• Journal of Preventive Medicine and Public Health
• /
• v.34 no.4
• /
• pp.363-371
• /
• 2001

Objectives : To assess the degree of quality improvement (QI) implementation and to identify its associated factors. Methods : A mailed questionnaire survey of the QI staffs at hospitals with 400 beds or more was conducted between September 15 and October 30, 2000. Of the 108 hospitals eligible for inclusion in our study, 79 participated, yielding a response rate of 73.1%. After excluding 12 hospitals that did not perform any QI activities, 117 responses from 67 hospitals were used in our analysis. The degree of QI implementation was measured using the Malcolm Baldrige National Quality Award Criteria (MBNQAC). Factors evaluated for association with the degree of QI implementation were cultural, technical, strategic, and structural factors of the hospitals. Results : The average 01 implementation score across the 7 dimensions of MBNQAC was 3.34 on a 5-point scale, with the highest score for the area of customer satisfaction (3.88) followed by information and analysis (3.59) and quality management (3.35). The results of regression analysis showed that hospitals with a ofter information system (p<0.05) and using scientific and systematic problem solving approach (p<0.01) tended to perform a higher degree of QI implementation. While statistically insignificant, positive associations were observed for the factors of group or developmental culture, the degree of employee empowerment, and the use of prospective strategy. Conclusions : It appears that the most important factors contributing to active implementation of QI in Korean hospitals were the use of scientific skills in decision making, and having a quality information system to produce precise and valid information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.85-91
• /
• 2008

When a large sparse matrix is calculated for a horizontal geodetic network adjustment, it needs to go through the process of matrix reordering for the efficiency of time and space. In this study, several reordering methods for sparse matrix were tested, using Sparse Matrix Manipulation System(SMMS) program, total processing time and Fill-in number produced in factorization process were measured and compared. As a result, Minimum Degree(MD) and Mutiple Minimum Degree(MMD), which are based on Minimum Degree are better than Gibbs-Poole-Stockmeyer(GPS) and Reverse Cuthill-Mckee(RCM), which are based on Minimum Bandwidth. However, the method of the best efficiency can be changed dependent on distribution of non-zero elements in a matrix. This finding could be applied to heighten the efficiency of time and storage space for national datum readjustment and other large geodetic network adjustment.

• Education of Primary School Mathematics
• /
• v.25 no.4
• /
• pp.361-375
• /
• 2022

In this study, the vocabularies in elementary mathematics textbooks for grade 1-2 were analyzed according to 9-degree of semantic system. Also, the types of vocabulary were analyzed using general academic words, mathematics specific concept words, and mathematics general concept words. As a result, percentages of 1-degree and 2-degree vocabulary was the most in both grade 1 and 2 mathematics textbooks. It also shows that some of general academic words were 3-degree vocabulary and some of mathematics specific concept words were either unregistered or 1-degree vocabulary. In particular, general academic words, which are 3-degree vocabulary, may be unfamiliar to 1^st and 2^nd grade students. Therefore, students should be given the opportunity to guess and understand the contextual meaning of general academic words from the given contexts in textbooks. The frequency of use of mathematics general concept words in grade 2 textbook increased significantly compared to grade 1 textbook. Since mathematics general concept words are academic and technical vocabulary they should be taught explicitly. Based on the results of this study, implications for vocabulary instruction in mathematics textbooks were discussed.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.12
• /
• pp.13-23
• /
• 2007

Weathered soils appear from the rock and its weathering result. In accordance with the degree of weathering the roch may become soft rock, weathered rock and residual soil. In general, classification method for determining the degree of weathering are performed by chemical method and N-value. But these method have some problems. So, this research is to suggest an appropriate physical method to determine the degree of weathering of weathered soils. A new classification method for determining the degree of weathering is suggested, based upon the results from fall cone test. According to the proposed physical method using fall cone apparatus, the measured values of the samples from the same area show distinctive difference of weathering. For the checking, we selected two areas. As a result, the relationship between CWI and water content according to penetration is expressed as an equation in Ilsan and Incheon area. And it proved to be a good method to determine the degree of weathering.

• Radiation Oncology Journal
• /
• v.19 no.2
• /
• pp.199-204
• /
• 2001

Purpoe : To find the optimal values of total arc degree to protect the normal brain tissue from high dose radiation in stereotactic radiotherapy planning. Methods and Materials : With Xknife-3 planning system & 4 MV linear accelerator, the authors planned under various values of parameters. One isocenter, 12, 20, 30, 40, 50, and 60 mm of collimator diameters, $100^{\circ},\;200^{\circ},\;300^{\circ},\;400^{\circ}C,\;500^{\circ},\;600^{\circ}$ or total arc degrees, and $30^{\circ}\;or\;45^{\circ}$ or arc intervals were used. After the completion of planning, the plans were compared each other using $V_{50}$ (the volume of normal brain that is delivered high dose radiation) and integral biologically effective dose. Results : At $30^{\circ}$ of arc interval, the values of $V_{50}$ had the decreased pattern with the increase of total arc degree in any collimator diameter. At 45 arc interval, up to $400^{\circ}$ of total arc degree, the values of $ V_{50}$ decreased with the increase of total arc degree, but at $500^{\circ}\;and\;600^{\circ}$ of total arc degrees, the values increased. At $30^{\circ}$ of arc interval, integral biologically effective dose showed the decreased pattern with the increase of total arc degree in any collimator diameter. At $45^{\circ}$ arc interval with less than 40 mm collimator diameter, the integral biologically effective dose decreased with the increase of total arc degree, but with n and n mm or collimator diameters, up to $400^{\circ}$ or total arc degree, integral biologically effective dose decreased with the increase of total arc degree, but at $500^{\circ}\;and\;600^{\circ}$ of total arc degrees, the values increased. Conclusion : In the stereotactic radiotherapy planning for brain lesions, planning with $400^{\circ}$ of total arc degree is optimal. Especially, when the larger collimator more than 50 mm diameter should be used, the uses of $500^{\circ}\;and\;600^{\circ}$ of total arc degrees make the increase of$V_{50}$ and integral biologically effective dose. Therefore stereotactic radiotherapy planning using $400^{\circ}$ of total arc degree can increase the therapeutic ratio and produce the effective outcome in the management of personal and mechanical sources in radiotherapy department.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.62-71
• /
• 2000

