30-36 "C and suitable gel strength and bioadhesive force, dissolution pattern similar to conventional solid type suppository, Suspe $n_{R}$, was developed. Furthermore, the bioequivalence of two acetaminophen products was evaluated in 16 normal male volunteers (age 22-27 yr, body weight 56-72 kg) following sidle rectal administration. Test product was Likipe $n_{R}$ suppository (Dong-Wha Pharm. Corp., Korea)and reference product was Suspe $n_{R}$204-212 suppository (Hanmi Pharm. Corp., Korea). Both products contain 125 mg of acetaminophen. Four Suppositories of the test and the reference product were administered to the volunteers, respectively, by randomized two period cross-over study (2$\times$2 Latin square method). The determination of acetaminophen was accomplished using HPLC. Average drug concentrations at each sampling time and pharmacokinetic parameters calculated were not significantly different between two products (p>0.05); the area under the curve to last sampling time (24 hr) (AU $Co_{-2}$4h/) (30.14$\pm$8.64 vs 27.98$\pm$ 6.53 $\mu$g .h/ml), maximum plasma concentration ( $C_{max}$) (3.29$\pm$0.87 vs 3.60$\pm$0.66 $\mu$g/ml) and time to maximum plasma concentration ( $T_{max}$) (2.91 $\pm$0.55 vs 2.69$\pm$0.60 h). The differences of mean AUCo $_{24h}$, C-a. and T-between the two products (7.18%, 9.58% and 7.53%, respectively) were less than 20%. The power (1-7) and treatment difference ($\Delta$) for AU $Co_{24h}$, $C_{max}$ and $T_{max}$ were more than 0.8 and less than 0.2, respectively at $\alpha$=0.1. The confidence limits for AU $Co_{24h}$, $C_{max}$ and $T_{max}$ (-0.81 ~13.55%, -1.56~ 17.60 and -3.81 ~18.87%, respectively) were less than $\pm$ 20% at $\alpha$=0.1. These results suggest that the bioavailability of Likipe $n_{R}$ suppository is not significantly different from that of Suspe $n_{R}$ suppsitory. Therefore, two products are bio-equivalent based on the current results.results.lts.sults.results.lts.

  • PDF

굴을 이용한 조미 건조포의 개발 (Development of Seasoned and Dried Oyster Slice)

  • 허민수;박창경;지성준;민관희;김민정;김은정;강경태;김진수
    • 한국식품영양과학회지
    • /
    • 제36권1호
    • /
    • pp.87-92
    • /
    • 2007
  • 남해안 일대에서 다량 생산되고 있는 굴의 소비 촉진을 위하여 조미 굴포의 제조를 시도하였다. 굴 첨가비율에 따른 조미 굴포의 일반성분, 색조 및 관능검사의 결과로 미루어 보아 조미 굴포의 제조를 위한 굴의 최적 첨가비율은 30%로 판단되었다. 최적 조건에서 제조한 조미 굴포는 조미 수리미포에 비하여 아미노산의 총함량은 차이가 없었으며 주요 아미노산으로는 glutamic acid, leucine, lysine 및 threonine 등이었다. 또한, 조미 굴포의 칼슘 및 인 함량은 조미 수리미포에 비해 높았으며, 조미 굴포의 유리아미노산의 총함량 및 taste value는 각각 1,576.8 mg/100 g 및 226.05이었고 맛의 지대하게 영향을 미치는 아미노산은 glutamic acid 및 aspartic acid이었다.

Effects of Dry Roasting on the Vitamin E Content and Microstructure of Peanut (Arachis hypogaea)

