• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1747-1754
• /
• 2016

This paper presents a high accuracy and fast hybrid on-chip temperature sensor. The proposed temperature sensor combines a SAR type temperature sensor with a ${\Sigma}{\Delta}$ type temperature sensor. The SAR type temperature sensor has fast temperature searching time but it has more error than the ${\Sigma}{\Delta}$ type temperature sensor. The ${\Sigma}{\Delta}$ type temperature sensor is accurate but it is slower than the SAR type temperature sensor. The proposed temperature sensor uses both the SAR and ${\Sigma}{\Delta}$ type temperature sensors, so that the proposed temperature sensor has high accuracy and fast temperature searching. Also, the proposed temperature sensor includes a temperature error compensating circuit by storing the temperature errors in a memory circuit after chip fabrication. The proposed temperature sensor was fabricated in 3.3V CMOS $0.35{\mu}m$ process. Its temperature resolution, power consumption, and area are $0.15^{\circ}C$, $540{\mu}W$, and $1.2mm^2$, respectively.

• East Asian mathematical journal
• /
• v.33 no.5
• /
• pp.571-585
• /
• 2017

Let M be a connected n-dimensional submanifold of a Euclidean space $E^{n+k}$ equipped with the induced metric and ${\Delta}$ its Laplacian. If the position vector x of M is decomposed as a sum of three vectors $x=x_1+x_2+x_0$ where two vectors $x_1$ and $x_2$ are non-constant eigen vectors of the Laplacian, i.e., ${\Delta}x_i={\lambda}_ix_i$, i = 1, 2 (${\lambda}_i{\in}R$) and $x_0$ is a constant vector, then, M is called a 2-type submanifold. In this paper we showed that a 2-type surface M in $E^3$ satisfies ${\langle}{\Delta}x,x-x_0{\rangle}=c$ for a constant c, where ${\langle},{\rangle}$ is the usual inner product in $E^3$, then M is an open part of a circular cylinder. Also we showed that if a quadric hypersurface M in a Euclidean space satisfies ${\langle}{\Delta}x,x{\rangle}=c$ for a constant c, then it is one of a minimal quadric hypersurface, a genaralized cone, a hypersphere, and a spherical cylinder.

• Publications of The Korean Astronomical Society
• /
• v.27 no.5
• /
• pp.399-409
• /
• 2012

As a part of the short-period variability survey (SPVS) at Bohyunsan Optical Astronomy Observatory, we obtained time-series BV CCD images in the region of Cyg OB3 association centered on the open cluster NGC 6871. The observations were performed for 18 nights from September 5, 2008 to September 1, 2009. We found 15 short-period variable stars in the region. They are ${\delta}$ Scuti type stars belonging to the local spiral arm, Orion spur. Among them, only two stars were previously known, and the rest are newly discovered ones. In this paper, we have performed a multiple-frequency analysis to determine frequencies of the 15 ${\delta}$ Scuti type stars, using the discrete Fourier transform and linear least-square fitting methods. One of the newly discovered variable stars is a double-mode ${\delta}$ Scuti type star with the fundamental and the first overtone modes, and two are high amplitude ${\delta}$ Scuti stars.

• Microbiology and Biotechnology Letters
• /
• v.27 no.5
• /
• pp.359-363
• /
• 1999

To prevent appearance of resistant mosquitoes against $\delta$-endotoxin of bacillus thuringiensis subsp. israelensis (Bti) in field, a mosquitocidal Bacillus thuringiensis strain 21-2(Bt21-2) producing a new type of $\delta$-endotoxin was isolated. The strain Bt 21-2 belongs to H serotype 43, B. thuringiensis subsp. guiyangiensis (Btg). The $\delta$-endotoxins from the strain Bt 21-2 and the strain Bti were a cuboid shape morphologically, but the $\delta$-endotoxin of the strain Bt 21-2 was composed of 150, 90 and 70kDa proteins on SDS-PAGE, and the antigenicity of $\delta$-endotoxin of the strain Bt 21-2 was different from that of the strain Bti on immunoblot. The $\delta$-endotoxin gene of the strain Bt 21-2 was not amplified with specific primers of $\delta$-endotoxin gene (cry4A and cry4B) of the strain Bti on PCR.

