• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.7-14
• /
• 2003

본 연구는 등방성 투수계수를 갖는 점토에 설치된 압밀촉진 케이슨에 관한 선행 연구를 보다 발전시켜서 비등방성 투수계수를 갖는 점토에서의 압밀촉진 케이슨 기초공법의 타당성을 이론적으로 검증하였다. 투수계수의 비등방성을 고려한 2차원 투수 압밀 방정식의 과잉간극수압에 대한 해석해와 시간계수에 따른 평균압밀도 식을 유도하였다. 비등방성 투수계수비가 5, 10, 50인 경우, $\xi$=0.1인 단면에서 평균압밀도 90%에 도달하는 시간은 기존 케이슨에 비해 각각 약 8배, 13배, 47배 단축되었다. 이는 지반의 비등방성 투수계수비가 클수록 압밀촉진 케이슨 기초공법이 압밀에 소요되는 시간을 단축시키는데 효과적임을 의미한다. 또한 본 연구에서는 해석단면의 깊이에 대한 폭의 비 및 비등방성 투수계수비에 따른 전체 해석단면에서의 평균압밀도에 대한 그래프를 제시하였으며, 이를 이용하여 평균압밀침하량을 쉽게 산정할 수 있다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.42-45
• /
• 2000

The properties of thermosetting resins are dependent on the degree of cure and consolidation quality. Since the consolidation process of thermosetting resin matrix fiber composites is much dependent on the viscosity of resin in the composites, in this study, the dissipation factor which is a function of viscosity was measured by the newly developed Lacomtech dielectrometry apparatus and sensors. Using the measured dissipation factors, the relationship between the dissipation factor and degree of cure with respect to environmental temperature was investigated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.349-356
• /
• 1999

In general, the term soft ground includes clayey soils, which have large compressibility and small shear resistance due to the external load. All process of consolidation in compressible soils can be explained in terms of a transfer of load from an incompressible pore-water to a compressible soil structure. Therefore, one of the most important subjects about the characteristics of the time-dependent consolidation of the clay foundation by the change of load may be the presumption of the final settlement caused by consolidation and the degree of consolidation according to the time. The problems of discontinuous layer interface are very important in the algorithm and programming for the analysis of multi-layered soils using a numerical analysis, finite difference method. Better results can be obtained by the Process for discontinuous layer interface, since it can help consolidation analysis to model the actual ground. The purpose of this paper Provides an efficient computer algorithm based on numerical analysis using finite difference method(F.D.M.) which account for multi-layered soils to determine the degree of consolidation and excess pore pressures relative to time and positions more realistically.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.463-468
• /
• 2002

Based on the results obtain from the investigation of Nak-Dong River District, it was classified as very thick, soft soil deposit. Furthermore, during the construction of structures large settlements are expected. Since large settlement affects the structures life, it is very important to accurately determine the consolidation of soil based on the obtained results. In this study piezocone test and laboratory test were performed to determine the consoildtion properties of Nak-Dong River District Pusan, Gyeong-Nam province. Degree of consoildation and the coefficient of consoildation obtained from the data of piezocone test and the results of the Oedometer test were compared and analyzed. Using the results the porewater pressure coefficient($B_q$) was obtained and the relationship with the Plasticity Index was also determined. From the results of this study the effects of the degree of consolidation and consolidation coefficient, and the porewater pressure coefficient and the Plasticity Index was determined.

• 한국농공학회지
• /
• 제18권4호
• /
• pp.4242-4250
• /
• 1976

The determination of the pre-consolidation load known to have a great effect on the consolidation characteristics of the soil have been researched and discussed in detail by many other researchers. A study was undertaken to investigate and compare the effect of pre-consolidation loads on the coefficient of permeability and the consolidation characterisics of soil through the consolidation test on the three types of soil samples. The results of this study are follows; 1. Large compression index is dependent on initial void ratio of the sample being used and the pressure-void ratio curve shows a curved linear relationship in over-consolidated area but a linear relationship in normally consolidated area.2. Settlement-time curve is S-shaped where the pressure is larger than pre-consolidation load and regardless of over-burden pressure, it is a similar straight line respectively in the secondary consolidation area. 3. Primary consolidation ratio of the sample increases almost linearly with the increase of over-burden pressure but the coefficient of volume compressibility decreases linearly with the increase of it. 4. Time factor of a certain degree of consolidation increases with over-burden pressure but the coefficient of consolidation decreases with it in over-consolidated area. There is a linear relationship between them in normally consolidated area. 5. The void ratio of completion point of primary consolidation decreases linearly with over-burden pressure. 6. The coefficient of permeability of sample decreases linearly with over-burden pressure in normally consolidated area, also it increases linearly with increment of the void ratio of the sample.

