• 제목/요약/키워드: delay field test

검색결과 83건 처리시간 0.033초

Cold Tolerance Characteristic Test of High Yield Tongil-type Rice Breeding Lines for Processing

  • Kang-Su Kwak;Sea-Kwan Oh;Kuk-Hyun Jung;Dae-Ha Seo
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.278-278
    • /
    • 2022
  • Recently, the yield potential of high yield Tongil-type rice varieties has greatly increased, reaching 817kg/10a(Geumgang No.1). Moreover, in order to promote rice consumption and strengthen the competitiveness of the rice processing industry, the R&D of high yield Tongil-type rice varieties for each processing purpose, such as rice noodles, grain feed and industrial materials, has been continuously carried out. However, because Tongil-type rice varieties or lines are generally very vulnerable to cold damage, cold tolerance test can be said to be absolutely necessary to improve the cultivation safety. This study is the result of the seedling and field cold tolerance characteristic tests carried out in 2021 of high yield Tongil-type rice breeding lines. For the cold tolerance characteristic test of seedlings, total 303 high yield rice breeding lines for processing were treated in cold water of 13℃ and irrigation depth of 4cm for 10 days from the third-leaf age, then it was evaluated by comparing the degree of discoloration and withering with the checked varieties(Boramchan, Hanahreum No.2). Also, for the test of field, total 186 high yield rice breeding lines for processing were treated in cold water of 17℃ by keeping pouring day and night from 30 days after transplanting to ripening stage, then it was evaluated by comparing the degree of discoloration, delay of heading, shortening rate of stem length and percent of fertile grain etc. with the checked varieties. And the cold tolerance evaluative criteria were classified as strong(1~3), medium(4~6) and weak(7~9) in overall cold tolerance. (Seedling test) As for the degree of cold tolerance of the check variety, 'Boramchan' and 'Hanahreum No.2' showed a response of 'medium' and 'weak', respectively. However, there was no 'strong' line in the high yield rice breeding lines, 2 lines showed a 'medium' response, and 301 lines showed a 'weak' response. Therefore, except for a few lines(0.7%), most lines(99.3%) showed a 'weak' response. (Field test) In terms of the overall cold tolerance of the check variety, both 'Boramchan' and 'Hanahreum No.2' showed a 'medium' response. Similarly, there was no 'strong' line in the case of high yield rice breeding lines, 20 lines showed a 'medium' response, and 166 lines showed a 'weak' response. Therefore, except for some(10.8%) lines, most(89.2%) lines showed a 'weak' response. From the above results, we selected about 100 individuals with less seed shattering and degeneration of the ear tip, and with a relatively high percent of fertile grain, and are continuing to select lines with improved cold tolerance in the F4~F5 group in this year. As such, most of the Tongil-type rice varieties have poor cold tolerance and thus have low cultivation safety at low temperatures. However, it is important to select improved lines through generational progress because there are some lines that still have a certain level of cold tolerance among them.

  • PDF

펌프제어밸브를 사용한 취수펌프장에서의 수격현상 (Waterhammer for the Intake Pumping Station with the Pump Control Valve)

  • 김경엽;오상현
    • 한국유체기계학회 논문집
    • /
    • 제4권4호
    • /
    • pp.16-21
    • /
    • 2001
  • The field tests on the waterhammer were carried out for PalDang intake pumping station of the metropolitan water supply 5th stage project. The pumping station was equipped with the pump control valve as the main surge suppression device and the surge relief valve as auxiliary. However, the pump control valve had not been early controlled in the planned closing mode, and the slamming occurred to the valve which abruptly closed during the large reverse flow. Because the pressure wave caused by the pump failure was superposed on the slam surge, the upsurge increased so extremely that the shaft of the valve was damaged. It was desirable that the surge relief valve was installed in the pumping station or near the pump exit for the delay of response. After reforming the oil dashpot of the pump control valve, the sliming disappeared and the measured pressure was in fairly good agreement with the results of simulation. In case of three pumps for ${\phi}2,600$ pipeline being simultaneously tripped, the pressure head in the pumping station increased to 95.6 m, and the upsurge caused by the emergency stop of four pumps for ${\phi}2,800$ pipeline was 89.6m. We concluded that the pumping station acquired the safety and reliability for the pressure surge.

