• Ocean and Polar Research
• /
• v.25 no.2
• /
• pp.133-145
• /
• 2003

Deep-sea surface sediments were collected using a multiple corer at 20 stations of Clarion-Clipperton fracture zone in the northeast equatorial Pacific to understand latitudinal and longitudinal variations of geotechnical properties. There was a distinct latitudinal variation of geotechnical properties in the study area. The northern sediments showed finer grain size, lower water content and porosity, higher bulk density and specific grain density, lower liquid limits and plastic limits than their southern counterparts. The northern sediments are classified into inorganic clays of low plasticity (fat clays) on plasticity charts and normal to active clay on activity chart, whereas, the southern sediments are classified into fine-grained, highly-plastic, inorganic and biogenic silt or organic clays on plasticity chart and normal to very active clay on activity chart. When shear strength are considered, the northern sediments were found to be in unconsolidated states, while the southern ones to be normal to over-consolidated states. These latitudinal variations in sediment characteristics are likely caused by differences in productivity of surface water that controls sediment compositions, sedimentation rates, and grain solubility.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.529-543
• /
• 2003

Deep-sea surface sediments, acquired from 1997 to 2002 in the Clarion-Clipperton fracture zone of the northeast equatorial Pacific, were analyzed for index and geotechnical properties to provide background information for the design of manganese nodule minor. The sediments were classified into 16 types based on the measured properties and evaluated in terms of miner maneuverabillity and potential environmental impacts arising from mining activities. It was found that the middle part of the study area covered with coarse siliceous sediments is more favorable to the commercial production than the northern part of pelagic red clay. In particular, Area B2 in the middle part is considered the best mining site since it shows the highest abundance as well as it consists mostly of normally to over consolidated (types B, C, D) coarse siliceous sediments that are appropriate for effective minor movement and accompany weak environmental impacts. Taking account of all the analyzed core logs, the average shear-strength values are proposed as a practical guideline fur movements of a manganese nodule miner: 6.0 kPa at 10cm and 7.0kPa at 40cm below the seabed.

• Mycobiology
• /
• v.49 no.2
• /
• pp.151-160
• /
• 2021

Despite recent studies, relatively few are known about the diversity of fungal communities in the deep Atlantic Ocean. In this study, we investigated the diversity of fungal communities in 15 different deep-sea sediments from the South Atlantic Ocean with a culture-dependent approach followed by phylogenetic analysis of ITS sequences. A total of 29 fungal strains were isolated from the 15 deep-sea sediments. These strains belong to four fungal genera, including Aspergillus, Cladosporium, Penicillium, and Alternaria. Penicillium, accounting for 44.8% of the total fungal isolates, was a dominant genus. The antiaflatoxigenic activity of these deep-sea fungal isolates was studied. Surprisingly, most of the strains showed moderate to strong antiaflatoxigenic activity. Four isolates, belonging to species of Penicillium polonicum, Penicillium chrysogenum, Aspergillus versicolor, and Cladosporium cladosporioides, could completely inhibit not only the mycelial growth of Aspergillus parasiticus mutant strain NFRI-95, but also the aflatoxin production. To our knowledge, this is the first report to investigate the antiaflatoxigenic activity of culturable deep-sea fungi. Our results provide new insights into the community composition of fungi in the deep South Atlantic Ocean. The high proportion of strains that displayed antiaflatoxigenic activity demonstrates that deep-sea fungi from the Atlantic Ocean are valuable resources for mining bioactive compounds.