• Economic and Environmental Geology
• /
• v.35 no.5
• /
• pp.379-393
• /
• 2002

Within the Boseong-Jangheung area of Korea, five hydrothermal gold (-silver) quartz vein deposits occur. They have the characteristic features as follows: the relatively gold-rich nature of e1ectrurns; the absence of Ag-Sb( -As) sulfosalt mineral; the massive and simple mineralogy of veins. They suggest that gold mineralization in this area is correlated with late Jurassic to Early Cretaceous, mesothermal-type gold deposits in Korea. Fluid inclusion data show that fluid inclusions in stage I quartz of the mine area homogenize over a wide temperature range of 200$^{\circ}$ to 460$^{\circ}$C with salinities of 0.0 to 13.8 equiv. wt. % NaCI. The homogenization temperature of fluid inclusions in stage II calcite of the mine area ranges from 150$^{\circ}$ to 254$^{\circ}$C with salinities of 1.2 to 7.9 equiv. wt. % NaCI. This indicates a cooling of the hydrothermal fluid with time towards the waning of hydrothermal activity. Evidence of fluid boiling including CO2 effervescence indicates that pressures during entrapment of auriferous fluids in this area range up to 770 bars. Calculated sulfur isotope composition of auriferous fluids in this mine area (${\delta}^34S$_{{\Sigma}S}$$\textperthousand$) indicates an igneous source of sulfur in auriferous hydrothermal fluids. Within the Sobaegsan Massif, two representative mesothermal-type gold mine areas (Youngdong and Boseong-Jangheung areas) occur. The ${\delta}^34S values of sulfide minerals from Youngdong area range from -6.6 to 2.3$\textperthousand$ (average=-1.4$\textperthousand$, N=66), and those from BoseongJangheung area range from -0.7 to 3.6$\textperthousand$ (average=1.6$\textperthousand$, N=39). These i)34S values of both areas are comparatively lower than those of most Korean metallic ore deposits (3 to 7TEX>$\textperthousand$). And, within the Sobaegsan Massif, the ${\delta}^34S values of Youngdong area are lower than those of Boseong-Jangheung area. It is inferred that the difference of ${\delta}^34S values within the Sobaegsan Massif can be caused by either of the following mechanisms: (1) the presence of at least two distinct reservoirs (both igneous, with ${\delta}^34S values of < -6 $\textperthousand$ and 2$\pm$2 %0) for Jurassic mesothermal-type gold deposits in both areas; (2) different degrees of the mixing (assimilation) of 32S-enriched sulfur (possibly sulfur in Precambrian pelitic basement rocks) during the generation and/or subsequent ascent of magma; and/or (3) different degrees of the oxidation of an H2S-rich, magmatically derived sulfur source ${\delta}^34S = 2$\pm$2$\textperthousand$) during the ascent to mineralization sites. According to the observed differences in ore mineralogy (especially, iron-bearing ore minerals) and fluid inclusions of quartz from the mesothermal-type deposits in both areas, we conclude that pyrrhotite-rich, mesothermal-type deposits in the Youngdong area formed from higher temperatures and more reducing fluids than did pyrite(-arsenopyrite)-rich mesothermal-type deposits in the Boseong-Jangheung area. Therefore, we prefer the third mechanism than others because the ${\delta}^34S values of the Precambrian gneisses and Paleozoic sedimentary rocks occurring in both areas were not known to the present. In future, in order to elucidate the provenance of ore sulfur more systematically, we need to determine ${\delta}^34S values of the Precambrian metamorphic rocks and Paleozoic sedimentary rocks consisting the basement of the Korean Peninsula including the Sobaegsan Massif.

