• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.623-631
• /
• 2008

In this study, with the objects of 173 institutions of university and research institutions, investigation was carried out through visit investigation and questionnaire investigation. Frequency and strength of occurrences was acquired mainly through universities and research institutions which have reported occurrences of accidents to the Ministry of Education, Science, and Technology. Quantitative danger evaluation was conducted through frequency and strength of occurrences. Case study was carried out by selecting bio science laboratory of university and as the result of this study, degree of danger among the inspection objects of bio science laboratories, laboratory work place was evaluated as the most dangerous with the scores of 155.00 and as the result of average danger level, compression gas cylinder was evaluated as the most dangerous with the scores of 6.4000.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.39-46
• /
• 2008

In this study, with the objects of 173 institutions of university and research institutions, investigation was carried out through visit investigation ar d questionnaire investigation. Frequency and severity of occurrences was acquired mainly through universities and research institutions which have reported occurrences of accidents to the Ministry of Education, Science, and Technology. Quantitative danger evaluation was conducted through frequency and strength of occurrences. Case study was carried out by selecting bio science laboratory of university and as the result of this study, degree of danger among the inspection objects of bio science laboratories, laboratory work place was evaluated as the most dangerous with the scores of 155.00 and as the result of average danger level, compression gas cylinder was evaluated as the most dangerous with the scores of 6.4000.

• 해양환경안전학회지
• /
• 제14권1호
• /
• pp.71-76
• /
• 2008

남해안은 우리나라 전체 항만의 입항척수의 58.1%출 차지하며, 위험화물 운반선의 척수를 기준으로 할 경우 68.9%를 차지하여 통항위험에 노출되어 있다. 따가서 남해안 주요항만에 입출항하는 선박의 교통량과 흐름을 조사하여 교통환경스트레스 모델을 적용하여 해역별 위험도를 평가하고, 위험도와 해양사고 및 입출항 척수와의 관계 분석을 통해 주요항만의 문제점과 해결책을 마련할 기초자료를 제시하고자 한다.

• 한국조경학회지
• /
• 제45권4호
• /
• pp.54-61
• /
• 2017

노거수의 보호 및 관리는 도시 유적 보존에 매우 중요하다. 노거수의 위험인자에 대한 위험도를 평가하면 정확한 보호대책을 수립할 수 있다. 본 연구는 노거수의 위험도 평가지표를 개발하기 위하여 델파이 기법을 이용하여 4차례에 걸쳐 설문조사를 실시하고, 관련 분야 전문가의 의견을 수렴하였다. 1, 2차 설문 과정 중에 필요한 지표를 추가하고, 2, 3차에서 중요도, 수렴도, 합의도 등 정상범위 밖에 있는 지표를 제외하였다. 최종 분석 결과, 위험도는 자체노화, 생육환경, 수목병해충, 토양상황, 관리 상태 5개 분야 총 41개 지표가 도출되었다. 연구 결과는 노거수의 위험도를 산정하기 위한 평가지표를 도출하는데 기초자료로 활용될 수 있다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.209-221
• /
• 2009

In the steel industry, steel is manufactured and processed to produce a variety of steel products. The industry provides fundamental materials to the whole range of industries including car, ship, electric appliance and construction industries, so that it is very important as an infrastructure industry. The steel manufacture process involves aerial work, many danger factors caused by the treatment with hazardous gases including BFG and COG and by high pressure gases including H2, O2, N2 and LPG. It requires the management over the large area because many workers work in a plant. The potential dangers in the steel plant were identified and the effect of the danger assessment was verified through the analysis of the danger assessment for the steel plant. The allowed degree of danger was lowered after the improvement through the danger assessment in the plant where the case studies were conducted, which indicates that the danger assessment is highly effective.

• 로봇학회논문지
• /
• 제2권3호
• /
• pp.212-220
• /
• 2007

This paper proposes a method of avoiding obstacles and tracking a moving object continuously and simultaneously by using new concepts of virtual tow point and fuzzy danger factor for differential wheeled mobile robots. Since differential wheeled mobile robot has smaller degree of freedom to control and are non-holonomic systems, there exist multiple solutions (trajectories) to control and reach a target position. The paper proposes 'fuzzy danger factor' for obstacles avoidance, 'virtual tow point' to solve non-holonomic object tracking control problem for unique solution and three kinds of fuzzy logic controller. The fuzzy logic controller is policy decision controller with fuzzy danger factor to decide which controller's result is more valuable when the mobile robot is tracking a moving object with obstacles to be avoided.

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.123-132
• /
• 1991

This study deals with the experiment of perceiving visual information according to the positions of vehicle side mirrors. In the design of vehicle, the consideration of safety is very important. Therefore we consider the positions of side mirrors to use visual information effectively which is important factor to driver. This paper presents the position of side mirror to elevate the degree of visual perception for the circumstances of danger by experiments. To exhibit the circumstances of danger. 4 LED(Light Emitted Diode) art located at each side(right. left front. hack) of vehicle. A subject pushes the LED switch to see that if he perceives the circumstance of danger. To record the circumstance of randomly generated danger, computer interface card is used to control 4 LED and swithch on IBM PC/AT Experiments are divided into 2 parts. The 1st experiment present the independence of right & left side mirror. The 2nd experiment present optimal position of right & left side mirror. The vehicle used in experiment is model EL of H Co.. Statistical process of experimental data using SPSS(Statistical Package for Social Sciences)/PC package concludes that 1) the optimal position of right side mirror is 54cm forward of exist position. 2) for the left side mirror, the position of 120cm forward of exist position shows the worst degree of perception. and the optimal position does not exist in statistical meaning.

• 대한안전경영과학회지
• /
• 제12권1호
• /
• pp.11-18
• /
• 2010

In the steel industry, steel is manufactured and processed to produce a variety of steel products. The industry provides fundamental materials to the whole range of industries including car, ship, electric appliance and construction industries, so that it is very important as an infrastructure industry. The steel manufacture process involves aerial work, many danger factors caused by the treatment with hazardous gases including BFG and COG and by high pressure gases including $H_2$, $O_2$, $N_2$ and LPG. It requires the management over the large area because many workers work in a plant. The potential dangers in the steel plant were identified and the effect of the danger assessment was verified through the analysis of the danger assessment for the steel plant. The allowed degree of danger was lowered after the improvement through the danger assessment in the plant where the case studies were conducted, which indicates that the danger assessment is highly effective.

• 한국재난정보학회 논문집
• /
• 제11권1호
• /
• pp.23-34
• /
• 2015

본 연구에서는 충청북도 내 각 지자체를 대상으로 지역별 대설특성을 통한 잠재적 위험요인을 분석하였다. 분석결과, 35년 평균적설량으로 인한 잠재적 위험도는 제천시와 보은군이 가장 높았으며 35년 최대적설량을 통한 잠재적 위험요인에서는 다른 결과가 도출되는 것을 알 수 있었다. 잠재적 위험요인에 대한 지역의 빈도수를 살펴보면 가장 높은 지역은 보은군, 제천시, 괴산군, 영동군, 청주시 순으로 도출되었다. 본 연구는 일반적인 대설특성 뿐만 아니라 잠재적인 위험요인들을 도출하고 그에 대한 위험도를 제시하였다는 점에서 그 의의를 가진다. 본 연구의 결과는 향후 충청북도 각 지자체들의 제설대응체계 및 방안 마련에 기초자료로 활용할 수 있을 것이다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2007년도 추계학술발표회
• /
• pp.153-155
• /
• 2007