• 한국초전도ㆍ저온공학회논문지
• /
• 제15권4호
• /
• pp.15-20
• /
• 2013

We investigated the flux pinning properties of both 10 mol% Zr-and Sn-doped $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) films with the same thickness of ~350 nm for a comparative purpose. The films were prepared on the $SrTiO_3$ (STO) single crystal substrate by the metal-organic deposition (MOD) process. Compared with Sn-doped YBCO film, Zr-doped one exhibited a significant enhancement in the critical current density ($J_c$) and pinning force density ($F_p$). The anisotropic $J_{c,min}/J_{c,max}$ ratio in the field-angle dependence of $J_c$ at 77 K for 1 T was also improved from 0.23 for Sn-doped YBCO to 0.39 for Zr-doped YBCO. Thus, the highest magnetic $J_c$ values of 9.0 and $2.9MA/cm^2$ with the maximum $F_p$ ($F_{p,max}$) values of 19 and $5GN/m^3$ at 65 and 77 K for H // c, respectively, could be achieved from Zr-doped YBCO film. The stronger pinning effect in Zr-doped YBCO film is attributable to smaller $BaZrO_3$ (BZO) nanoparticles (the average size ${\approx}28.4$ nm) than $YBa_2SnO_{5.5}$ (YBSO) nanoparticles (the average size ${\approx}45.0$ nm) incorporated in Sn-doped YBCO film since smaller nanoparticles can generate more defects acting as effective flux pinning sites due to larger incoherent interfacial area for the same doping concentration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1244-1245
• /
• 2008

Recently, piezoelectric transformer is applied to wide fields. Multi layer piezoelectric transformer has the advantage of high step up ratio, electromechanical coupling coefficient(Kp) and mechanical quality factor(Qm), but is indicated of peeling-phenomenon of electrode, rising sintering temperature made price of costly electrode. So in this study, it discuss on method for fabrication of rosen type piezoelectric transformers. For the fabrication as rosen type piezoelectric transformers, synthesized the powder using 0.01Pb$(ni_{1/3}Nb_{2/3})O_3$ - 0.08Pb$(Mn_{1/3}Nb_{2/3})O_3$ - 0.91Pb$(Zr_{0506}Ti_{0496})O_3$ (abbreviated as PNN-PMN-PZT) ceramics. The density, microstructure, dielectric and piezoelectric properties as a function of sintering temperature were investigated. The results indicated that the optimized properties of ceramics were obtained at sintering temperature of 1200$^{\circ}C$, showed the value of $d_{33}$=273pC/N, $K_p$=0.60 $Q_m$=1585, ${\varepsilon}_r$=1454, density=7.917$g/cm^3$ and $tan{\delta}$=0.0064.

• 대한기계학회논문집A
• /
• 제28권3호
• /
• pp.281-288
• /
• 2004

The hybrid composite material (Al/GFRP laminates) are applied to the fuselage and wing in a aircraft. Therefore, Al/GFRP laminates suffer from the cyclic bending moments. This study was to evaluate the effect of fiber stacking angle on the fatigue crack propagation and delamination behavior using the relationship between crack growth rate (da/dN) and stress intensity factor range (ΔK) in Al/GFRP laminates under cyclic bending moment. The variable delamination growth behavior in case of three different type of fiber orientations, i.e., [Al/O$_2$/Al], [Al/+45$_2$/Al] and [Al/90$_2$/Al] at the interface of Al layer and glass fiber layer was measured by ultrasonic C-scan images. As results of this study, It represent that the delamination shape should turns out to have more effective characteristics on the fiber stacking angle. The extension of the delamination zone in case of [Al/+45$_2$/Al] and [Al/90$_2$/Al] were not formed along the fatigue crack profile. The shape of delamination zone depend on fiber stacking angle and the variable type with the delamination contour decreased non-linearly toward the crack tip at the Al layer.

• 한국한의학연구원논문집
• /
• 제2권1호
• /
• pp.514-550
• /
• 1996

There are many theory in acupuncture mechanism, so we must know the detail contents. and then we can use the acupuncture as we know. the follow article will be helpful in this part. 1. Spinal cord are role in intermediate part in somatosensorypathway also in acupuncture stumulating tract 2. Acute pain pathway started in laminae I, V of gray colmn, next are the spinothalamic tract(trigeminal spinothalamic tract in above neck part) and then go to the specific thalamic nucleus. but chronic pain in laminae II, III, VI, VII, next are spinoreticular tract(trigeminal spinoreticular tract in the neck part) and finally to the nonspecific thalamic nucleus. 3. Thalamus is very important area in somatosensory stimuation including acupuncture stumulating sensory also as a pain control center. but except this, there are Hypothalamus, Limbic system Cerebral cortex and Cerebellum as intermediator. as we Know hypothalamus is related to the emotional analgesic system with a limbic system. 4. A ${\delta$ fiber has relationship in Acute, sharp and initial pain, contrary this C fiber is related with Chronic, dull and last pain. 5. In Acupuncture mechanism of pain analgesia, there are two theory, one is gate control theory as large fiber another is stimuation produced analgesia as small diameter fier. 6. In DNIC, the stimulation sources are mechanical, thermal, heating, pain and acupuncture stimulation etc. we call these as a Heterotopic Noxious Stimulation. 7. In DNIC, SRD(Subnucleus reticularis dorsalis)is core nucleus in pain imtermediated analgesic mechanism. 8. Takeshige insisted nonacupuncture point dependent analgesic mechanism and acupuncture point dependent analgesic mechanism. and protested that Stimulation acupuncture piing evoke blocking nomacupuncture point analgesic pathway.

