• 기술사
• /
• 제17권4호
• /
• pp.8-14
• /
• 1984

In this part of the studies on dielectric dehydration of foamed fish-starch paste, quality stability and shelflife of the product of which the preparation formula and processing conditions were described in the previous report (Lee et at., 1982) were determined by means of accelerated reaction test. The product was stored for 50 days under the conditions of temperatures at 35, 45, and 55$^{\circ}C$ in steady state and various water activities of 0.44, 0.52, 0.65, and 0.75, respectively. The loss of available lysine, the extent of TBA value, and the development of browning during the storage were measured and reaction kinetically analysed to assess quality stability and shelf-life of the product for the storage at room temperature of 25$^{\circ}C$. The extent of browning was accelerated with the increase of water activity and temperature marking the time to reach a limit of color and flavor deterioration, or to reach brown color density of 0.17 O.D./g at 420nm, 106 days at a$\_$w/=0.44, 35$^{\circ}C$, and 41 days at aw=0.65, 55$^{\circ}C$. These reaction rates resulted in a prediction of shelf-life, 130 to 110 days in the storage at au=0.44 to 0.75, 25$^{\circ}C$. The quality limit assessed by TBA values and sensory evaluation of rancidity was 87 days at a$\_$w/=0.44, 35$^{\circ}C$, and 30 days at aw=0.73, 55$^{\circ}C$ which gave a predicted shelf-life, 128 to 113 days at a$\_$w/=0.44 to 0.75, 25$^{\circ}C$ storage.

• 공업화학
• /
• 제3권3호
• /
• pp.507-515
• /
• 1992

본 연구에서는 소성 dolomite와 수증기계의 열화학 반응을 축열식열교환기에 응용하기 위해 충전층 형태의 실험장치에서 축열 및 방열특성에 관한 연구를 수행하였다. 실험 data는 수화반응온도 $150-400^{\circ}C$, 탈수반응온도 $700-800^{\circ}C$ 및 수증기 유량 294, 430, 567 g/hr의 실험조건에서 얻은 결과이다. 본 연구의 실험범위내에서는 소성 dolomite중 MgO가 수화반응 과정중 수화되지 않음을 알았다. 따라서 소성된 dolomite중 MgO는 불활성 물질로 취급할 수 있다. 또한 율속단계는 충전층의 입구와 벽면으로부터, 출구와 중심쪽으로 반응이 진행되므로 반응율속보다는 열전달율속으로 진행된다고 생각된다.

• 대한화학회지
• /
• 제19권1호
• /
• pp.38-42
• /
• 1975

2-Acetothienone과 chloral을 축합시켜 chloral-2-acetothienone을 생성하였으며 이것을 탈수하여 trichloroethylidene-2-acetohienone을 합성하였다. Trichloroethylidene-2-acetothienone과 phenylhydrazine 또는 치환된 phenylhydrazine들과의 반응으로 2-aryl-6-(2-thienyl)-3(2H)-pyridazinone들을 얻었으며 hydrazine과의 반응에서는 3-(2-thienyl)-5-trichloromethyl-2-pyrazoline이 합성되었다.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.235-241
• /
• 1989

A study on the APCVD(atmospheric pressure chemical vapor deposition) Al2O3 was done by using the aluminum-tri-isopropoxide/N2 reaction system at 40$0^{\circ}C$. When the flow rate of the carrier gas(N2) was over 2SLPM, heterogeneous reaction was observed. However, when the flow rate of the carrier gas was below 2SLPM, a porously deposited film or powder formation was observed. The film formed by a heterogeneous reaction was optically dense. The dense film is thought to be a kind of a hydrated alumina. After a thermal treatment of the film in the range of temperature from $600^{\circ}C$ to 1, 20$0^{\circ}C$, properties of the film seems to be changed due to dehydration and densification process. In the case of the powder on heat treatment(600~1, 20$0^{\circ}C$), both a phase transformation and the change of OH peak was observed.

• 약학회지
• /
• 제52권6호
• /
• pp.514-519
• /
• 2008

We developed a convenient synthetic route to 3-alkylated 2-phenyl-4-quinolone derivatives (4a-h and 5a-c), which were expected to retain antitumor activity. A series of 2,3-dihydro-2-hydroxy-2-phenyl-4-quinolones (3a-h) was synthesized through dehydration, dealcoholation and hydration using acid-catalyzed one-pot reaction from anilines and ethyl benzoylacetates. 3-Methyl (or 3,3-dimethyl)-2-phenyl-4-quinolone derivatives 4 and 5 were synthesized from 3a-h through the methylation using methyl iodide. Formation of quinolone nucleus was undertaken with p-toluenesulfonic acid (p-TSA) at $90{\sim}110^{\circ}C$ in toluene for 3${\sim}$7.5 hr over the Dean-Stark apparatus. The key intermediates in these preparations are ${\beta}$-ketoesters 2a-h, which can be readily obtained from the corresponding anilines 1a-e by reaction with ethyl bezoylacetates.

