• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.391-394
• /
• 2006

Studied that the relationship between the charge density of PAC and its alkalinity, as well as the influences of PAC in paper sizing. Study results showed that PAC with higher charge density brought higher sizing degree when the same amount of $Al_{2}O_{3}$ content was dosed. However, there was no direct relationship between PAC charge density and its alkalinity, and higher PAC alkalinity can't improve its charge density. It was also found that the admixture (PPAC) of polyamine and PAC had higher charge density than PAC. The effects of PPAC on DRS and RAKD sizing were better than PAC sizing, when dosage and other sizing condition were the same.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.56-60
• /
• 2016

Neutral or alkaline papermaking provides many advantages in paper strength and processing conditions. It also provides the opportunity of using calcium carbonate fillers in papermaking. These diverse advantages have made almost all paper machines of printing and writing papers run under neutral and alkaline conditions. On the other hand, linerboard machines, which use recycled papers as a raw material, are running under acid conditions using a rosin sizing system. Because the recycled raw materials used by the linerboard industry contain significant amounts of alkaline papers, the linerboard industry has an interest in the possibility of using the neutral or alkaline papermaking opportunity. In this study, the compatibility of the recycled linerboards under neutral or alkaline papermaking conditions was examined by recycling them under various pH conditions. The sizing degree of the papers recycled under neutral or alkaline was significantly lower than that of acid formed papers indicating that during the neutral or alkaline recycling process the rosin sized papers lost their sizing efficiency. Recycling of acid formed linerboards under neutral or alkaline conditions increased the amount of foam, and the foam contained substantial amount of solid materials derived from the acid sizing systems. Use of cationic polyelectrolytes including PEI and poly-DADMAC improved the sizing degree of the recycled papers under neutral and alkaline conditions. PEI decreased the foam generation as well while poly-DADMAC did not show any reducing effect of the foam. These results suggest that PEI forms coordinate bonds with rosin acid and precipitate them onto the surface of recycled fibers, while the reaction products between poly-DADMAC and rosin acid ions still remain water soluble under neutral or alkaline conditions.

• 펄프종이기술
• /
• 제35권3호
• /
• pp.43-52
• /
• 2003

The new principle to measure a sizing degree by a contact angle was developed using an automatic determination of the 3-end point coordinates of the water droplet on a sheet, which could diminish the operator's bias during measurement. A constant amount of water was first placed on a sample sheet by a water dispenser, and then an image of the liquid droplet was captured by a digital camera and then transmitted to a computer. The program measuring for contact angle extracted a liquid contour by Gaussian function combined with a 8-direction chain code. The Euclidean equation was applied to the binary image of the liquid contour in order to measure the diameter of the contour. Finally, the contact angle of the liquid was calculated by using the diameter and the top coordinates. In addition, a surface free energy of the sample sheet and an elapsed time taken up to the complete absorption into the sheet were simultaneously measured with the contact angle.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.7-11
• /
• 2002

The print quality of a ink jet printer is generally affected by three major components of the printing process: printer, ink formulation, and paper. The result of this study indicated that the surface sized paper with oxidized starch and cationic starch differed ink jet print quality in terms of ink spread and black optical density of the print image. Paper properties, like air permeability and siting degree, which may influence the ink jet printing were also measured. It was found that black print quality was controlled by starch level and ionic charge on the paper surface. Cationic surface sizing starch improved black ink jet print quality.

• Journal of Forest and Environmental Science
• /
• 제12권1호
• /
• pp.45-56
• /
• 1996

일반적으로 AKD는 중성 초지에서 셀룰로오스와의 화학적 결합에 의해 그 효과가 발현 되는 것으로 알려져 있다. 그러나 이 이론에 대한 반대 견해도 많이 발표되었다. 이 연구는 AKD와 셀룰로오스간의 화학적 결합 유무를 확인하기 위해 수행되었다. 특히 종이내에서 셀룰로오스 섬유와 화학 결합을 하고 있는 반응 AKD와 미반응 AKD가 각각 사이즈도에 미치는 영향을 조사하였으며 화학적 결합이 존재한다면 AKD 사이즈 처리된 종이내에서 고온하에 수증기상 전이를 일으킬 수 있는 성분을 조사하였다. 그 밖에 이 연구에서는 초지시 여러 제반 요인들에 의한 AKD의 반응성을 알아 보았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.139-143
• /
• 2001

In manufacturing process of semiconductor package, thermal stress owing to high temperature in moulding and bubbles generated in chip bonding process become main causes to producing void. Therefore, on this study we evaluated quantitatively void size by ultrasonic spectroscopy method which analyze the frequency of this received pulse using pulses with broad band frequency, and after destructive test we verified effectiveness of sizing void by ultrasonic spectroscopy as we find error degree between the real size of void and the sizing void by ultrasonic spectroscopy.

