• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.2
• /
• pp.58-63
• /
• 1999

Three kinds of papers were prepared from different beating degree of pulps. Physical and optical properties were examined to elucidate the deterioration mechanism of paper according to beating degrees. Changes of double folds, elongation, water retention value, DP, K/S value and visible, UV region light absorption spectra of those papers treated by UV light were studied. Double folds and brightness were decreased more rapidly by UV treatment with increasing of beating degree. The light absorption rates of pulps in visible and UV region were also increased with change of beating level. The formation of new hydrogen bonds and higher light absorption rate of pulps according to beating induced to absorb and interact with much UV light. These phenomena maybe brought about to accelerate paper deteriortion by UV treatment both optical and physical properties.

• Journal of the Korean Home Economics Association
• /
• v.41 no.6
• /
• pp.119-129
• /
• 2003

This study was peformed to establish the standard size system to be required for the production of brassiere. The subject were 155 Korean twenties-aged women and were directly measured anthropometrically. From 27 measurements, 5 factors were extracted through factor analysis. The accumulative contribution ratio is 76.92％. Factor 1 indicates the degree of obesity around the chest, factor 2 is the drooping degree of breast, factor 3 is the contours and prominence, factor 4 is the breast breadth and breadth of bust point, factors 5 is the volume of breast. The subject were classified into 3 cluster as their breast types through cluster analysis. Type 1 is the closest to the ideal breast shape and not too droopy. This group belonged to 75A. Type 2 has small breast and belonged to 70AA group. Type 3 is the obesest and has the biggest and droopy breast. This group belonged to 75B. The distribution of size of brassiere had 3 sections from 70 to 80 showing a rate of 81.94% and the sin of the cup had 4 sections from AAA cup to B cup showing a rate of 89.70％. The production ratio of each brassiere size, it was found that the brassiere size of highest production ratio was 75A(16.39％) in type 1,70AA(16.27%) in type 2, and 75B(13.72％) in type 3. This suggests that it is necessary to adjust for the production rate of brassieres.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.144-157
• /
• 2001

The purpose of this study was to research on breast shape and size to suggest a brassiere sizing chart for elderly women. For this purpose 90 elderly women aged between 55 and 69 were sampled at random to review their breast types by age group, and thereby, suggest the basic measurements and production ratio of each brassiere size in reference to KS K 0070: 1999. The collected measurement data were processed statistically using the SPSS PC/WIN program for technical statistical analysis. The results of this study can be summarized as follows; 1. Analysis of Breast Measurements To find out difference among age groups, the 90 subjects were grouped into three(Group 1 ; aged 55 to 59, Group 2 ; aged 60 to 64, Group 3 ; aged 65 to 69). The results of the comparative analysis of anthropometric data from three groups show that getting older;- Various length measurements related to the drooping degree of breast were increased. It was found that the older group in their 65-69's had more drooping breasts than their 55-59's or 60-64's counterparts. Such findings suggests that older women's drooping can be corrected by a brassiere which serves to support the breasts. 2. Suggestions on a Brassiere Sizing For the basic measurements of brassiere parts for the elderly women, the correlation between underchest circumferences and cup sizes were analyzed. 3% or higher occurrences among the whole sample elderly women were included in the brassiere sizes. thus, the under-chest measurements were set at four intervals from 75 to 95, while the cup measurements were determined also at four intervals from "AAA" to "B" sizes. The resultant 6 sizes excluding the least frequent occurrences covered 73.2% of the sample elderly women actual breast sizes. As a consequence of reviewing the production ratio of each brassiere size for the women, it was found that the brassiere size of highest production ratio was "85A" (17.4%), followed by 80A (14.5%), 85AA 90A (10.1%) and 75A (8.7%) in their order.

• Journal of Cardiovascular Imaging
• /
• v.31 no.4
• /
• pp.180-187
• /
• 2023

BACKGROUND: Two-dimensional (2D) transesophageal echocardiography (TEE) is commonly used for assessing patients undergoing transcatheter atrial septal defect (ASD) device closure. 3D TEE, albeit providing high resolution en-face images of ASD, is used in only a fraction of cases. We aimed to perform a comparative analysis between 3D and 2D TEE assessment for ASD device planning. METHODS: This was a prospective, observational study conducted over a period of one year. Patients deemed suitable for device closure underwent 2D and 3D TEE at baseline. Defect characteristics, assessed separately in both modalities, were compared. Using regression analysis, we aimed to derive an equation for predicting device size using 3D TEE parameters. RESULTS: Thirty patients were included in the study, majority being females (83%). The mean age of the study population was 40.5 ± 12.05 years. Chest pain, dyspnea and palpitations were the common presenting complaints. All patients had suitable rims on 2D TEE. A good agreement was noted between 2D and 3D TEE for measured ASD diameters. 3D TEE showed that majority of defects were circular in shape (60%). The final device size used had high degree of correlation with 3D defect area and circumference. An equation was devised to predict device size using 3D defect area and circumference. The mean device size obtained from the equation was similar to the actual device size used in the study population (p = 0.31). CONCLUSIONS: Device sizing based on 3D TEE parameters alone is equally effective for transcatheter ASD closure as compared to 2D TEE.