• 한국재료학회지
• /
• 제34권2호
• /
• pp.79-84
• /
• 2024

Thin films of yttria-stabilized zirconia (YSZ) nanoparticles were prepared using a low-temperature deposition and crystallization process involving successive ionic layer adsorption and reaction (SILAR) or SILAR-Air spray Plus (SILAR-A+) methods, coupled with hydrothermal (175 ℃) and furnace (500 ℃) post-annealing. The annealed YSZ films resulted in crystalline products, and their phases of monoclinic, tetragonal, and cubic were categorized through X-ray diffraction analysis. The morphologies of the as-prepared films, fabricated by SILAR and SILAR-A+ processes, including hydrothermal dehydration and annealing, were characterized by the degree of surface cracking using scanning electron microscopy images. Additionally, the thicknesses of the YSZ thin films were compared by removing diffusion layers such as spectator anions and water accumulated during the air spray plus process. Crack-free YSZ thin films were successfully fabricated on glass substrates using the SILAR-A+ method, followed by hydrothermal and furnace annealing, making them suitable for application in solid oxide fuel cells.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.288-294
• /
• 2009

The platelet AlO(OH) nano colloids were prepared by hydrothermal reaction of the $\gamma-Al_2O_3$ obtained with dehydration of $\gamma$-AlO(OH) and dilute $CH_3COOH$ solution. In hydrothermal reaction process, reversible reaction was accompanied between $\gamma-Al_2O_3$ and AlO(OH), and hydrothermal reaction temperature, hydrothermal reaction time and $CH_3COOH$ concentration had an effect on the crystal structure, surface chemical property, surface area, pore characteristics and crystal morphology of the AlO(OH) nano colloid particles. In this study, it was investigated to the hydrothermal reaction condition of the AlO(OH) nano colloid for using catalyst support, heat resisting agent, adsorbents, binder, polishing agent and coating agent. The crystal structure, surface area, pore volume and pore size of the platelet AlO(OH) nano colloids were investigated by XRD, TEM, TG/DTA, FT-IR and $N_2$ BET method in liquid nitrogen temperature.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.510-515
• /
• 1999

일정농도의 $TiO_2$ 수용액과 일정농도의 KOH 수용액을 반응시켜 $TiO_2$의 가수분해에 의한 Titanium Oxide의 생성 및 생성물의 열처리 조건에 따른 거동을 연구하였다. 열처리 조건은 300~1000$1000^{\circ}C$에서 각각 1시간으로 하였고 각 조건에서 얻어진 생성물의 분석은 XRD, DTA 및 FT-IR에 의하여 연구 검토되었으며 그 결과 다음과 같은 결론을 얻을 수 있었다. \circled1 $90^{\circ}C$의 온도조건에서 초기 가수분해 반응 생성물은 Anatase형 TiO2의 주 peak가 회절각도의 폭이 넓고 강도가 약하게 나타나 준결정질 물질임을 나타내고 있다. \circled2 결정질이 좋지 못한 준정질 산화티탄은 $300^{\circ}C$까지는 Anatase 결정성이 온도와 더불어 좋아지며 $700^{\circ}C$에서 rutile형 TiO2로 상전이 한다. \circled3 alkali pH 영역에서 생성된 K-O-Ti 결합을 형성한 비 결정성 물질은 potasium titanate계의 물질로써 결정화 온도는 630~$640^{\circ}C$ 부근이다. \circled4 비 결정성 K-O-Ti 결합이 공존하는 준결정성 산화티탄은 K-O-Ti 결합물질의 함량이 증가됨에 따라 Anatase로의 결정화 온도가 $300^{\circ}C$에서 50$0^{\circ}C$로 높아지며 또한 rutile형 $TiO_2$로의 상이전도 $700^{\circ}C$에서 $900^{\circ}C$로 높아진다. \circled5 $TiO_4$와 KOH를 사용한 습식법에 의한 Anatase형 $TiO_2$합성조건은 pH 3~pH 5가 가장 바람직하며 열처리 온도는 $300^{\circ}C$에서 가능하다.

• 한국수소및신에너지학회논문집
• /
• 제15권4호
• /
• pp.283-290
• /
• 2004

The single-step process for conversion of syngas to DME give higher conversion than the syngas-to-methanol process. This arises because of a synergy among the three simultaneous reaction, methanol synthesis, methanol dehydration and water gas shift reaction, in the process. we would find the optimal condition of the process which these advantages. The optimal condition of DME synthesis reaction over a commercial $Cu/Zn/Al_2O_3$ catalyst and Hybrid catalyst in a fixed bed reactor. The syngas-to-dimethyl ether conversion was examined on various reaction condition (Temperature 473~553K, $H_2/CO$ ratio 1~3, Pressure 30'50atm, GHSV 1000~4000).

• 약학회지
• /
• 제44권6호
• /
• pp.494-498
• /
• 2000

Noble 7,7'-substituted (or unsubstituted) 4-oxo-1,1',2,2'-dibenzothiazine-3,3'-dicarboxylic acid methyl ester 1,1,1',1'-tetraoxide 3,4'-yl ethers 2a-h were synthesized through the dehydration of 7-substituted (or unsubstituted) 4-hydroxy-1,2-benzothiazine-3-carboxylic acid methyl ester 1,1-dioxides 1a-h using silver(I) oxide for the development of new nonsteroidal antiinflammatory drugs (NSAIDs). Optimal reaction was proceeded through stirring of distilled acetone using 100 mol% of silver(I) oxide at room temperature for 24-68 hrs.