• 대한한방소아과학회지
• /
• 제24권3호
• /
• pp.92-105
• /
• 2010

Objectives: The purpose of this study is to investigate the effects of Daecheongryong-tang (DCRT) on the adipogenesis in 3T3-L1 preadipocytes. Methods: 3T3-L1 preadipocytes were differentiated with adipogenic reagents by incubating for 2 days in the absence or presence of DCRT ranging 0.25 and 2%. The effect of DCRT on adipogenesis was examined by Oil red O staining, and the protein, RNA, and RT-PCR were measured. Results: Our results showed that DCRT decreased the TG content by ORO staining. To elucidate the mechanism of the effects of DCRT on lowering TG content in 3T3-L1 adipocytes, we examined the DCRT modulate expressions of transcription factors to induce adipogenesis and adipogenic genes which is related to the regulation of accumulation of lipids. As a result, the expression of SREBP1, C/$EBP{\beta}$, C/$EBP{\delta}$, C/$EBP{\alpha}$, and $PPAR{\gamma}$ genes, which induce the adipose differentiation and adipose-specific aP2, adipsin, LPL, CD36, TGF-${\beta}$ and adiponectin genes which regulates fat formations, were decreased. In addition, DCRT reduced the expression of iNOS and IL-6 in 3T3-L1 adipocytes, resulting in inflammation. Conclusions: DCRT could regulate transcript factor related to induction of adipose differentiation, inhibit the accumulation of lipids and expression of the adipogenic genes.

• 한국재료학회지
• /
• 제5권3호
• /
• pp.357-363
• /
• 1995

PECVD(Plasma-enhanced Chemical Vapor Deposition)법을 이용하여 증착한 $Ta_{2}$O_{5}$ 박막의 전기적 특성과 미세구조에 미치는 RTA(Rapid Thermal annealing) 후속 고온 열처리의 영향을 조사하였다. $Ta_{2}$O_{5}$ 박막의 미세구조와 interface 거동을 관찰하기 위하여XRD(X-ray Diffractometer), TEM(Transmission Electron Microscope), AES(Auger Electron Spectroscope) 분석을 실시하였으며, 전기적 특성을 관찰하기 위하여 I-V, C-V 측정을 하였다. $600^{\circ}C$에서 60초간 열처리를 실시하였을 경우 가장 우수한 유전 특성 및 누설 전류 특성을 보였으며, 유전 상수는 26이었고 누설 전류는 5 $\times$ $10^{-11}$A/$cm^{2}$이었다. $600^{\circ}C$ 이상의 온도에서 행한 열처리에 의하여 박막의 누설 전류와 유전 특성은 복합적으로 영향을 받았음을 알 수 있었다. 이는 $600^{\circ}C$의 열처리에서 이루어지고있는 박막의 결함감소와 고밀화 현상과 함께 80$0^{\circ}C$ 이상의 열처리에서 발생하는 조밀육방정 결정 구조를 가지는 $\delta$-$Ta_{2}$O_{5}$의 결정화에 기인함을 알 수 있었다. 또한 TEM과 AES분석 결과로부터 이들 박막의 누설 전류와 유전상수의 변화는 열처리에 의하여 일어나는 Ta-O-Si transition층의 생성과 성장에 기인함을 알 수 있었다. 따라서 $Ta_{2}$O_{5}$ 박막의 전기적 특성의 변화는 RTA 후속 열처리에 따른 계면 반응과 결정화 그리고 박막의 조밀화에 그 영향이 있음을 알 수 있었다.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 추계공동학술대회
• /
• pp.407-411
• /
• 2002

