• Journal of Periodontal and Implant Science
• /
• v.44 no.6
• /
• pp.300-306
• /
• 2014

Purpose: A laterally positioned flap (LPF) combined with a subepithelial connective tissue graft (SCTG) is one of the conventional approaches for resolving gingival recession defects, with the advantages of flap flexibility and extended coverage of the tissue graft. However, thus far, evidence is lacking for the use of this technique for the treatment of advanced gingival recession defects. This report discusses three Miller class III cases with interproximal bone loss and wide and deep defects treated with a combination procedure of a modified laterally positioned flap (mLPF) and SCTG. Methods: mLPF combined with SCTG was performed for each case. The defect size and the degree of hypersensitivity at baseline and the final appointment in each case were documented. Results: The three cases had a mean initial defect of $7.7{\pm}1.5mm$ and a mean residual defect of $1.7{\pm}1mm$ at the 6-, 3-, and 36-month follow-up, respectively, after the root coverage surgery. The symptom of hypersensitivity was improved, and the patients were satisfied with the clinical outcomes. Conclusions: The results demonstrated that the combination of mLPF with SCTG is promising for treating these advanced cases with respect to obtaining the expected root coverage with the gingival tissue.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.629-635
• /
• 2011

Retentions are generally considered to be intended to act as a powerful tool to incentivize contractors/subcontractors to remedy defective work in cases of non-performance. This study attempts to establish the extent to which retentions can be used for this purpose by investigating case law connected with insurance and defective work. One of the significant questions is whether retentions are sufficient to deal with construction defects or value of retentions in the rectification of defects is illusory. The cost to repair a defect may vary depending on a number of components including type, cause, magnitude and the construction stage at which the defect occurs. It is expected that a review of existing cases on defective workmanship will provide an insight on the issues and whether retentions are effective in their intended function. In order to establish their functionality, the study described in this paper investigated 6 construction insurance cases to identify the critical issues and the causes of dispute. It was found that the nature and the cause of defects were different in each case. It was also established that certain defect types not covered by insurance may be covered by retentions - potentially one of the key uses of a retention strategy. It is expected that the findings will assist in forming a view on the quantum of money that may be required paving the way for a first time understanding on a rational basis for setting up retention regime.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.73-79
• /
• 2012

In this paper, we study on how to determine the number of hidden layer neurons in neural network for predicting defect size of steam generator tube. It was reported in the literature that the number of hidden layer neurons can be efficiently determined with the help of cross-validation. Although the cross-validation provides decent estimation performance in most cases, the performance depends on the selection of validation set and rather poor performance may be led to in some cases. In order to avoid such a problem, we propose to use multifold cross-validation. Through the simulation study, it is shown that the estimation performance of defect width (defect depth, respectively) attains 94% (99.4%, respectively) of the best performance achievable among the considered neuron numbers.

• Archives of Reconstructive Microsurgery
• /
• v.14 no.1
• /
• pp.50-56
• /
• 2005

There are limited treatment options in the reconstruction of the very large defect in the metaphyseal portion of distal femur and proximal tibia. Fibula is one of the most popular donor of the long bone reconstruction in reconstructive microsurgical field. It has many advantages such as very strong strut tubular bone, very reliable vascular anatomy with large vascular diameter and long pedicle. There are limited donor site problems such as transient peroneal nerve dysfunction. In those situations with the huge long bone defects in distal femur or proximal tibia, the defective bony shape and strength of the transplanted fibular bone is not enough if only one strut of the fibula is transferred. We performed 7 cases of "doule barrel" fibular transplantation on the metaphyseal portion of distal femur and proximal tibial large defects in which it is very difficult to fill the bony gap with conventional bone graft or callotasis methods. It takes averaged 8.3 months since that procedure to obtain bony union. After solid union of the transferred double barrelled fibular graft. There were no stress fracture in our series. So we can propose double barrel fibular graft is useful method in those cases with very large bone defect on the metaphysis of large long bone.

• Archives of Reconstructive Microsurgery
• /
• v.23 no.1
• /
• pp.13-17
• /
• 2014

Purpose: Soft tissue defect on foot and ankle is vulnerable and requires a thin flap for improvement of aesthetic and functional results. Lateral supramalleolar flap is a simple and fast procedure, which can preserve and supply reliable constant blood flow, and causes fewer donor site complications. The authors reviewed our cases and report the clinical results. Materials and Methods: Ten cases of soft tissue defects on the lower leg, around the ankle were treated with lateral supramalleolar flap. There were seven males and three females with a mean age of 54.8 years. The mean size of flaps was $5.9{\times}6.3$ cm and the mean follow-up period was 23 months. Flap survival and postoperative complications were evaluated. Results: Nine flaps survived completely without loss of flap. There was one case of partial wound dehiscence requiring debridement and repair, and another case of necrotic flap change requiring partial bone resection and closure. All patients were capable of weight bearing ambulation at the last follow up. Conclusion: The authors suggest that the lateral supramalleolar flap could be a useful option for treatment of soft tissue defect around the ankle joint.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.141-144
• /
• 2016