• Ocean and Polar Research
• /
• v.32 no.1
• /
• pp.15-22
• /
• 2010

Calcium carbonate ($CaCO_3$) content was measured from 3 box core (BC060301, BC060303, BC070301) sediments, in addition to pilot core (PC313) sediments, from deep waters within the Western Pacific Ocean. At the two collection sites (BC060301, PC313) located close to the equator, downcore variation exhibited low $CaCO_3$ content during the interglacial period and high $CaCO_3$ content during the glacial period. Variation of coarse fraction (>$63\;{\mu}m$) content also followed changes in $CaCO_3$ content, indicating that dissolution effect of bottom water decreased during the glacial period. Such variation pattern is typical of the Pacific Ocean. However, downcore variation at the two collection sites (BC060303, BC070301) in the Philippine Sea contrasted the trend of the previous two cores (i.e., high $CaCO_3$ content during the interglacial period and low during the glacial period). This pattern is typical of the Atlantic Ocean. Such results may be attributed to the increasing dilution effect, initiated possibly by the increased transportation of terrigenous materials from nearby continent and archipelago during the glacial period when sea level was low. Alternatively, it is possible that the non-carbonate biogenic particles may have been responsible for dilution. Because of these uncertainties, the record of $CaCO_3$ variation in the deep Western Pacific Ocean is not regionally consistent.

• Journal of Marine Life Science
• /
• v.6 no.1
• /
• pp.9-22
• /
• 2021

We determined the composition of water and sediment bacterial assemblages from the East Sea using 16S rRNA gene sequencing. Total bacterial reads were greater in surface waters (<100 m) than in deep seawaters (>500 m) and sediments. However, total OTUs, bacterial diversity, and evenness were greater in deep seawaters than in surface waters with those in the sediment comparable to the deep sea waters. Proteobacteria was the most dominant bacterial phylum comprising 67.3% of the total sequence reads followed by Bacteriodetes (15.8%). Planctomycetes, Verrucomicrobia, and Actinobacteria followed all together consisting of only 8.1% of the total sequence. Candidatus Pelagibacter ubique considered oligotrophic bacteria, and Planctomycetes copiotrophic bacteria showed an opposite distribution in the surface waters, suggesting a potentially direct competition for available resources by these bacteria with different traits. The bacterial community in the warm surface waters were well separated from the other deep cold seawater and sediment samples. The bacteria exclusively associated with deep sea waters was Actinobacteriacea, known to be prevalent in the deep photic zone. The bacterial group Chromatiales and Lutibacter were those exclusively associated with the sediment samples. The overall bacterial community showed similarities in the horizontal rather than vertical direction in the East Sea.

• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.391-398
• /
• 2002

Trace organic contaminants in deep-sea sediments near Dokdo were analyzed. Total PAMs concentration ranged 14.8-314 ng/g dry weight and high molecular weight PAHs were dominant. The highest PAHs concentration was detected at A19 which located at Ulleung Basin. Most of organochlorines were under detection limit. Among the detected organochlorines, DDT compounds were dominant and followed by HCHs and HCB. Butyltin compounds and most of organophosphorus pesticides were not detected. Vertical distribution of PAHs showed typical sub-surface maximum and decreasing trends depending on depth. The highest PAHs concentration reached 454ng/g. Some organochlorines, DDT, HCH was detected and also showed decreasing trends. Other target organic pollutants were not detected in core sediments. Abnormally high level of PAHs concentration in A19 was discussed and the input sources were inferred to be the transport of sludge derived pollutant dumped at dumping site 'Byung' by deep current.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.5
• /
• pp.602-613
• /
• 2013

This paper aims at an investigation of the features of bacterial communities in surface sediments of the South China Sea (SCS). In particular, biogeographical distribution patterns and the phylogenetic diversity of bacteria found in sediments collected from a coral reef platform, a continental slope, and a deep-sea basin were determined. Bacterial diversity was measured by an observation of 16S rRNA genes, and 18 phylogenetic groups were identified in the bacterial clone library. Planctomycetes, Deltaproteobacteria, candidate division OP11, and Alphaproteobacteria made up the majority of the bacteria in the samples, with their mean bacterial clones being 16%, 15%, 12%, and 9%, respectively. By comparison, the bacterial communities found in the SCS surface sediments were significantly different from other previously observed deep-sea bacterial communities. This research also emphasizes the fact that geographical factors have an impact on the biogeographical distribution patterns of bacterial communities. For instance, canonical correspondence analyses illustrated that the percentage of sand weight and water depth are important factors affecting the bacterial community composition. Therefore, this study highlights the importance of adequately determining the relationship between geographical factors and the distribution of bacteria in the world's seas and oceans.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.spc1
• /
• pp.203-213
• /
• 2006

