• 펄프종이기술
• /
• 제47권4호
• /
• pp.21-29
• /
• 2015

In this study, the feasibility of utilizing wood chips from pitch pine (Pinus rigida) was evaluated for bioethanol production by an organosolv pretreatment and enzymatic saccharification. When wood chips from pitch wood were pretreated with 75% (v/v) ethanol and 1.7% sulfuric acid as a catalyst at H-factor 2000, average pulp yield was 43.3%, which pretreated wood fibers showed higher glucan (55.8%) and lower lignin (12.2%) contents than untreated control (43.9% glucan and 27.8% lignin). After enzymatic saccharification, the organosolv pulps with 56.2% delignification rate reached above 97% conversion rate of cellulose to glucose. These results indicated that increasing the delignification rate causes micro pores on the surface of organosolv pulps resulting in improved the accessibility of enzyme onto the substrate. Moreover, it was in agreement with the SEM examination of wood fibers.

• 임산에너지
• /
• 제18권2호
• /
• pp.62-69
• /
• 1999

목재 세포벽중의 셀룰로오스의 알칼리 팽윤구조는 리그닌에 의해 크게 영향을 받는다. 본 연구에서는 알칼리 팽윤특성에 관한 리그닌의 영향을 명확히 하기 위하여 신갈나무의 정상재 및 부후재를 이용하여 X선 회절법과 자외선 현미경법에 의해 검토하였다. 그 결과, 목재 셀룰로오스는 고농도의 알칼리 수용액 중에서 머서화 처리를 하여도 결정변태가 일어나지 않으며 탈리그닌 후에도 결정의 변화는 없었다. 즉, 목재세포벽중의 셀롤로오스 결정은 리그닌의 존재에 의해 알칼리 팽윤이 억제되어 결정의 변태는 발생하지 않으며 탈리그닌 후에도 결정의 구조는 변화되지 않는 것으로 생각되었다.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.20-25
• /
• 2009

Residual extractives had a noticeable impact on the brightness of unbleached hardwood kraft pulps (trembling aspen). The brightness-impacting extractives were effectively removed by oxygen delignification. In addition, oxygen delignification was more effective in removing chromophores in hardwood unbleached kraft pulps than in those of softwood (loblolly pine). The residual extractives in unbleached hardwood kraft pulps also affected the pulp color, primarily redness and the L value. These redness-related extractives in unbleached hardwood kraft pulps were also effectively removed by oxygen delignification. There were no significant color differences between untreated and solvent-extracted oxygen-delignified aspen kraft pulps. The residual extractives in unbleached and oxygen-delignified softwood (loblolly pine) kraft pulps did not have a significant impact on either brightness or pulp color.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.41-47
• /
• 2003

Recently, interest in utilization plan of recycling paper have been enhanced. Therefore, this research aimed to develop the manufacture process of cellulose acetate using old newsprint by acetosolv pulping process. And the manufactured cellulose acetate was also analyzed, especially based on chemical properties. The summarized results in this research were as follows; Reaction time, kind and amount of catalyst, and ratio of liquor to material were varied during acetosolv pulping process of old newsprint. Ratio of liquor to material did not give the significant difference in reaction product. Delignification rate was increased with increasing reaction time during acetosolv pulping, but yield and degree of substitution decreased with increasing reaction time. Sulfuric acid are better catalyst than hydrochloric acid in acetosolv pulping process for old newsprint, and optimal addition amount of catalyst was 1% based on reaction material. Delignification, yield, and degree of substitution were influenced by the catalyst and reaction time. Under pulping condition of $120^{\circ}C$ in 1/12 liquor to material ratio and 60min, degree of substitution was about 0.7. The acetylation reaction was not completely caused by these reaction condition. The examination of the FT-IR spectra revealed that absorption band(1200$\textrm{cm}^{-2}$, 1,750$\textrm{cm}^{-1}$) caused by carbonyl group were confirmed.

• Journal of the Korean Wood Science and Technology
• /
• 제33권4호통권132호
• /
• pp.9-14
• /
• 2005

목재에 대한 탈리그닌처리에 의한 목재의 흡음성능과 구조적 특징의 변화를 관찰하고자 목재횡단방향으로 채취한 원반형시험편을 탈리그닌처리하여 무 처리 목재와 구조적 특징의 변화를 관찰하고, 흡음율을 측정 비교하였다. 측정주파수범위에서 탈리그닌처리한 시험편이 보통의 시험편보다 높은 흡음율을 나타내었으며, 특히 2~4 KHz의 주파수영역에서는 50% 정도 높은 흡음율을 나타내었다. 또한 탈리그닌처리한 목재는 무 처리 목재보다 중량이 8% 정도 감소하였으며, 탈리그닌처리한 목재의 횡단면에서는 다수의 미세할렬이 발생하여 이들이 흡음공극으로 작용하여 특정주파수영역에서 흡음율이 증가된 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.7-12
• /
• 1994

In recent years, the municipal wastes recognized resources. This study was performed to survey the changes of main components of the pretreated(chemical, physical) lignocellulosic biomass. The result can be summerized as follows; In pulp fiber composition, newsprint and corrugating container were mainly consist of softwood fiber(tracheid). But computer print out and magazine had a large amount of hardwood fiber(wood fiber). And, carbohydrate content in the various lignocellulosic biomass increases as the following orders : Magazine < Newsprint < Corrugating container < Computer print out. In the chemical pretreatments for the delignification, sodium hypochlorite pretreatment was more effective than sodium hydroxide. By washing, ash content of lignocellulosic biomass was decreased. Physical pretreatments were less effective than chemical pretreatment for the delignification. On the other hand, in physical pretreatments, ash content of lignocellulosic biomass was the same tendency as in the chemical pretreatments.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.317-321
• /
• 2006

The investigation of the formation of organic sulfur compounds (i.e., odor species), mainly methyl mercaptan and demethyl suifide, during kraft pulping has been conducted, in which both hardwood and softwood species were used. It was discovered that there is an organic sulfur compounds formation phase transition point with respect to delignification extent. The transition point occurs at a kappa number of approximately 35 and 20 for softwoods and hardwoods, respectively. The results also showed that both low sulfidity and anthraquinone (AQ) addition are helpful to control the formation of theses organic sulfur compounds during kraft pulping. Whereas Hexenuronic acid (HexA) has contribution to Kappa number, the extended delignification not only lead to low pulp yield, but also be adverse to odor control. A significant in-digester odor reduction can be achieved if the pulping is to be terminated before phase transition point and combined with AQ addition.

