• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.868-875
• /
• 2015

In order to replace existing slit type steel plate on the wooden structure joint, the FRP-reinforced laminated plates were produced. Four types of FRP-reinforced laminated plates were produced according to the type of reinforcement and adhesive, and before applying to the joint, the adhesion performance test according to KSF 3021 and KSF 2160 and the Compact Tension (CT) type fracture toughness test specified in ASTM D5045-99 were carried out. As a result of adhesion performance test, all GFRP textile, GFRP sheet, and GFRP Textile-Sheet type FRP-reinforced laminated plates satisfied the requirement of soaking delamination percentage with smaller than 5% based on KS standard. However, aramid type specimen satisfied the standard as the soaking delamination percentage of 4.8% but it did not satisfied the standard as the water proof soaking delamination percentage of 70%. As a result of fracture toughness test, the volume ratio of reinforcement to timber became 23% so that the strength of FRP-reinforced laminated plates increased by two to four times in comparison to the control specimen. It was confirmed that the GFRP Textile-Sheet type specimen was most resistant to the fracture most since the ratio of stress intensity factor compared with that of the control increased to 61% owing to the parallel arrangement of glass fiber to the load. As a result of tensile shear strength test using FRP-reinforced laminated plates and nonmetal dowels, it is about 12% lower than metal connectors.

• Composites Research
• /
• v.36 no.5
• /
• pp.303-309
• /
• 2023

In this paper, a Progressive Damage and Failure Analysis (PDFA) modeling method was developed using ABAQUS/EXPLICIT to predict in-plane damage and delamination for Open-Hole Compression (OHC) testing. The proposed PDFA model was constructed based on Hashin criteria and cohesive behavior. The strength and stiffness of OHC specimens with three types of stacking sequences [(45/-45/0₂)₃]_s , [(45/0/-45/90)₃]_s and [45/-45/0/45/-45/90/(45/-45)₂]_s were compared to comprehensively evaluate the validity of the Finite Element(FE) model of PDFA. The strength and stiffness of the OHC specimens were predicted relatively well, with less than a percentage error 10.0 %. For the numerical simulation case for each layup, the damage initiation/evolution of OHC specimens were evaluated for delamination and tension/compression matrix damage before and after failure.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.123.1-123.1
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.207-208
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.457-458
• /
• 2009

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.05a
• /
• pp.241-252
• /
• 1996

• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.125-130
• /
• 1998

본 논문에서는 부직포를 삽입한 Gr/Ep 복합재료의 충격 흡수 특성을 연구하였다. 계면(interface) 층에 유리 부직포 또는 탄소 부직포를 삽입하여 복합적층판을 제작하였다. 저속충격 시험을 수행하였으며, 충격에 의한 층간분리(delamination)를 C-Scan과 현미경을 사용하여 관찰하였다. 실험결과 계면에 부직포를 삽입함으로써 충격에 의한 층간분리 면적이 감소함을 알 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.41.3-41
• /
• 1998

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.256-257
• /
• 2003

Composite materials are widely used in industry because of its high ration of strength vs. weight, and consequently many nondestructive methods have been developing to find stress or subsurface defects like crack, and delamination inside composite material. Among them, optical inspection methods have been widely neglected because of translucent or opaque nature of composite. (omitted)

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.47-51
• /
• 2015

In this paper, feasibility of dynamic characteristics recovery of delaminated composite structure is numerically studied by using active control algorithm and piezoelectric actuator. Macro-fiber composite(MFC), which has great flexibility and high actuating force, is considered as an actuator in this work. After construction of finite element model for delaminated composite structure based on improved layerwise theory, modal characteristics are investigated and changes of natural frequencies and mode shapes, caused by delamination, are observed. Then, active control algorithm is realized and implemented to system model and control performances are numerically evaluated. Dynamic characteristics of delaminated composite structure are effectively recovered to those of healthy composite structure.