• Journal of the Korea Convergence Society
• /
• v.13 no.2
• /
• pp.249-255
• /
• 2022

This study proposed an analysis framework for real-time prediction of CNC processing defects using machine learning-based models that are recently attracting attention as processing defect prediction methods, and applied it to CNC machines. Analysis shows that the XGBoost, CatBoost, and LightGBM models have the same best accuracy, precision, recall, F1 score, and AUC, of which the LightGBM model took the shortest execution time. This short run time has practical advantages such as reducing actual system deployment costs, reducing the probability of CNC machine damage due to rapid prediction of defects, and increasing overall CNC machine utilization, confirming that the LightGBM model is the most effective machine learning model for CNC machines with only basic sensors installed. In addition, it was confirmed that classification performance was maximized when an ensemble model consisting of LightGBM, ExtraTrees, k-Nearest Neighbors, and logistic regression models was applied in situations where there are no restrictions on execution time and computing power.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.1
• /
• pp.81-91
• /
• 2012

The purpose of this study was to analyze judicial precedents related on landscape construction defects(JPLCD) and suggested the improvement plan for dealing with it. The results are as the following: 1. Landscape construction defects litigations have been increased so far since 2000 and the duration of original trial was approximately 603 days, while appeal trials took up to 550 days. Therefore, the analysis revealed that settlement of disputes were lengthy and wasteful to consumers and constructors. 2. Judgement's cost accepted by the judge was only 53.6% of appraisal's cost appraised by appraiser, therefore it revealed appraiser overestimated the repair cost of landscape construction defects. 3. According to work classification categorized by Landscape Construction Standard Specification(2008) of the Korean Institute of Landscape Architecture, landscape planting amounted to 75% of JPLCD and plaintiff(consumers)'s prevailing rate of it reached 77% to be a serious burden to constructors. 4. According to JPLCD categorized by the type of dispute, defects caused by consumer's negligence for maintenance amounted to 29% and defendant(constructors)'s prevailing rate of it reached 64% to be the main responsibility of consumers. Further study will be required to make the judge standard of landscape construction defects through legal and technical research.

• Archives of Reconstructive Microsurgery
• /
• v.6 no.1
• /
• pp.96-102
• /
• 1997

The gracilis that is frequently used as a donor of free muscle trasfer is appropriate in the muscular shape and vascular position. This muscle is belonged to the second type of muscle group by the classification of the pattern of muscular nutrient vessel. The adductor branch or first perforating branch of deep femoral artery which supplies the proximal 1/3 of this muscle is a dominant one and this is used for the microscopic anastomosis of muscle or musculocutaneous flap. The minor vascular pedicles which enter the distal 1/3 of this of this muscle are branches of the superficial femoral artery and it is 0.5mm in diameter, 2cm in length with two venae comitantes. These minor pedicles supplies distal half of the gracilis muscle. This island musculocutaneous flap using distal vascular pedicle can be used to cover the defect of soft tissue around the distal femoral supra-condylar area, knee joint and proximal tibial condyle area which cause limitation of motion of knee joint, or in the cases that usual skin graft is impossible. The important operative procedure is as follows; The dissection is carried proximally and distally and the entire gracilis muscle including proximal and distal pedicle is completely dissected. After temporary blocking of the proximal vascular pedicle, the adequate muscle perfusion by the distal pedicle is identified and it is rotated to the recipient site around knee joint. The advantages of this procedure are simple, no need of microscopic vascular anastomoses and no significant functional loss of donor site. Especially in the cases of poor condition of the recipient vessel, this procedure can be used effectively. From 1991 to 1996, we performed 4 cases; complete survival of flap in 3 cases and partial survival of flap with partial necrosis in 1 case. This procedure is though to be useful in the small sized soft tissue defect of distal femoral supra-condylar area, knee joint and proximal tibial condylar area, especially in the defect of anterior aspect which expected to cause limitation of motion of knee joint due to scar contracture. But the problems of this procedure are the diameter of distal vascular pedicle is small and the location of distal vascular pedicle is not constant. To reduce the failure rate, identify the muscular perfusion of distal vascular pedicle after blocking the proximal pedicle, or strategic delay will be helpful.