A mathematical modeling for a magnetic levitation system is proposed using the Taylor series expansion of differential function for obtaining linearity. It is confirmed that this kind of linear approximation method can be used to the modeling of a magnetic levitation system. The two-degree-of-freedom optimal servo system for a constant reference signal is proposed using the LQ optimization technique. An additional state feedback is introduced at the output of the integrator to cancel the integral action for reference signal if there is no modeling error of the plant and no disturbance input to the plant. When the modeling error or the disturbance input exists, the integral effect appears. The system has a free parameter which can b used to tune the effect of the integral compensation.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.69-77
• /
• 2011

In a large scale robot system, one of important problems is software integration, which involves three elements: modularity, reusability and stability. By these issues, the degree of convenience of system integration, its required time and the performance of the system stability can be determined. In addition, the convenience of system management can be determined by the degree of completion of service components. This paper explains the template based service component (TBSC) for the integration of service components in networked robot. The important characteristics of TBSC are automatical execution and recovery process by a PnP supporting robot framework, which helps a system operator to manage a robot system comfortably. For easy implementation and system stability, we provide a service component creator and a verification tool to developers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.1-6
• /
• 2001

Today's paper industry tries to use greater amount of high yield pulp and recycled fiber and to close mill water system, which results in higher fines content and buildup of organic and inorganic contaminants in white water system. Researches are being focused to develop chemical additives that provide good retention and drainage in a closed papermaking system. A microparticle retention system consisted of cationic guar gum and anionic colloidal silica so has been developed to meet the requirements for improving machine speed and product quality. The objective of this investigation was to determine the effects of the degree of cationic guar gums, charge density and structure of anionic colloidal silica sols, and the degree of system closure on the performances of this microparticle retention system. Cationic guar gums and anionic colloidal silica sols with higher charge densities showed better retention performance. Particularly, wider maximum in retention was obtained when structure colloidal silica was used suggesting as mechanism of microparticle bridging is functioning in this system.

• Journal of Power System Engineering
• /
• v.18 no.4
• /
• pp.60-65
• /
• 2014

In this paper, cycle performance analysis for heating capacity, compression work and COP of R134a supercritical heat pump is presented to offer the basic design data for the operating parameters of the system. The operating parameters considered in this study include superheating degree, pressure and outlet temperature of gas cooler, compressor efficiency and evaporating temperature in the R134a supercritical heat pump system. The main results were summarized as follows : Superheating degree, pressure and outlet temperature of gas cooler, compressor efficiency and evaporating temperature of R134a heat pump system have an effect on the heating capacity, compression work and COP of this system. With a thorough grasp of these effect, it is necessary to design the supercritical heat pump using R134a. The prediction for COP of R134a supercritical heat pump have been proposed through multiple regression analysis.

• Journal of Korean Academy of Nursing
• /
• v.29 no.3
• /
• pp.711-720
• /
• 1999

The purpose of this study was to define the content of physiological knowledge needed for clinical nursing practices. Subjects of physiology were classified into 15 areas, and each areas was further classified into subareas, resulting in a total of 194 subareas. The degree of importance of each subarea was measured with a 4-point scale. The subjects of this study were 179 nurses of two university hospitals located in Seoul and Inchon. The results were as follows : 1. The areas of physiology necessary for clinical nursing practice as a basic knowledge in the order of importance were : blood, respiratory system and renal physiology, function of the immune system, body fluid and cardiovascular system, body temperature, endocrine physiology and gastrointestinal physiology However, the degree of importance for reproductive physiology, neuro-physiology, energy and metabolism, cell and cell membrane physiology, muscular physiology and special sense was relatively low. 2. The most important content of physiology for all clinical areas in nursing was blood physiology. However, the degree of importance for each physiology area was different depending on clinical areas. 3. Subareas of physiology as a basic knowledge for clinical practice and education in nursing were blood transfusion, blood type, function of red blood cell, white blood cell and platelet, characteristics and function of hemoglobin, composition and function of plasma protein, and mechanism of blood coagulation and anticoagulation. In conclusion, areas of physiology necessary for clinical nursing practice were blood, respiratory system and renal physiology, function of immune, body fluid and cardiovascular system, body temperature, endocrine physiology and gastrointestinal physiology. However, the degree of importance for each physiology area was different depending on clinical areas In nursing.