  • PDF

실시간신호제어 독립교차로 서비스수준 분석 방법론 (LOS Analysis Frame for COSMOS at Isolated Intersections)

  • 김진태;김강휘;이돈주
    • 대한교통학회지
    • /
    • 제26권4호
    • /
    • pp.161-172
    • /
    • 2008
  • 국토해양부는 신호교차로 서비스수준 분석에 도로용량편람이 제시하는 방법의 적용을 장려하고 있으며 실시간신호제어교차로는 지능형교통체계 구축사업으로 그 숫자가 현장에서 꾸준히 증가하고 있다. 도로용량편람은 정주기식 신호교차로 서비스수준 분석방법에 국한하여 제시하고 있어 현장 실무자들은 실시간신호제어교차로 서비스수준 분석에 어려움을 경험하고 있다. 본 연구는 도로용량편람 수준에서 실시간신호제어교차로 서비스수준 분석의 기초가 되는 방법론을 제안하며 향후 추가로 수행되어야 하는 개발방향을 검토한다. 한 개의 신호교차로를 표본으로 세부 요소모형들을 간이 개발하여 검증한 결과 제안된 방법은 실제 현장 자료와 유사한 수준의 서비스 수준을 추정할 수 있음을 확인하였다.

콤바인의 자동제어(自動制御)에 관한 연구(硏究)(III) -자탈형(自脱型) 콤바인의 탈곡(脱穀)깊이 자동제어(自動制御)- (Automatic Control of the Combine(III) -Automatic Feeding Depth Control of the Head-feed Combine-)

  • 정창주;김상천;남광희
    • Journal of Biosystems Engineering
    • /
    • 제14권2호
    • /
    • pp.94-103
    • /
    • 1989
  • This study was intended to develop the automatic feeding depth control system of the head-feed combine which could feed the rice head into threshing unit at the optimal depth regardless of plant height and uneven ground surface. In the control system, one-board microcomputer was used for the controller instead of conventional electric circuits. Field test of the combine equipped with the control system was conducted to evaluate its overall performance. It was also investigated how the location and time delay of rice head sensor affect the system performance.

  • PDF

수평 배수재로서 순환골재와 쇄석의 활용 방안 (Utilization of Recycled Aggregates and Crushed Stone as Horizontal Drains in Soft Ground)

  • 이달원;임진혁
    • 한국농공학회논문집
    • /
    • 제52권6호
    • /
    • pp.111-123
    • /
    • 2010
  • In this study, laboratory model test on utilization of recycled aggregates and crushed stone as horizontal drains to use alternative material of sand in soft ground is practiced. The coefficient of permeability of the recycled aggregates and crushed stone showed largely 1.2~5.1 times and 2.0~3.3 times greater than sand, respectively. The horizontal coefficient of permeability in case of installing the horizontal perforated drain pipe showed largely 1.9~6.8 times more than the case of not installing. The drainage distance showed 1.7~1.8 times greater than sand. When a degree of consolidation is 90 %, there is no delay of consolidation in SCP and PVD improvement sections. Therefore, it is proven that the field applicability is excellent. Also, the suitable quality management criterion is presented to make use of a horizontal drains in soft ground on the basis of analysis of the physical and environmental characteristics.