  • Eitenmiller, Ronald R;Choi, Sung-Gil;Chun, Jiyeon
    • 농업생명과학연구
    • /
    • 제45권4호
    • /
    • pp.121-133
    • /
    • 2011
  • Effects of roasting on vitamin E content, color, microstructure and moisture of peanuts, and vitamin E content in peanut oils prepared from the roasted peanuts were investigated. Runner-type peanuts were roasted at 140, 150, and $160^{\circ}C$ for 10-20 min. As roasting temperature and time increased, the CIELAB $L^*$ value of peanuts decreased while $a^*$ and $b^*$ values increased, resulting in formation of the golden brown color of roasted peanuts. Moisture ratio (M/Mo) and color $b^*$ value of peanuts roasted at 140 to $160^{\circ}C$ showed a correlation of $b^*=21.61\;(M/Mo)^2-40.62\;(M/Mo)+34.12$ ($R^2=0.9123$). Overall changes in the tocopherol contents of peanuts and peanut oils were significantly affected by roasting temperature and time (p<0.05). Roasting at $140^{\circ}C$ caused a slight increase in the levels of tocopherols of peanuts over roasting time up to 20 min (p<0.05). There was no significant change in the tocopherol levels of peanuts during roasting at $150^{\circ}C$ for 20 min (p>0.05). At $160^{\circ}C$, the levels of tocopherols significantly decreased during the initial 10 min of roasting (p<0.05) while there was no extended loss after 10 min, resulting in about 5, 12, 20, and 10% losses of ${\alpha}$-, ${\beta}$-, ${\gamma}$- and ${\delta}$-T, respectively. After 20 min, total tocopherols decreased by 18%. However, tocopherol contents of pressed peanut oils significantly decreased at all roasting temperatures (p<0.05). After roasting peanuts at $160^{\circ}C$ for 20 min, about 84% of initial ${\alpha}$-T in peanut oils was retained. ${\alpha}$-T was the most stable to roasting while ${\gamma}$-T was the least. Swollen epidermal cells on the inner surface and broken cell walls of parenchyma tissue of peanut cotyledon were observed in peanuts after roasting at $160^{\circ}C$ for 15 min. Severe changes in microstructure of peanut by roasting would contribute to vitamin E stability because of exposure of oil droplets in peanuts to oxygen.

Generation of single stranded DNA with selective affinity to bovine spermatozoa

  • Vinod, Sivadasan Pathiyil;Vignesh, Rajamani;Priyanka, Mani;Tirumurugaan, Krishnaswamy Gopalan;Sivaselvam, Salem Nagalingam;Raj, Gopal Dhinakar
    • Animal Bioscience
    • /
    • 제34권10호
    • /
    • pp.1579-1589
    • /
    • 2021
  • Objective: This study was conducted to generate single stranded DNA oligonucleotides with selective affinity to bovine spermatozoa, assess its binding potential and explore its potential utility in trapping spermatozoa from suspensions. Methods: A combinatorial library of 94 mer long oligonucleotide was used for systematic evolution of ligands by exponential enrichment (SELEX) with bovine spermatozoa. The amplicons from sixth and seventh rounds of SELEX were sequenced, and the reads were clustered employing cluster database at high identity with tolerance (CD-HIT) and FASTAptamer. The enriched nucleotides were predicted for secondary structures by Mfold, motifs by Multiple Em for Motif Elicitation and 5' labelled with biotin/6-FAM to determine the binding potential and binding pattern. Results: We generated 14.1 and 17.7 million reads from sixth and seventh rounds of SELEX respectively to bovine spermatozoa. The CD-HIT clustered 78,098 and 21,196 reads in the top ten clusters and FASTAptamer identified 2,195 and 4,405 unique sequences in the top three clusters from the sixth and seventh rounds, respectively. The identified oligonucleotides formed secondary structures with delta G values between -1.17 to -26.18 kcal/mol indicating varied stability. Confocal imaging with the oligonucleotides from the seventh round revealed different patterns of binding to bovine spermatozoa (fluorescence of the whole head, spot of fluorescence in head and mid- piece and tail). Use of a 5'-biotin tagged oligonucleotide from the sixth round at 100 pmol with 4×106 spermatozoa could trap almost 80% from the suspension. Conclusion: The binding patterns and ability of the identified oligonucleotides confirms successful optimization of the SELEX process and generation of aptamers to bovine spermatozoa. These oligonucleotides provide a quick approach for selective capture of spermatozoa from complex samples. Future SELEX rounds with X- or Y- enriched sperm suspension will be used to generate oligonucleotides that bind to spermatozoa of a specific sex type.

명청-근대시기 마카오 "수상인(水上人)"의 취락 및 건축유형 연구 (A Study on the Water-Faring Community and Architectural Forms of the 'Tanka People' in Macau from the Ming and Qing Dynasties to the Modern Period)