• Horticultural Science & Technology
• /
• v.16 no.2
• /
• pp.229-232
• /
• 1998

This study was conducted to determine the properties of seedling plate papers currently used in commercial production, then to get basic information for manufacturing new seedling plate paper. Imported seedling plate paper had high wet tensile and burst strengths in its usage circumstances. Wet tensile strength was very high with 38.7% of dry tensile strength. Wet burst strength was also very high with 62.4% of dry burst strength. The seedling plate paper contained about 30% of synthetic fibers. It had 10 Gurley sec. in air permeability indicating effective movement of air. Seedling plate papers were' made in laboratory scale. For sufficient sizing degree, the addition of 0.5% AKD (alkylketene dimer) by weight was good enough. Additional amount of AKD more than 0.5% by weight caused strength loss even though improving sizing effect. The addition of wet strength reagent such as Finex-B 2% by weight resulted in good strength and air permeability.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.31-35
• /
• 2011

Factors influencing penetration kinetics of PVAm solution into paper were investigated with ultrasonic Penetration Evenness Analyzer (PEA). Paper structure was varied by changing basis weight, freeness of pulp, calendering, number of plies and filler addition and hydrophobicity of paper was varied by adding AKD. Important factors affecting liquid penetration are found to be pore structure and hydrophobicity of paper. Pore structure of paper can be designed by controlling refining degree and filler addition. Hydrophobicity of paper can be controlled by internal sizing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.924-932
• /
• 1995

Concept of the comfort and fitness has become a major concern in the basic function of the ready.made clothes. Until now ready-made clothes were not made by on the basis of the bodytype, but by the body size only This research was performed to classify and characterize the bodytypes of Korean adult males. Sample size was 1290 subjects and their age range was from 19 to 54 years old. 25 variables from the photographic data were applied to analyze the bodytype of trunk. Data were analyzed by the multivariate method, especially factor and cluster analysis. The groups forming a cluster can be subdivided into 5 sets by crosstabulation extracted by the hierarchical cluster analysis. 5 bodytypes classified by the photographic sources could be combined with the anthropometric data and were demonstrated with 5 silhouette. Type 3 and 4 in trunk were dominant and were composed of the majority of 55.6% of the subjects. Bodytypes of Korean males were influenced by the degree of posture erectness and of curvature of the front side of the body in waist and abdomen.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.23-29
• /
• 1999

The effect of dilute sulfuric acid treatment was examined to improve recyclability of coated brokes. Turbidity , electric conductivity , and cationic demand of the white water from coated broke prepared from an alkaline base paper was determined. Sulfuric acid treatment was found to be effective in dissolving undisintegrated substances such as binders, pigments, and fibers. The properties of papers prepared by adding the broke to pulp stock up to 30% dry weight were examined . With the increase of broke addition, retention, sizing degree and smoothness were improved ; on the other hand, formation uniformness, air permeability and internal bonding strength were decreased. The extent of improvement by broke addition was greater for the surfuric acid-treated broke than the control broke. It was concluded that the use of coated broke should be limited within 10-15% weight of the product for either type of broke.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.7 no.1
• /
• pp.42-50
• /
• 1987

Most of significant defects in the pressure boundaries of nuclear power plant we re dispositioned to be monitored periodically every inservice inspection. Due to the difficulty of the defect sizing during operation, it is necessary to develope the continuous flaw monitoring techniques. The Tip Diffraction method, specifically speaking, spot seems to be suitable for flaw monitoring. The optimum conditions of selecting the transducer were 3.5 MHz and 45-57 degree according to compatibility with the defect height. The effective calculation of the defect height was to assume the fact that the incident beam is parallel. This method would be supplemented to ASME method about the defect characterization for the surface flaw.

• The Journal of Korea Robotics Society
• /
• v.3 no.3
• /
• pp.203-211
• /
• 2008

This work proposes structure of spring backbone micro endoscope. For effective surgery in narrow and limited space, many manipulators are developing that different to existed structure. This device can move like elephant nose or snake unlike the existing robots. For this motion, a mechanism that uses spring backbone and wires has been developed. The new type endoscope that has Z axis motion for spring structure, therefore it has 3 degree of freedom, two rotations and one linear motion. And new kinematics for backbone structure is proposed using simple geographic analysis. The Jacobian and stiffness modeling are also derived. Exact actuator sizing is determined using stiffness model. Finally, the proposed kinematics are verified by simulation and experiments.