• 한국균학회지
• /
• 제26권2호통권85호
• /
• pp.144-152
• /
• 1998

선택적 리그닌 분해능을 가지고 생물펄프공정에 사용가능한 백색부후균을 얻기 위하여 94종류의 목재부후균을 검정하였고 선발된 7개종에 대하여 활엽수와 침엽수의 부후능력을 측정하였다. 우선 백색부후균은 셀룰로오즈 분해효소, 페놀산화효소, laccase, peroxidase 등의 효소활성을 간단한 방법으로 검정하여 선발하였는데, Bavendamm test에서 양성을 나타내는 대부분의 균들은 syringaldazine을 사용한 laccase test에서도 강한 반응을 나타낸 반면, 음성반응을 나타낸 대부분의 균들은 laccase와 peroxidase test에서도 음성반응을 나타내었다. 선택적 리그닌 분해능력을 지닌 부후균을 선발하기 위하여 부후균을 은사시나무와 일본잎갈나무(낙엽송) 목재블럭에 접종하여 12주간 배양한 후에 부후된 목재의 중량감소율, 리그닌 량의 감소, 형태적 변화들을 화학분석과 주사전자현미경을 통하여 분석하는 목재부후 실험을 실시하였다. 이 실험에서 사용한 거의 모든 균주는 목재블럭의 중량감소율이 일본잎갈나무 보다 은사시나무에서 2배이상 높게 나타났으며 균을 접종하지 않은 목재블럭에서는 중량감소가 전혀 나타나지 않았다. Ceriporiopsis subvermispora와 Phanerochaete chrysosporium이 다른 균주에 비해서 침엽수와 활엽수의 리그닌을 모두 잘 분해시키는 것으로 나타났으나 분해 능력은 Ceriporiopsis subvermispora가 더욱 우수하였다. Bjerkandera adusta와 미동정된 2균주는 은사시나무에서만 상대적으로 높은 리그닌 분해능력을 나타내었다. B. adusta는 모든 세포벽 성분을 동시에 분해시켜서 2차세포벽을 얇게 만들었으나 다른 균주들은 선택적 리그닌 분해력을 나타내어 두 세포의 세포벽 사이에 위치하는 중벽에 존재하는 리그닌을 분해시켜서 세포를 분리시키는 것이 관찰되었다.

• 한국산림과학회지
• /
• 제61권1호
• /
• pp.27-36
• /
• 1983

본(本) 연구(硏究)는 질산(窒酸)펄프화법의 기술(技術)을 확립하기 위한 기초자료(基礎資料)를 얻기 위하여 실시(實施)하였다. 값이 비싸고 목재(木材)에 침투성(浸透性)이 불량(不良)한 질산(窒酸)을 직접 적용시키지 아니하고, 알카리전처리(前處理)로 어느정도 탈리그닌이 진행된 시료(試料)를 사용, 질산(窒酸)펄프화 2단증해(段蒸解)를 행하여 전처리(前處理)가 탈리그닌 및 펄프수율(收率)에 미치는 영향(影響) 및 펄프화 과정(過程)에서의 탄수화물(炭水化物)과 리그닌의 용출(溶出)거동을 구명(究明)코저 하였다. 질산(窒酸)펄프화의 제(第) 1 단증해(段蒸解)에 있어서 증해시간(蒸解時間)이 증가함에 따라 펄프수율(收率)이 감소하였으며 질산농도(窒酸濃度) 1, 2%보다 3%가 펄프수율(收率) 및 탈리그닌에 현저히 영향(影響)하였다. 또한 알카리전처리(前處理)는 질산(窒酸)펄프의 수율(收率)에 크게 영향하였으며 79%의 전처리수율(前處理收率)로서 충분한 탈리그닌 효과(効果)를 얻을 수 있었다. 질산(窒酸)펄프화 과정에서 용출(溶出)되는 탄수화물(炭水化物)은 주로 xylose였으며, 이들의 용출(溶出)은 증해시간(蒸解時間)이 증가함에 따라 증가되었는바, 이는 탄수화물(炭水化物)에 대한 질산(窒酸)의 산화작용(酸化作用)으로 도입된 carbonyl기(基)가 탄수화물(炭水化物)의 붕괴를 초래한 결과로 생각된다.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.52-57
• /
• 2009

Soda and kraft pulping experiments were carried out in order to investigate the pulping characteristics of bamboo grown in Vietnam. The merit of kraft pulping was not observed for bamboo pulping from the viewpoint of delignification and screened pulp yield. The improvements of delignification during soda and kraft pulping of bamboo were observed by the addition of AQ. The bamboo pulp leaded the bulkier structure than those made from SwBKP and HwBKP. The average fiber length was 1.62mm which is shorter than those of SwBKP, but longer than those of HwBKP. It was found that the physical properties of bamboo pulp sheet could be varied by the pulping method, cooking condition, AQ addition, bleaching and refining etc.