• 한국농공학회논문집
• /
• 제47권2호
• /
• pp.87-96
• /
• 2005

In this research, an attempt is made to derive the practical estimation of the degree of consolidation in soft clay from field measurements under embankments. For the practical estimation of pore water pressure in soft clay, the elasto-viscous rheological model was proposed, with a transform of parameters and a field geotechnical measurements in southern Korea. By using the rheological properties of soft clays and the dissipation of excess pore water pressure behaviour during step loading, a degree of consolidation or pore water pressure estimation in the future can be performed, and are shown to be generally close to the field measurements of pore water pressure. Finally, a pore water pressure behaviour in soft clay can be explained through measured data in field and the excess pore water pressure data can also be used to estimate settlement.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.875-883
• /
• 2003

Slurry clay has much higher water content than liquid limit of clay and even if small loads apply, it suffers a great settlement. Accordingly it is very difficult to perform a general consolidation test about slurry clay because of high water content. In this study consolidation tests have been performed successfully using Rowe Cell Tester about 1 remolding clay and 3 slurry clays with a water content of 100%, 133% and 150%. From the test results compression index characteristics, secondary compression index characteristics and consolidation coefficient characteristics have been investigated about slurry clay and remolding clay. Also two kinds of theory, by Terzaghi theory and by Mikasa theory, has been used to calculate consolidation coefficients. Compared to the calculation results, they had a similar value of consolidation coefficient. However if Mikasa theory is applied in the field design, the period which reach to the required consolidation degree will be much reduced compared to the period by Terzaghi theory because the time coefficient T$\_$v/ by Mikasa theory is far smaller than T$\_$v/ by Terzaghi theory.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.229-236
• /
• 1997

• 한국지반환경공학회 논문집
• /
• 제10권7호
• /
• pp.43-51
• /
• 2009

본 연구에서는 해안인접지역에 위치하는 연약(해성)점성토지반에서 이루어지는 굴착공사의 조사, 설계 및 연약지반과 굴착공사 시공 중 계측관리를 통하여 수집된 연구지역의 실측데이터를 분석하여, 연약점성토에 사용되는 흙막이벽과 지지공법의 선정 및 적용성, 연약지반 압밀정도에 따른 굴착공사 진행 중 변위크기와 형태 등을 관찰하고 이를 수치해석 결과와 비교하고자 하였다. 이를 위해 본 연구에서는 연구대상지역의 기반시설 확충을 위한 연약지반 처리가 완료되지 않은 상태에서 굴착공사가 진행될 때 발생된 수평변위의 특성을 분석하였으며, 이를 수치해석에 의한 변위량과 정량적인 비교를 통하여 굴착 공사시 연약지반의 압밀도가 수평변위에 미치는 연관성을 규명하였다. 그 결과, 압밀이 완료된 후 굴착공사를 진행하는 경우가 압밀중인 구간에 비하여 평균적으로 60% 이하의 변위만 발생하는 것으로 분석되어졌다.

• 한국지반공학회논문집
• /
• 제39권9호
• /
• pp.25-33
• /
• 2023

효과적인 연약지반 개량을 위해서는 연약지반 위에 구조물의 축조나 성토를 진행할 시 계측활동을 통하여 지반의 거동특성 및 안정관리를 실시하여야 한다. 연약지반의 여러 현장에서 계측관리가 필요하고 그에 따른 침하량 예측방법을 적용할 때 최종침하량의 정확성이 향상된다. 그러나 이는 실제 지반의 거동과 초기 설계 계획과 많은 차이점을 보이고 있다. 이러한 설계상의 문제점을 해결하기 위하여 본 연구에서는 계측자료를 토대로 장기침하량을 예측하는 방법인 쌍곡선법(Hyperbolic method)를 사용하여 연구대상지역인 전남 영암-해남 연약지반의 계측침하량을 분석하였다. 대상지역의 최종 압밀성토가 종료된 시점부터 계측기간별 압밀도의 변화를 통하여 최종침하량을 예측하였으며, 압밀도의 변화에 따른 최종침하량을 유한요소해석과 현장계측값을 비교·분석하였다.