The spatial patterns of meiobenthic communities in deep-sea sediment were examined. Sediment samples for analyzing of meiobenthic community structure were collected using a remote operated vehicle (ROV), multiple corer TV grab at 20 stations at five sites. In all, 15 meiofauna groups were recorded. Nematodes were the most abundant taxon. Benthic foraminiferans, harpacticoid copepods, polychaetes, and crustacean naupii were also dominant groups at all sites. The total meiofauna density at the study sites varied from 49 to 419 ind./$10cm^2$. The maximum density was recorded at a site located in Challenger Deep in the Mariana trench where simple benthic foraminifera with organic walls flourish. These distinctive taxa seem to be characteristic of the deepest ocean depths. Active hydrothermal sediments contain up to 150 harpacticoid copepods per $10cm^2$ of sediment. In a inactive ridge sediments, devoid of macrofaunal organisms:, the abundance of harpacticoid copepods never exceeded 15 ind./$10cm^2$. Multivariate analysis (multidimensional scaling) revealed significant differences in community structure among the three regions; near an active hydrothermal vent, in the deepest ocean depths and at typical deep-sea bed sites.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.383-394
• /
• 2014

The surface sediments from the manganese nodule exploration area of Korea in the Clarion-Clipperton fracture zone were investigated to understand the resource potential of and emplacement mechanism for rare earth elements (REEs). The sediments are categorized into three lithological units (Unit I, II and III from top to bottom), but into two groups (Unit I/II and Unit III) based on the distribution pattern of REEs. The distribution pattern of REEs in Unit I/II is similar to that of Post-Archean Australian Shale (PAAS), but shows a negative Ce anomaly and enrichment in heavy REEs (HREEs). In Unit III, the HREE enrichment and Ce anomaly is much more remarkable than Unit I/II when normalized to PAAS, which are interpreted as resulting from the absorption of REEs from seawater by Fe oxyhydroxides that were transported along the buoyant plume from remotely-located hydrothermal vents. It is supported by the PAAS-normalized REE pattern of Unit III which is similar to those of seawater and East Pacific Rise sediments. Meanwhile, the PAAS-normalized REE pattern of Unit I/II is explained by the 4:1 mixing of terrestrial eolian sediment and Unit III from each, indicating the much smaller contribution of hydrothermal origin material to Unit I/II. The studied sediments have the potentiality of a low-grade and large tonnage REE resource. However, the mining of REE-bearing sediment needs a large size extra collecting, lifting and treatment system to dress and refine low-grade sediments if the sediment is exploited with manganese nodules. It is economically infeasible to develop low-grade REE sediments at this moment in time because the exploitation of REE-bearing sediments with manganese nodules increase the mining cost.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.168-177
• /
• 2008

Trafficablility of a miner and potential environmental impacts due to mining activities should be considered in the selection of a commercial manganese nodule mining site. These two factors can be evaluated comparatively with physical properties and shear strength of sea-bed sediments. For the qualitative comparison of potential minig sites in terms of these two factors, physical properties such as water contents, void ratios, porosities, and grain densities, and shear strengths of surface sediments were determined for the three potential manganese nodule mining sites(KR1, KR2, and KR5) in the Korean manganese nodule contract area, northeast Pacific. For the study, sediment samples were collected from 107 stations from 2004 to 2006. The physical properties of surface sediments showed more significant differences between northern(KR1, KR2) and southern(KR5) blocks than between northern blocks(KR1 vs. KR2). Water content, void ratio, and porosity of sediments from KR5 were relatively higher than those from KR1 and KR2. Grain density of sediments from KR5 was relatively lower than those from KR1 and KR2. Shear strengths of the top 10cm sediments were higher in KR1 and KR2, whereas those of the deeper part were highest in KR5 block. Generally, sediments of high water contents are less suspendible than those of the low water contents by benthic disturbances, thus less disturbance is expected in the sediments of high water content by mining activities. In terms of trafficability, the shear strength of sediment below 10 cm deep is more important than shallower part because miner will disturb at least top 10 cm interval of the surface sediments. Base on these results, we conclude that KR5 area will be the best site for commercial mining among three investigated sites in this study.