• 대한족부족관절학회지
• /
• 제15권3호
• /
• pp.139-143
• /
• 2011

Purpose: The purpose of this study was to introduce the 'Matrixplasty' for the treatment of a severely incurved toenail with growth plate deformity and to report our results treating this disease entity. Materials and Methods: Between January 2010 and May 2010, 48 consecutive patients (62 cases) underwent treatment of symptomatic incurved toenails with the 'matrixplasty'. The mean period of time at last follow-up was $14.0{\pm}1.3$ months. The recurrence rate and complication rate were evaluated. An American Orthopedic Foot and Ankle Society (AOFAS) forefoot hallux score was assigned and patients were evaluated at pretreatment and the last follow-up meeting. For evaluation of improvement in toenail shape, the center to edge angle of the toenail was measured at pretreatment and last follow-up. Results: All ingrown toenails healed and the nail deformity was corrected within 3 weeks after the procedure. Among the 62 cases, four cases had recurred by the last follow-up. The mean pretreatment AOFAS forefoot hallux score was $73.1{\pm}12.8$, and it improved to $98.7{\pm}1.1$ by the last follow-up (p<0.01). The mean center to edge angle of the toenail improved from $53.3{\pm}12.9$ degrees to $18.2{\pm}7.4$ degrees by the last follow-up (p<0.01). Minor paronychia, which was managed with local wound dressing and oral antibiotics, was identified in eight cases. Conclusion: Matrixplasty showed excellent clinical results in the treatment of severe incurved toenail (pincer nail) and this procedure also showed great improvement of the deformed toenail and its growth plate.

• Archives of Plastic Surgery
• /
• 제33권4호
• /
• pp.480-484
• /
• 2006

Purpose: A lot of surgical techniques were tried to correct extension lag of distal interphalangeal joint. Spiral oblique retinacular ligament reconstruction is the one of correction techniques. Methods: From January 2004 to January 2005, a total of 13 extension lag of distal interphalangeal joint corrections were performed using spiral oblique retinacular ligament reconstruction for 11 patients. After dorsal incision exposing from base of distal phalanx to proximal phalanx, the new ligament(half of lateral band or graft tendon) lies distally at the dorsum of the distal phalanx and passes volarly and proximally along the side of the middle phalanx and anterior and obliquely across the front of the proximal interphalangeal joint to the opposite side of the digit at the proximal phalanx. Results: 5 of 6 mallet finger deformities and 7 swan neck deformities were corrected, which were both extension lag of distal interphalangeal joint and hyperextension of proximal interphalangeal joint. Conclusion: As a result, spiral oblique retinacular ligament reconstruction is an effective and recommendable method for correction of mallet finger deformity and swan neck deformity.

• 척추신경추나의학회지
• /
• 제10권1호
• /
• pp.87-95
• /
• 2015

Background : Charcot Marie Tooth disease can cause muscle weakness and foot deformity. Ankle pain induced by foot deformity affect patients' gait pattern and quality of life. Objectives : The purpose of this study is to evaluate the traditional Korean medicine treatment for ankle pain induced with Charcot-Marie Tooth Disease, especially Chuna manual therapy on ankle joints. Methods : One patient was treated with acupuncture, phamacopuncture, herbal medication and chuna manual therapy on ankle joints. To evaluate the pain of ankle, lower back and lower extremity, visual analog scale(VAS) was measured. Results : After treatment for 5 week, the pain of ankle joint was declined from VAS 6 to VAS 2. Conclusions : Traditional Korean medicine treatment including acupuncture, pharmacopuncture, herbal medication and Chuna manual therapy is effective for ankle pain with foot deformity. But further studies are required to prove the effectiveness of Chuna manual therapy on ankle joints.

• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.155-162
• /
• 2016

Objective: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force ($M_t/F$) in controlled tipping and consequent stresses on the periodontal ligament (PDL). Methods: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations ($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, and $20^{\circ}$) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The $M_t/F$ necessary for controlled tipping ($M_t/F_{cont}$) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. Results: As labial inclination increased, $M_t/F_{cont}$ and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in $M_t/F_{cont}$ and the length of the moment arm. When $M_t/F$ was near $M_t/F_{cont}$, increases in Mt/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. Conclusions: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.