삼치 시퀀스(ternary sequence)는 -1, 0, 1의 3가지 값으로만 구성되어 있는 디지털 코드이다. 따라서 디지털 하드웨어로 구현이 편리하다는 장점이 있다 본 시퀀스는 환형 자기상관함수(circular/periodic autocorrelation function)가 이상적으로 나타나는 특징을 가지고 있다. 하지만 본 시퀀스를 이용해 송신기와 수신기사이의 통신 채널 특성을 긴 시간 구간에 걸쳐서 파악하고자 상호상관 법을 사용하기 위해서는 환형이 아니라 선형적인 자기상관함수(linear/aperiodic autocorrelation function) 특성이 요구된다 따라서 본 고에서는 삼치 시퀀스의 비 이상적인 선형 자기상관함수를 개선시키기 위해 주파수 영역에서 역 필터링과 쓰레쉬홀딩 연산을 결합한 방법과 특이치분해(SVD)방법을 제안하며 잡음이 있는 상황에서 그 성능을 평가하고자 한다. 제안한 방법은 시뮬레이션 결과 역 필터링 방법은 신호대잡음비가 30㏈인 경우 최대 부엽 레벨이 11㏈ 감소했고 SVD 방법도 유사한 결과를 보였으나 잡음에 좀 더 약하며 특이치 값의 세밀한 조정이 필요하였다.

• 천문학회지
• /
• 제39권2호
• /
• pp.41-50
• /
• 2006

We present the results of new multi-color CCD photometry for the contact binary XZ Leo, together with reasonable explanations for the period and light variations. Six new times of minimum light have been determined. A period study with all available timings confirms Qian's (2001) finding that the O-C residuals have varied secularly according to $dP/dt\;=\;+8.20{\times}10^{-8}\;d\;yr^{-l}$. This trend could be interpreted as a conservative mass transfer from the less massive cool secondary to the more massive hot primary in the system with a mass flow rate of about $5.37{\times}10^{-8}\;M_{\odot}\;yr^{-l}$. By simultaneous analysis of our light curves and the previously published radial-velocity data, a consistent set of light and velocity parameters for XZ Leo is obtained. The small differences between the observed and theoretical light curves are modelled by a blue third light and by a hot spot near the neck of the primary component. Our period study does not support the tertiary light but the hot region which may be formed by gas streams from the cool secondary. The solution indicates that XZ Leo is a deep contact binary with the values of q=0.343, $i=78^{\circ}.8$, ${\Delta}(T_1-T_2)=126\;K$, and f=33.6 %, differing much from those of Niarchos et al. (1994). Absolute parameters of XZ Leo are determined as follows: $M_1=1.84\;M_{\odot},\;M_2=0.63\;M_{\odot},\;R_1=1.75\;R_{\odot},\;R_2=1.10\;R_{\odot},\;L_1=7.19\;L_{\odot},\;and\;L_2=2.66\;L_{\odot}$.

• 천문학회보
• /
• 제36권2호
• /
• pp.113.2-113.2
• /
• 2011

We observed a low-mass pre-main sequence star, HBC722 (also known as $LkH{\alpha}$ 188 G4), with Camera for QUasars in EArly uNiverse (CQUEAN) attached to 2.1 Otto Struve telescope at McDonald Observatory, USA. HBC722 is a new FU orionis-type object in the direction of NGC7000/IC5070, which produced large amplitude optical outbursts (${\delta}V$=4.7 mag over one year) for a few months and reached the peak in 2010 September. We carried out the photometric observation in SDSS r,i, and z band in 2011 April, July and August to monitor the long term decrease of its brightness. We also made continuous observation in r-band for half night in July, and whole two nights in August to investigate short term variability which could be related to the rotation of the central star or the inner circumstellar disk. In this poster, we present a preliminary result of the photometric observation for HBC722.

• 천문학회보
• /
• 제36권2호
• /
• pp.141.1-141.1
• /
• 2011

New CCD BVR light curves of BD And are presented. Our light curves with nearly equal depths for both primary and secondary eclipses show well-defined photometric waves outside eclipse for all of BVR bandpasses. The orbital period is greatly revised as $0.^d92580519$ which is twice longer than that known previously. Sixteen timings from our observations and thirteen ones from the SuperWASP measurements were calculated. All available timings over 76 years, including ours, were analyzed to figure out the dynamical behavior of the system. It was found that the recent CCD O-C residuals varied in a cyclical way with a period of $9.^y18$ and a semi-amplitude of $0.^d0046$. The secondary period of $9.^y18$ is the most shortest one among those which have been ever found in the short period RS CVn binary stars. The periodic variation most likely arises from the light-travel time effect due to a low-mass ($m_3{\sim}0.88\;M_{\odot}$) tertiary companion moving in an orbit with an large eccentricity ($e_3$=0.70) and a low inclination ($i_3{\sim}28^{\circ}$). The Applegate mechanism could not operate properly in both components because the model parameters require too much large luminosity changes of ${\Delta}L/L_{p,s}$ > 10. The new light curves were synthesized using the 2003 version of Wilson-Divinney code. It was found useful to model two huge spots on the surface of the hotter star and a third-light in order to minimize the residuals from the observations. Astronomical basic parameters were deduced from our photometric solution.