• Journal of Chest Surgery
• /
• v.12 no.3
• /
• pp.281-288
• /
• 1979

For years, physicians and anatomists have been interested in the heart that has one functioning ventricle. Various terms have been suggested for this entity including single ventricle, common ventricle, double-inlet left ventricle, cor biatriatum triloculare, and primitive ventricle. In this report, the term "single ventricle" is utilized as suggested by Van Praagh, and is defined as that congenital cardiac anomaly in which a common or separate atrioventricular valves open into a ventricular chamber from which both great arterial trunks emerge. An outlet chamber, or infundibulum, may or may not be present and give rise to the origin of either of the great arteries. This definition excludes the entity of mitral and tricuspid atresia. An 11 year old cyanotic boy was admitted chief complaints of exertional dyspnea and frequent upper respiratory infection since 2 weeks after birth. He was diagnosed as inoperable cyanotic congenital heart disease, and remained without any corrective treatment up to his age of 11 year when he suffered from aggravation of symptoms and signs of congestive heart failure for 2 months before this admission. On 22nd of May 1979, he was admitted for total corrective operation under the impression of tricuspid atresia suggested by a pediatrician. Physical check revealed deep cyanosis with finger and toe clubbing, and grade V systolic ejection murmur with single second heart sound was audible at the left 3rd intercostal space. Development was moderate in height [135 cm] and weight[28Kg]. Routine lab findings were normal except increased hemoglobin [21.1gm%], hematocrit [64 %], and left axis deviation with left ventricular hypertrophy on EKG. Cardiac catheterization and angiography revealed 1-transposition of aorta, pulmonic valvular stenosis, double inlet of a single ventricle with d-loop, and normal atriovisceral relationship [Type III C solitus according to the classification of Van Praagh]. At operation, longitudinal incision at the outflow tract of right ventricle in between the right coronary artery and its branch [LAD from RCA] revealed high far anterior aortic valve which had fibrous continuity with mitral annulus, and pulmonic valve was stenotic up to 4 mm in diameter positioned posterolaterally to the aorta. Ventricular septum was totally defective, and one markedly hypertrophied moderator band originated from crista supraventricularis was connected down to the imaginary septum of the ventricular cavity as a pseudoseptum of the ventricle. Size of the defect was 3X3 cm2 in total. Patch closure of the defect with a Teflon felt of 3.5 x 4 cm2 was done with interrupted multiple sutures after cut off of the moderator band, which was resutured to the artificial septum after reconstruction of the ventricular septum. Pulmonic valvotomy was done from 4 mm to 11 mm in diameter thru another pulmonary arteriotomy incision, and right ventriculotomy wound was closed reconstructing the right ventricular outflow tract with pericardial autograft of 3 x 4 cm2. Atrial septal defect of 2 cm in diameter was closed with 3-0 Erdeck suture, and atrial wall was sutured also when rectal temperature reached from 24`C to 35.5`C. Complete A-V block was managed with temporary external pacemaker with a pacing rate of 110/min. thru myocardial wire, and arterial blood pressure of 80/50 mmHg was maintained with Isuprel or Dopamine dripping under the CVP of 25-cm saline. Consciousness was recovered one hour after the operation when his blood pressure reached 100 /70 mmHg, but vital signs were not stable, and bleeding from the pericardial drainage and complete anuria were persisted until his heart could not capture the pacemaker impulse, and patient died of low output syndrome 320 min after the operation.