• 대한치과교정학회지
• /
• 제50권3호
• /
• pp.181-187
• /
• 2020

Objective: This study aimed to evaluate the differences in cephalometric characteristics and skeletal maturation in girls with central precocious puberty (CPP) via lateral and hand-wrist radiographs. We also aimed to identify the indicators that are most effective for determining skeletal maturity in these patients. Methods: The study included 70 Korean girls (mean age, 8.5 ± 0.5 years) diagnosed with CPP at the Department of Pediatrics, and 48 normal healthy age-matched girls who visited the Department of Orthodontics and had no history of hormone treatment or growth problems. Skeletal maturation was evaluated using lateral cephalometric and hand-wrist radiographs using cervical vertebrae maturation indicators (CVMI) and skeletal maturity indicators (SMI). Results: The mean mandibular plane angle was smaller in the CPP group than in the control group (35.8° ± 4.9° vs. 39.0° ± 6.5°), resulting in greater posterior facial height (p = 0.003). SMI was significantly greater in the CPP group (3.5 ± 1.4 vs. 2.0 ± 1.0) than in the control group (p = 0.001) and was significantly associated with CPP (r = 0.492; p = 0.001), whereas CVMI was not. Conclusions: In comparison with the control group, the CPP group exhibited a smaller mandibular plane angle, greater posterior facial height, and greater skeletal maturation. SMI may be more suitable than CVMI for determining skeletal maturation in CPP. Hand-wrist radiography is recommended in addition to lateral cephalogram for predicting growth in girls with CPP.

• 대한가정학회지
• /
• 제41권6호
• /
• pp.1-12
• /
• 2003

The purpose of this study were to analyze the anthropometric data of feet of Korean women with aging, to categorize the women's foot shapes, and to compare the shoe size according to the foot shapes in order to provide the basic information for more comfortable shoes. Subjects of this study were 181 women over age 20. They were measured with the direct measurement method and the indirect measurement method. 26 items were measured from the right foot and 6 items were taken on foot outline. Factor analysis, cluster analysis, analysis of variance, post-hoc test, and cross tabs were peformed for statistical analysis of the data by SPSS program. There were significant differences in height items, breadth items, girth items, and angle items by subjects' age. The older subjects' feet were wide and thick with big deformity on toes. The arch height of the older ones was low. This implicates that the degree of deformity on toes, the foot ratio, the foot girth, the foot breath and the arch height as well as the foot length are needed to be considered in developing comfortable shoes. Nine foot construction factors were extracted by the factor analysis of anthropometric measurements; foot size factor, heel and instep factor, malleolus lateralis factor, malleolus medialis factor, foot shape factor, shape of toes factor, heel height factor, big toe height factor, and internal factor. On the basis of the cluster analysis, three different foot shapes were categorized. Type 1 was large and wide foot with little deformity on little toe. Type 2 was medium foot with deformation of big toe, and with the lowest arch height. Type 3 was small and narrow foot with the highest arch height. Distribution of shoe size according to the foot shape was analyzed. The ball of foot breath was of wide distribution than the ball of foot girth. This implicates that girth items and breath items of the foot should be enclosed for the same foot length in the shoe sizing system.

• 대한치과교정학회지
• /
• 제47권3호
• /
• pp.167-175
• /
• 2017

Objective: To evaluate the differences in maxillomandibular transverse measurements at either the crown or the estimated center of resistance (CR), and to compare values between normal occlusion and Class III malocclusion groups. Methods: Dental casts and computed tomography (CT) data from 30 individuals with normal occlusion and 30 with skeletal Class III malocclusions were evaluated. Using the casts, dental arch widths (DAWs) were measured from the cusp tips, and basal arch widths (BAWs-cast) were measured as the distance between the points at the mucogingival junction adjacent to the respective cusp tips. The BAWs determined from CT (BAWs-CT) images were measured from the estimated CRs of the teeth. Results: None of the DAW measurements or maxillomandibular DAW differences showed statistically significant intergroup differences. In contrast, the maxillary BAWs-CT and BAWs-cast were lesser in the Class III malocclusion group than in the normal occlusion group. The mandibular BAWs-CT were significantly greater in the Class III malocclusion group than in the normal occlusion group. Moreover, the maxillomandibular BAW differences on both CT and cast showed significant intergroup differences in all transverse measurements. Conclusions: The maxillomandibular DAW differences showed no significant intergroup differences. In contrast, the maxillomandibular BAW differences on both CT and cast showed significant intergroup differences in all transverse measurements. The maxillomandibular BAW differences at the estimated CRs, measured using CT or casts, can reveal underlying transverse maxillary basal arch deficiencies in patients with skeletal Class III malocclusions.