• Current Research on Agriculture and Life Sciences
• /
• 제24권
• /
• pp.55-59
• /
• 2006

This study was carried out to investigate the influence of glycerine on the properties of paper. Two types of glycerine treatment were used. First type, when making handsheets, glycerine was added in the plup slurry. Second type, copying paper was soaked in glycerine solution. Microwave treatment was used for the test of paper degradation. The obtained results were summarized as follows: 1. The glycerin was very effective to improve the property of softness. 2. The glycerine was helpful to increase sizing performance of paper as a fixing agent of sizing emulsion. 3. Curl tester was comparatively useful for the measuring of sizing degree.

• Composites Research
• /
• 제31권6호
• /
• pp.299-303
• /
• 2018

탄소섬유 강화 PA6 복합재료의 탄소섬유-메트릭스간 계면결합력과 반응중합도 향상을 위해서 기존 탄소섬유의 에폭시 사이징제를 디사이징처리하여 에폭시를 제거한 후 우레탄계, 나일론계, 페녹시계 사이징제로 재처리해주었으며, 리사이징처리된탄소섬유의표면을관찰하였다. 리사이징처리된탄소섬유의계면결합력은 IFSS(Interfacial shear strength)를 통해서 확인하였으며, 계면 결합 강도 측정 후 파단면은 주사전자현미경을 통해서 관찰하였다. 나일론계와 페녹시계 사이징제로 처리된 탄소섬유가 우레탄계 사이징에 비해 계면 결합력이 상승한 것을 확인하였다. 우레탄계 리사이징 처리된 탄소섬유는 기존 에폭시 사이징 탄소섬유보다 계면 결합력이 감소한 것으로 확인되었다. 이 결과는 기존 탄소섬유의 저활성과 평활성을 제거하여 탄소섬유와 나일론6 사이의 계면 결합력이 향상된 것으로 판단된다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.227-230
• /
• 2006

The $St{\ddot{o}}ckigt$ sizing test of the most-commonly used sizing tests is easily influenced by the individual testers' bias in recognizing red coloration. Therefore the test had to be modified to improve its reliability and reproducibility by automated recognition of a coloration procedure during testing. In order to achieve this, all measured variables occurring during the $St{\ddot{o}}ckigt$ test was first be analyzed and then reflected in the new automatic system. Secondly, the most important principle applied was to transform the RGB values of the droplet image to hue (H), saturation (S) and value (V) respectively. This is because RGB cannot be used as a color standard, owing to RGB's peculiarity of being seriously affected by the observer's point of view. Therefore, the droplet color had to be separated into three distinct factors, namely the HSV values, in order to allow linear analysis of the droplet color. When the average values of the vectors calculated during color variation from yellow to brown were plotted against time, it was possible to determine the vector value of hue, the most sensitive factor among HSV, at the specific time by differentiation of a function when it exceeds the critical point. Then, the specific time consumed up to the critical point was regarded as the $St{\ddot{o}}ckigt$ sizing degree. The conventional method took more time to recognize an ending point of coloration than the automatic method, and in addition the error ranges of the conventional sizing degrees on the specific addition points of AKD were wider than those of the automatic method.

• 한국의류학회지
• /
• 제33권11호
• /
• pp.1683-1695
• /
• 2009

This study analyzes the production process of eight domestic companies that manufacture scuba diving suits for men with an emphasis on the level of consumer satisfaction in scuba diving suits purchases. One hundred fifty questionnaires were distributed and a total of 140 usable data were coded for further statistical analysis that includes descriptive statistics (frequency and ${\chi}^2$ test) through SPSSWIN 17.0. The results show that a majority of the domestic scuba diving suit companies were either small, manufactured products under original equipment manufacturer (OEM) brands, or were involved in the import business. Many of these companies have developed a local sizing system derived from a company database of customer sizing. As a result, different companies have different sizes that lead to confusion and complication among consumers in selecting the correct size for scuba diving suits. The results indicate that most high-priced diving suits are made of imported fabrics because they had superior quality, fitness, and thickness compared to domestic brands. The degree of consumer satisfaction with scuba diving suits was found to be low in comfort, stuffiness, and activity. Respondents indicated that they felt a little tightness in circumstances such as bust, wrist, and thigh in measurements of circumstances. On the other hand, the respondents showed a high degree of satisfaction with body fitness in scuba diving suits. Further research will clarify a standardized sizing system and develop patterns suitable for Korean men's scuba diving suit body sizes.