An Iterative MUSIC-Based DOA Estimation System Using Antenna Direction Control for GNSS Interference

  • Seo, Seungwoo;Park, Youngbum;Song, Kiwon
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제9권4호
    • /
    • pp.367-378
    • /
    • 2020
  • This paper introduces the development of the iterative multiple signal classification (MUSIC)-based direction-of-arrival (DOA) estimation system using a rotator that can control the direction of antenna for the global navigation satellite system (GNSS) interference. The system calculates the spatial spectrum according to the noise eigenvector of all dimensions to measure the number of signals (NOS). Also, to detect the false peak, the system adjusts the array antenna's direction and checks the change's peak angles. The phase delay and gain correction values for system calibration are calculated in consideration of the chamber's structure and the characteristics of radio waves. The developed system estimated DOAs of interferences located about 1km away. The field test results show that the developed system can estimate the DOA without NOS information and detect the false peak even though the inter-element spacing is longer than the half-wavelength of the interference.

VLBI 상관 서브시스템 본제품의 제작현장 성능시험 (Performance Evaluation of VLBI Correlation Subsystem Main Product)

  • 오세진;노덕규;염재환;;박선엽;강용우
    • 융합신호처리학회논문지
    • /
    • 제12권4호
    • /
    • pp.322-332
    • /
    • 2011
  • 본 논문에서는 한일공동VLBI상관기(Korea-Japan Joint VLBI Correlator, KJJVC)의 핵심 구성시스템인 VLBI상관서브 시스템(VLBI Correlation Subsystem, VCS) 본제품의 1차 성능시험에 대해 기술한다. VCS 본제품의 1차 성능시험의 주요 목적은 현장에 설치하기 전에 제작사에서 다양한 시험항목을 대상으로 시험을 수행하여 문제점을 확인 후 전체 시스템의 완성도를 높이는 것이다. 이번 성능시험에서는 VCS 시작품에서 발견된 FFT 재양자화의 유효비트 부족으로 인한 오버폴로어 문제점을 포함한 기능적인 시험을 수행하였다. 이번 VCS 본제품의 공장시험을 통하여 2008년 VCS 시작품의 성능시험에서 발견한 FFT 의 재양자화 문제점이 완전히 해결되었으며 VCS 본제품에 지연추적, 지연보상, 주파수 묶음 등의 중요 기능도 추가되었다. 그리고 실제 관측 데이터(광대역/협대역)를 이용한 상관처리 시험에서도 예측되는 상관결과가 출력되는 것을 확인하였다.

GNSS관측 공공측량 정확도 분석 및 업무프로세스 제안 (Accuracy Analysis of GNSS-based Public Surveying and Proposal for Work Processes)

  • 배태석
    • 한국측량학회지
    • /
    • 제36권6호
    • /
    • pp.457-467
    • /
    • 2018
  • 공공측량/통합기준점측량 작업규정은 기존 트래버스 측량 작업규정을 준용하고 있으며, GNSS관측 특성을 정확하게 반영하지 않아서 현장 작업과 자료처리에 어려움이 있다. 또한, GNSS관측 자료처리 절차에 대한 규정이 명확하지 않고, 정확도 검증방법 역시 일반적인 기준과 차이가 있다. 본 연구에서는 현재 규정을 분석하고 적절한 업무프로세스를 제안하기 위해 공공기준점 측량과 유사한 시나라오를 바탕으로 짧은 세션(30분) 데이터를 처리했다. 서울특별시 네트워크 RTK (Real Time Kinematic) 기준점에 대해서 3일간 동일한 시간대 결과를 비교했으며, 하루 중 시간에 따른 결과를 비교해서 전반적인 자료처리 정확도를 평가했다. 대류권 지연오차 추정여부에 따른 정확도 차이를 동시에 분석했으며, 추정결과는 24시간 정지측량 결과와 비교했다. 대류층 지연오차를 추정하는 것이 정확도와 좌표안정성 향상에 유리하며, 평균제곱근오차는 대략 평면 5mm, 수직 1cm 수준으로 추정되었다. 본 연구결과를 바탕으로 통합기준점을 포함한 동시관측 일간해를 추정하고, 이를 통합하여 최소제약조건을 통해 최종해를 결정하는 업무프로세스를 제안한다. 이를 위해서는 학술용 자료처리시스템을 이용한 자료처리자동화시스템이 구축되어야하며, GNSS자료처리를 위해 통합기준점과 공공기준점 코드를 표준화해야 한다.