• Journal of Korean Dental Science
• /
• 제10권2호
• /
• pp.66-73
• /
• 2017

Purpose: To evaluate the effect of different-sized drill tips and laser irradiation times on the initial stability of orthodontic miniscrews placed in Er,Cr:YSGG-laser pre-drilled holes in an animal model. Materials and Methods: Laser pre-drilled holes were made in dog mandibular bone with an Er,Cr:YSGG laser using irradiation times of 5, 7, 9, 11, and 13 seconds, and tip diameters of 0.4 and 0.6 mm. The maximum diameter and depth of the pre-drilled holes was measured with micro computed tomography. The maximum insertion torque was measured during placement the miniscrew. Result: Laser pre-drilled holes were conical shaped. The maximum diameter of pre-drilled holes increased with longer laser irradiation times (P>0.05) and larger tip diameters (P<0.05). The depth of pre-drilled holes increased with longer laser irradiation times and larger tip diameters (P<0.05). When the 0.4 mm tip, but not the 0.6 mm tip, was used, the insertion torque decreased significantly with longer laser irradiation times (P<0.05). Conclusion: Tip diameter impacted insertion torque more than irradiation time. It takes at least 9 seconds using a 0.6 mm tip to create a 0.8 mm diameter and 1.0 mm depth hole in thick cortical bone.

• Archives of Plastic Surgery
• /
• 제36권5호
• /
• pp.637-641
• /
• 2009

Purpose: Most unilateral secondary cleft lip nose deformities have depressed nostril base and sill on the cleft side. To obtain a symmetric nose, correction of the recession on nostril is critical. The authors have worked out effective methods to elevate the nostril of the cleft side according to the extent of the depression. Methods: A total of 115 unilateral secondary cleft lip nose deformity patients with nostril depression were evaluated. Data were acquired from patients' charts and photography with special reference to the height difference of the nostrils between the cleft side and the non - cleft side. Patients were divided into three groups based on the difference and operated with various techniques : (1) mild degree(< 1 mm) with graft, (2) moderate degree(1 ~ 3 mm) with C - flap or suspension suture of septal cartilage (3) severe degree(> 3 mm) with graft, C - flap and suspension suture. Follow - up period averaged 21.3 months. Results: Forty - six patients(40 percent) were in mild group, and forty - two(37 percent) were in moderate. In twenty - seven patients(23 percent), nostril recession was more than 3 mm. The elevated nostril base and sill were maintained without height alteration during follow - up. Conclusion: The symmetry of the nostril base, especially projection of nostril sill influences successful correction of unilateral cleft lip nose deformity. Our tolerable techniques can be applied to most deformities with nostril depression and can present a new guideline.

• Journal of Korean Neurosurgical Society
• /
• 제60권1호
• /
• pp.75-81
• /
• 2017

Objective : Spinal deformity surgery has the potential risk of massive blood loss. To reduce surgical bleeding, the use of tranexamic acid (TXA) became popular in spinal surgery, recently. The purpose of this study was to determine the effectiveness of intra-operative TXA use to reduce surgical bleeding and transfusion requirements in spinal deformity surgery. Methods : A total of 132 consecutive patients undergoing multi-level posterior spinal segmental instrumented fusion (${\geq}5$ levels) were analyzed retrospectively. Primary outcome measures included intraoperative estimated blood loss (EBL), transfusion amount and rate of transfusion. Secondary outcome measures included postoperative transfusion amount, rate of transfusion, and complications associated with TXA or allogeneic blood transfusions. Results : The number of patients was 89 in TXA group and 43 in non-TXA group. There were no significant differences in demographic or surgical traits between the groups except hypertension. The EBL was significantly lower in TXA group than non-TXA group (841 vs. 1336 mL, p=0.002). TXA group also showed less intra-operative and postoperative transfusion requirements (544 vs. 812 mL, p=0.012; 193 vs. 359 mL, p=0.034). Based on multiple regression analysis, TXA use could reduce surgical bleeding by 371 mL (37 % of mean EBL). Complication rate was not different between the groups. Conclusion : TXA use can effectively reduce the amount of intra-operative bleeding and transfusion requirements in spinal deformity surgery. Future randomized controlled study could confirm the routine use of TXA in major spinal surgery.