  • 홍서영;한동수
    • 건축역사연구
    • /
    • 제32권3호
    • /
    • pp.7-20
    • /
    • 2023
  • The compositions of ethnic groups in Macau vary with time. Prior to the opening of the port, the majority of the residents in Macau were Chinese people, including those living on land and at sea. After the port was opened, with the increase of Portugal businessmen and missionaries, the population was divided into Chinese people and foreigners (so-called 'Yiren' or 夷人 in Chinese). Chinese people living on land were mainly of Hakka, Fujian, and Cantonese descent. Those living at sea were referred to as 'Tanka People' (named 'Danmin' or 蜑民in Chinese). They lived on floating boats for their entire lives and were similar to the 'drifters' in Japan. Since modern times, many refugees from mainland China and Southeast Asia flooded into Macau due to warfare. The development of industrialization required a larger number of laborers, and some 'coolies' entered Macau in legal or illegal ways, making it a multi-ethnic city. However, the Tanka people were not considered a minority ethnic group under the national ethnic policy of 56 ethnic groups since they did not have an exclusive language and shared dialects in different regions. As the ports inhabited by Tanka people gradually restored foreign trade, the boats and stilt houses used by Tanka people were dismantled to expand the infrastructure area of the ports. Many Tanka people began to live on land and marry people on land, leading to the disappearance of the Tanka group in Macau. The fishing boats and stilt houses used by Tanka people have also disappeared, with only a few remaining in areas such as Pearl River Delta and Hong Kong. This paper examines the natural and social environment of Tanka people in Macau from the Ming and Qing dynasties to the Republic of China, as well as the adaptive changes they adopted for the aforementioned environment in terms of living space and architectural type, on the basis of summarizing the historical activities of Tanka people. Finally, this study provides a layout plan and interior structure of the most commonly used boat for Tanka people from the Ming and Qing dynasties to the Republic of China, with the use of CAD and other technical software, along with reference to written historical documentation, and provides a case study for further research on the architectural history of Macau's inner harbor cities, from anthropological and folklore perspectives.

부분(部分) 등분포(等分布) 전단하중(剪斷荷重)을 받는 이방성(異方性) 구조체(構造體)의 해석(解析) (Analysis of Orthotropic Body Under Partial-Uniform Shear Load)

  • 장석윤
    • 대한토목학회논문집
    • /
    • 제4권1호
    • /
    • pp.1-10
    • /
    • 1984
  • 본(本)논문(論文)은 재료(材料)의 성질(性質)이 직교(直交)하는 방향(方向)으로 상이(相異)한 이방성(異方性) 구조체(構造體)에 부분등분포(部分等分布) 전단하중(剪斷荷重)이 경계(境界)에 작용(作用)할 경우의 수직응력(垂直應力)과 전단응력(剪斷應力)을 나태내는 엄밀해법(解法)을 제시(提示)하였다. 이 해법(解法)은 평형조건(平衡條件)과 적합조건(適合條件)을 동시에 만족하는 탄성론적(彈性論的)인 엄밀 해법(解法)이다. 따라서 이러한 문제(問題)를 해석(解析)하기 위하여 Airy 응력함수(應力凾數)를 이용(利用)하였다. 본해법(本解法)의 타당성(妥當性)을 증명(證明)하기 위하여 이방성(異方性)인 경우의 방정식(方程式)들의 이방성상수(異方性常數)들을 등방성(等方性)인 경우의 상수(常數)들로 대치(代置)할 경우에 등방성(等方性)인 경우의 방정식(方程式)들로 변환(變換)되지 않으면 안된다. 이를 검토(檢討)하기 위하여 L'hospital의 법칙(法則)을 이용하였다. 그 결과(結果) 이방성(異方性)인 경우의 모든 방정식(方程式)들은 등방성(等方性)인 경우의 방정식(方程式)들로 정확히 변환(變換)되었고 이 식들은 이미 연구된 자료(資料)의 값들과 비교(比較)된 결과(結果) 정확히 일치(一致)되었다. 또한 집중하중(集中荷重)의 경우와의 관계(關係)에서는 부분등분포하중(部分等分布荷重)의 특별(特別)한 경우가 집중하중(集中荷重)임을 고려하고 L'hospital의 법칙(法則)을 이용(利用)하면 부분등분포하중(部分等分布荷重)의 경우의 방정식(方程式)들은 바로 집중하중(集中荷重)의 경우의 방정식(方程式)들로 변환(變換)됨을 알 수 있다. 본 결과(結果)로 미루어 보아 해법(解法)의 타당성(妥當性)이 입증(立證)되었다고 할 수 있다. 본해법(本解法)의 방정식(方程式)들은 간단(簡單)한 형태(形態)로 구성(構成)되어 있어 수치결과(數値結果)를 정확히 누구나 얻을 수 있는 장점이 있다. 응력(應力)의 값을 나타내는 수치결과(數値結果)를 이방성재료(異方性材料)인 3단합판(合板)과 중첩합판을 예로 들어 나무결을 2가지 방향(方向)으로 강축(强軸)을 바꾸어 각각의 수직(垂直) 및 전단응력(剪斷應力)을 구(求)하여 도표(圖表)로 표시(表示)하였으며, 그 결과 응력(應力)의 분포(分布)는 재료(材料)의 성질과 강축(强軸)의 방향(方向)에 따라 현저하게 달라지는 현상을 볼 수 있다.

  • PDF