A DEVELOPMENT OF RFID/USN-BASED INTELLIGENT EQUIPMENT FOR CONSTRUCTION SUPPLY CHAIN MANAGEMENT

  • Tae-Hong Shin;Su-Won Yoon;Sangyoon Chin;Soon-Wook Kwon;Yea-Sang Kim;Cheolho Choi
    • 국제학술발표논문집
    • /
    • The 3th International Conference on Construction Engineering and Project Management
    • /
    • pp.472-478
    • /
    • 2009
  • The scopes of the supply chain management in construction projects has expanded from the field management focusing on field storage, transportation, and lifting to the whole supply chain from the materials to field. The expansion of the supply chain management can raise the possibilities of leaner production, which enables shortened lead time of the difficult-to-operate materials, and prevents the work interference or delay. However, the expanded management range requires more information and management than an existing management style currently used for factory production of iron frame, curtain wall, PC, etc. In addition, there are limitations that expand the existing management style into the new supply chain management in construction projects and therefore it is required to automate the existing management style in order to extend the management range. The objective of this study is to propose the process and equipment that can manage the supply chain of the materials which range from the factory production to the field storage based on RFID/USN techniques, introducing small-sized transportation equipment(intelligent pallet), the vehicle tool kit(intelligent trailer), and in-and-out management equipment(Gate Sensor) as a prototype to effectively develop the appliances for operating the proposed process, and present the application possibility of the appliances. The full paper will present then the test results that the proposed appliances for the supply chain management automatically transmit and receive the generated information between the appliances or the appliance and sever under various wireless network circumstances such as zigbee, wibro, Wi-Fi, and CDMA.

  • PDF

CGMMV-CP 형질전환 수박대목의 CGMMV 내성시험 및 계통확보 (CGMMV Tolerance Test of CGMMV-CP Trangenic Watermelon Rootstock and Establishment of Transgenic Line)

  • 박상미;권정희;임미영;신윤섭;허남한;이장하;류기현;한지학
    • Journal of Plant Biotechnology
    • /
    • 제34권1호
    • /
    • pp.11-17
    • /
    • 2007
  • 수박작물의 대목용으로 사용하는 수박공대에 CGiMMV-CP 유전자를 도입하여 개발된 LM 수박공대의 CGMMV 내성 정도를 격리하우스와 노지 포장내에서 조사하였다. 격리온실에서의 $T_{3}$ 형질전환 수박대목의 CGMMV 내성은 접종 후 70일까지 유지되는 반면 대조구는 접종 후 20일에 전부 이병되었다. 인위적 토양전염 포장에서 형질전환체는 접종후71일까지 약 40%의 내성률을 보였으며, 대조구는 접종 후 37일에 모두 이병되었다. 인위적 접촉전염 포장에서 형질전환체는 대조구에 비해 약 10일 정도 지연효과를 보였다. 따라서 CGMMV-CP 형질전환체는 CGMMV에 저항성을 가진 것이 아니라 감염시기를 지연시키는 부분 내성으로 나타났다. CGMMV-CP homozygous T 세대를 진전시켜서 형질전환 수박공대 계통을 $BC_{1}T_{5}$ 세대에서 선발하였다. 또한 LM 수박공대에 형질전환 되지 않은 접수 (슈퍼금천수박)를 접목하여 non-LM 수박을 생산하고 CGMMV-CP 유전자에 관련된 물질의 이동 여부를 조사하였다. PCR, northern, western 분석한 결과 수박공대 대목에서 형성되는 DNA, RNA, protein 물질이 접수로 이동되지 않음을 확인하였다.