• Journal of Korea Foundry Society
• /
• v.10 no.5
• /
• pp.417-425
• /
• 1990

The purpose of this study is to investigate the effect of Be addition on the microstructure and mechanical properties of as-cast and homogenization treated Al-Li-(Be)alloys. The ductility of as-cast Al-Li alloy was increased by the addition of Be and the fracture morphology was changed from brittle to ductile mode. Also, hardness and strength have been decreased by homogenization treatment. The morphology of eutectic structure which consists of ${\alpha}(Al)$ and ${\alpha}(Be)$ was changed from lammellae to spherical type by homogenization treatment. The shape of ${\alpha}(Be)$ phase has been revealed as hollow type by TEM observation. It consists of outer surfaces with well defined crystal facets and the core filled with ${\alpha}(Al)$. The microstructure of as-cast Al-Li-Be alloys showed coarse ${\delta}'$, fine ${\delta}'$, and coarse ${\delta}$ phases. The coarse and fine ${\delta}'$ phases were formed at Be-rich phase /matrix interfaces and in matrix, respectively. By homogenization treatment, the ${\delta}$ phase in Al-Li and Al-Li-Be alloys dissolved and the size of ${\delta}$ phase in Al-Li-Be alloys was finer than that of Al-Li alloy.

• Communications of the Korean Mathematical Society
• /
• v.18 no.3
• /
• pp.439-447
• /
• 2003

Let (equation omitted) be a symmetrizable Kac-Moody algebra with the indecomposable generalized Cartan matrix A and W be its Weyl group. Let $\theta$ be the highest root of the corresponding finite dimensional simple Lie algebra ${\gg}$ of g. For the type ${A_N}^{(r)}$, we give an element $\omega_{o}\;\in\;W$ such that ${{\omega}_o}^{-1}({\{\Delta\Delta}_{+}})\;=\;{\{\Delta\Delta}_{-}}$. And then we prove that the degree of nilpotency of the subalgebra (equation omitted) is greater than or equal to $ht{\theta}+1$.

• Journal of the Korean Society of Visualization
• /
• v.5 no.2
• /
• pp.56-63
• /
• 2007

Flow visualization and aerodynamic characteristics of delta wings with two different leading edge geometries are investigated by PIV system and wind tunnel balance when the Reynolds number is about based on the freestream velocity and the root chord length. Delta wing models have 65-deg swept angle, and the leading edge shapes are divided into round- and sharp- type. The experimental results indicated that the leading-edge vortex strength and aerodynamic coefficient in the round leading edge are stronger and more, respectively than those in the sharp one. Therefore the flow interactions between vortices and the boundary layer are more desirable or more rapidly swirled in the round-type leading edge.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.889-893
• /
• 2011

The energetics and transition state (TS) structures of the reactions of six substrates, $R_1R_2P$(=O or S)Cl-type where $R_1=R_2$=Me and/or MeO, with ammonia in acetonitrile are theoretically investigated at the level of CPCM-MP2/6-31+G(d) and CPCM-MP2/6-311+G(3df,2p). The degrees of distortion of TS from the ideal trigonal bipyramidal pentacoordinate, ${\Delta}{{\delta}}_{{\neq}b}$ for a backside and ${\Delta}{{\delta}}_{{\neq}f}$ for a frontside attack, are calculated. The results of calculation suggest that the feasibility of a frontside attack for P=S is greater than that for P=O system when the two ligands, $R_1$ and $R_2$, becomes larger. The experimental and calculated results of anilinolyses of $R_1R_2P$(=O or S)Cl-type show the consistent tendencies.

• Journal of The Korean Astronomical Society
• /
• v.16 no.2
• /
• pp.55-63
• /
• 1983

From UBVRI photometry and space motion data of 232 late type dwarf stars, it is found that for the stars of (R-I)<0.5, $\Delta$(U-B) and $\Delta$(B-V) color excesses are correlated with their orbital eccentricities. Therefore, $\Delta$(U-B) and $\Delta$(B-V) color excesses can be used as possible photometric abundance indicators for the stars of (R-I)<0.5. For the stars of (R-I)${\geq}$0.5, the correlation between color excess and orbital eccentricity is not clear. However, it is interesting to note that the high orbital eccentricity stars show some blue deficiencies and these blue deficiencies seem to be correlated with orbital eccentricity.