• Journal of Chest Surgery
• /
• v.12 no.3
• /
• pp.289-296
• /
• 1979

For years, physicians and anatomists have been interested in the heart that has one functioning ventricle. Various terms have been suggested for this entity including single ventricle, common ventricle, double-inlet left ventricle, cor biatriatum triloculare, and primitive ventricle. In this report, the term "single ventricle" is utilized as suggested by Van Praagh, and is defined as that congenital cardiac anomaly in which a common or separate atrioventricular valves open into a ventricular chamber from which both great arterial trunks emerge. An outlet chamber, or infundibulum, may or may not be present and give rise to the origin of either of the great arteries. This definition excludes the entity of mitral and tricuspid atresia. An 11 year old cyanotic boy was admitted chief complaints of exertional dyspnea and frequent upper respiratory infection since 2 weeks after birth. He was diagnosed as inoperable cyanotic congenital heart disease, and remained without any corrective treatment up to his age of 11 year when he suffered from aggravation of symptoms and signs of congestive heart failure for 2 months before this admission. On 22nd of May 1979, he was admitted for total corrective operation under the impression of tricuspid atresia suggested by a pediatrician. Physical check revealed deep cyanosis with finger and toe clubbing, and grade V systolic ejection murmur with single second heart sound was audible at the left 3rd intercostal space. Development was moderate in height [135 cm] and weight[28Kg]. Routine lab findings were normal except increased hemoglobin [21.1gm%], hematocrit [64 %], and left axis deviation with left ventricular hypertrophy on EKG. Cardiac catheterization and angiography revealed 1-transposition of aorta, pulmonic valvular stenosis, double inlet of a single ventricle with d-loop, and normal atriovisceral relationship [Type III C solitus according to the classification of Van Praagh]. At operation, longitudinal incision at the outflow tract of right ventricle in between the right coronary artery and its branch [LAD from RCA] revealed high far anterior aortic valve which had fibrous continuity with mitral annulus, and pulmonic valve was stenotic up to 4 mm in diameter positioned posterolaterally to the aorta. Ventricular septum was totally defective, and one markedly hypertrophied moderator band originated from crista supraventricularis was connected down to the imaginary septum of the ventricular cavity as a pseudoseptum of the ventricle. Size of the defect was 3X3 cm2 in total. Patch closure of the defect with a Teflon felt of 3.5 x 4 cm2 was done with interrupted multiple sutures after cut off of the moderator band, which was resutured to the artificial septum after reconstruction of the ventricular septum. Pulmonic valvotomy was done from 4 mm to 11 mm in diameter thru another pulmonary arteriotomy incision, and right ventriculotomy wound was closed reconstructing the right ventricular outflow tract with pericardial autograft of 3 x 4 cm2. Atrial septal defect of 2 cm in diameter was closed with 3-0 Erdeck suture, and atrial wall was sutured also when rectal temperature reached from 24`C to 35.5`C. Complete A-V block was managed with temporary external pacemaker with a pacing rate of 110/min. thru myocardial wire, and arterial blood pressure of 80/50 mmHg was maintained with Isuprel or Dopamine dripping under the CVP of 25-cm saline. Consciousness was recovered one hour after the operation when his blood pressure reached 100 /70 mmHg, but vital signs were not stable, and bleeding from the pericardial drainage and complete anuria were persisted until his heart could not capture the pacemaker impulse, and patient died of low output syndrome 320 min after the operation.

• Journal of Chest Surgery
• /
• v.46 no.5
• /
• pp.340-345
• /
• 2013

Background: This study aims to evaluate whether or not the method of right vertical axillary minithoracotomy (RVAM) is preferable to and as reliable as conventional sternotomy surgery, and also assesses its cosmetic results. Methods: Thirty-three patients (7 males, 26 females) with atrial septal defect were admitted to the Cardiovascular Surgery Clinic of Cukurova University from December 2005 until January 2010. The patients' ages ranged from 3 to 22. Patients who underwent vertical axillary minithracotomy were assigned to group I, and those undergoing conventional sternotomy, to group II. Group I and group II were compared with regard to the preoperative, perioperative and postoperative variables. Group I included 12 females and 4 males with an average age of $16.5{\pm}9.7$. Group II comprised 14 female and 3 male patients with an average age of $18.5{\pm}9.8$ showing similar features and pathologies. The cases were in Class I-II according to the New York Heart Association (NYHA) Classification, and patients with other cardiac and systemic problems were not included in the study. The ratio of the systemic blood flow to the pulmonary blood flow (Qp/Qs) was $1.8{\pm}0.2$. The average pulmonary artery pressure was $35{\pm}10$ mmHg. Following the diagnosis, performing elective surgery was planned. Results: No significant difference was detected in the average time of the patients' extraportal circulation, cross-clamp and surgery (p>0.05). In the early postoperative period of the cases, the duration of mechanical ventilator support, the drainage volume in the first 24 hours, and the hospitalization time in the intensive care unit were similar (p>0.05). Postoperative pains were evaluated together with narcotic analgesics taken intravenously or orally. While 7 cases (43.7%) in group I needed postoperative analgesics, 12 cases (70.6%) in group II needed them. No mortality or major morbidity has occurred in the patients. The incision style and sizes in all of the patients undergoing RVAM were preserved as they were at the beginning. Furthermore, the patients of group I were mobilized more quickly than the patients of group II. The patients of group I were quite pleased with the psychological and cosmetic results. No residual defects have been found in the early postoperative period and after the end of the follow-up periods. All of the patients achieved functional capacity per NYHA. No deformation of breast growth has been detected during 18 months of follow-up for the group I patients, who underwent RVAM. Conclusion: To conclude, the repair of atrial septal defect by RVAM, apart from the limited working zone for the surgeon in these pathologies as compared to sternotomymay be considered in terms of the outcomes, and early and late complications. And this has accounted for less need of analgesics and better cosmetic results in recent years.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.7
• /
• pp.7-15
• /
• 2020