The aim of this report is to present two cases of canalis basilaris medianus as identified on cone-beam computed tomography (CBCT) in the base of the skull. The CBCT data sets were sent for radiographic consultation. In both cases, multi-planar views revealed an osseous defect in the base of the skull in the clivus region, the sagittal view showed a unilateral, well-defined, non-corticated, track-like low-attenuation osseous defect in the clivus. The appearance of the defect was highly reminiscent of a fracture of the clivus. The borders of osseous defect were smooth, and no other radiographic signs suggestive of osteolytic destructive processes were noted. Based on the overall radiographic examination, a radiographic impression of canalis basilaris medianus was made. Canalis basilaris medianus is a rare anatomical variant and is generally observed on the clivus. Due to its potential association with meningitis, it should be recognized and reported to avoid potential complications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.3
• /
• pp.214-219
• /
• 1995

Free grafting of oral mucosa for minor oral reconstruction was first described by Propper in ridge extension surgery. Situation calling for mucosal grafting procedures may relate to periodontal surgery, minor and major preprosthetic surgery, implant surgery, reconstruction in deformity cases after trauma, congenital cleft, gross atrophy and ablative tumor surgery. In the cases of 9 patients with mucosal defect of intraoral or orbital cavity after wide excision of tumor, preprosthetic surgery, and orbitoplasty, full-thickness mucosal graft were used to close a large defect. Four patients received buccal mucosal graft for preprosthetic surgery or orbitoplasty, one patient had benign tumor and the others had malignant tumors located on the palate or upper alveolus. Buccal mucosal graft donor site morbidity and trismus were minimal and healing of surgical defect was satisfactory. So we present the case with review of literatures.

• Archives of Plastic Surgery
• /
• v.50 no.5
• /
• pp.478-487
• /
• 2023

Background The outcome of alveolar grafting with synthetic bone substitute (Osteon III) in various bone defect volumes is highlighted. Methods A prospective study was accomplished on 55 patients (6-13 years of age) with unilateral alveolar bone cleft. Osteon III, consisting of hydroxyapatite and tricalcium phosphate, is used to reconstruct the defect. Alveolus defect diameter was calculated before surgery (V1), after 3 months (V2), and finally after 6 months (V3) postsurgery. In the t-test, a significant difference and correlation between V1, V2, and V3 are stated. A p-value of 0.01 is considered a significant difference between parameters. Results The degree of cleft is divided into three categories: small (9 cases), medium (20 patients), and large (26 cases).The bone volume of the clefted site is divided into three steps: volume 1: (mean 18.1091 mm³); step 2: after 3 months, volume 2 resembles the amount of unhealed defect (mean 0.5109 mm³); and the final bone volume assessment is made after 6 months (22.5455 mm³). Both show statistically significant differences in bone volume formation. Conclusion An alloplastic bone substitute can also be used as a graft material because of its unlimited bone retrieval. Osteon III can be used to reconstruct the alveolar cleft smoothly and effectively.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.195-202
• /
• 2018

The defects that are bound to arise in most construction projects cause disputes among the contracting parties regarding the defect warranty liability (DWL)guaranteed by the retention of the contractor's performance security at the end of the performance period of the contract. Most current projects involve a multiple-tier contractual relationship, causing the liability for some defects to overlap. In addition, many construction projects are made up of multiple detailed work types which an expert hired by the owner inspects the part completed by the contractor and pays an interim payment. However, after the completion of work, the contractor will still hold the defect warranty liability. In a scenario in which the work is delayed due to reasons for which the owner is responsible, the defect warranty liability period is also increased, imposing an additional burden on the contractor. In this study, basic research was carried out with the goal of reducing problems related to defect warranty liability Problems related to defect warranty liability cases and the nature of the defect warranty liability period were investigated. Possible solutions to the problems caused by the DWL that were suggested include the separation of the negligence liability period and the strict liability period, as well as the introduction of a retention money system.

• Journal of KIISE:Software and Applications
• /
• v.37 no.5
• /
• pp.386-393
• /
• 2010

A defect in an image is a set of pixels forming an irregular shape. Since a defect, in most cases, is not easy to be modeled mathematically, the defect detection problem still resides in a research area. If a given image, however, composed by certain patterns, a defect can be detected by the fact that a non-defect area should be explained by another patch in terms of a rotation, translation, and noise. In this paper, therefore, the defect detection method for a repeated multi-patterned image is proposed. The proposed defect detection method is composed of three steps. First step is the interest point detection step, second step is the selection step of a appropriate patch size, and the last step is the decision step. The proposed method is illustrated using SEM images of semiconductor wafer samples.