Recently, the fourth industrial revolution has been presented as a new paradigm and additive manufacturing (AM) has become one of the most important topics. For this reason, process monitoring for each cross-sectional layer of additive metal manufacturing is important. Particularly, deep learning can train a machine to analyze, optimize, and repair defects. In this paper, image classification is proposed by learning images of defects in the metal cross sections using the convolution neural network (CNN) image labeling algorithm. Defects were classified into three categories: crack, porosity, and hole. To overcome a lack-of-data problem, the amount of learning data was augmented using a data augmentation algorithm. This augmentation algorithm can transform an image to 180 images, increasing the learning accuracy. The number of training and validation images was 25,920 (80 %) and 6,480 (20 %), respectively. An optimized case with a combination of fully connected layers, an optimizer, and a loss function, showed that the model accuracy was 99.7 % and had a success rate of 97.8 % for 180 test images. In conclusion, image labeling was successfully performed and it is expected to be applied to automated AM process inspection and repair systems in the future.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.6
• /
• pp.588-593
• /
• 2006

Cyst is pathologic disease develops in hard tissue as well as soft tissue, which is lined by epithelium filled with liquid, semi-liquid, or air. Origins and symptoms of the cyst are various according to region, and symptoms are malocclusion, diversion of root, tooth mobility, periapical swelling, discoloration and lesion expansion, because the odontogenic cysts begin in the numerous rests of odontogenic epithelium. But almost cysts produce no symptoms unless secondary infection occurs. Treatment of small cysts may include extraction, endodontic therapy, and apical surgery. Treatment of a large cysts usually involves surgical removal (enucleation), Marsupialization(a method of decompression) or combination of two before mentioned. Bone graft is done for helping of bone defect healing at the same time of enucleation This clinical research from January 2000 to December 2005, analyzed by the age, sex, classification, size, region, treatment method, whether or not of bone graft of cyst in the jaw in Daegu Catholic University Hospital.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.2
• /
• pp.133-139
• /
• 2006

Purpose: To evaluate the results of mosaicplasty and microfracture after surgical treatments for symptomatic osteochondral lesion of talus (OLT) by second-look arthroscopy. Materials and Methods: 7 cases of mosaicplasty and 7 cases of microfracture were reviewed who undertook second-look arthroscopy at 6 months or one year after undertaking mosaicplasty or microfracture for OLT between December 2004 and October 2005. The mean age at first operation was 43.6 years (Range, 20-59) (Mosaicplasty; 43.9 years, Microfracture; 43.4 years). The mean size of cartilage defect was $15.0{\times}7.7\;mm$ in mosaicplasty and $7.1{\times}6.6\;mm$ in microfracture. Clinical outcomes were evaluated by Freiburg ankle score. Cartilage healing state was evaluated by Insall's classification for chondromalasia during second-look arthroscopy. Results: By the Freiburg ankle score, 9 ankles (6 in mosaicplasty, 3 in microfracture) had excellent and 5 (1 in mosaicplasty, 4 in microfracture) had good results at the times of second-look arthroscopy. By Insall's classification, consistency of the osteochondral grafts and congruity between grafts and native cartilage (Grade I) were shown in 9 (6 ankles in mosaicplasty, 3 ankles in microfracture), a fissuring (Grade II) in one ankle of mosaicplasty, a fasciculation (Grade III) in one ankle of microfracture, and partial exposure of subchondral bone (Grade IV) in 3 ankles of microfractures. Conclusion: Mosaicplasty was more excellent in consistency and hardness of cartilage than microfracture. In some cases of microfracture, cartilage healing was incomplete at 6 months postoperatively, so second-look arthroscopy is necessary to identify. If incomplete cartilage healing was shown, additional procedure such as microfracture or mosaicplasty was needed.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.47-54
• /
• 1995

This study was to measure the properties of logs and classify them by non-destructive methods. The purpose of this experiment was focused at mensurability of logs by non-destructive methods. The non-destructive instrument, Stress-Wave Timer 239A which was made by Metriguard in U.S.A., was used. The stress wave velocities of log's cross direction were measured and compared with three different methods; 1. with hammer, 2. with hammer and D.B.H. meter, 3. with manufactured instrument. Number of used logs were seven logs, which were classified by naked eye into six groups; very severe rot, severe rot, mild rot & knot, mild rot & check, mild rot, sound log, and in diameter were into three groups; large(57.4cm), medium(36~41.2cm), small(28.9cm) log. The results, which were classified by mensurability with non-destructive methods, were followed; 1. The stress wave velocities were very different between rot and sound log. So it meant the possibility of mensurability of logs by non-destructive method even if high standard error. 2. The stress wave velocities decreased with checks more than with rots, which meant the checks affected speeds more. 3. The stress wave velocities increased with knot. 4. The velocities with manufactured instrument showed lower standard error, so more accurate results than other methods. Especially the required labour decreased from 3~4 to 2 persons. 5. Finally, the mensurability showed more accurate results and made the classification of logs scientific.