• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.794-800
• /
• 2018

The proliferation resistance (PR) of Th/U and Th/Pu fuels used in CANada Deuterium Uranium for the deep geological repository was assessed by combining the multiattribute utility analysis proposed by Chirayath et al., 2015 with the transport model of radionuclides in the repository and comparing with that of the used natural U fuel case. It was found that there was no significant advantage for Th/U and Th/Pu fuels from the viewpoint of the PR in the repository. It was also found that the PR values for used nuclear fuels in the repository of Th/U, Th/Pu, and natural U was comparable with those for enrichment and reprocessing facilities in the pressurized water reactor (PWR) nuclear fuel cycle. On the other hand, the PR values considering the transport of radionuclides in the repository were found to be slightly smaller than those without their transport after the used nuclear fuels started dissolving after 1,000 years.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1013-1016
• /
• 2004

High level radioactive wastes, such as spent fuels generated from nuclear power plant, will be disposed in a deep geological repository. To maintain the integrity of the disposal canister and to carry out the process effectively, the emplacement process for the canister system in borehole of disposal tunnel should be well defined. In this study, the concept of the disposal canister emplacement process for deep geological disposal was established. To do this, the spent fuel arisings and disposal rate were reviewed. Also, not only design requirements, such canister and disposal depth but also preliminary repository layout concept were reviewed. Based on the requirements and the other bases, the canister emplacement process in the borehole of the disposal tunnel was established. The established concept of the disposal canister emplacement process will be improved continuously with the future studies. And this concept can be effectively used in implementing the reference repository system of our own case.

• 터널과지하공간
• /
• 제22권6호
• /
• pp.429-437
• /
• 2012

본 연구에서는 고준위 방사성 폐기물 처분장의 특징인 높은 고도차와 온도차이로 인해 발생하는 자연환기량을 바탕으로 처분터널내 온도를 전산유체학을 활용하여 예측하였다. 선행된 연구에서 Hydrostatic method와 CFD를 활용하여 자연환기량을 정량적으로 평가한 결과 상당히 큰 자연환기량이 발생이 됨을 확인하였다. 이러한 결과를 바탕으로 폐기물 발열량에 따라 발생되는 자연환기량으로 인한 처분터널내 온도예측을 실시하였으며, 처분장을 크게 심지층 처분장과 지상처분장으로 나누어 온도예측을 실시하였다. 해석결과 심지층 처분장은 암반으로의 열전달과 충분한 자연환기량의 발생으로 처분장내 온도 제어에 효과적인 반면에, 지상처분장의 경우 외부온도의 영향을 크게 받고 충분한 자연환기량을 발생시키지 못하여 온도제어에는 불리함을 확인하였다. 또한 심도 200 m 심지층 처분장의 경우 심도 500 m까지 약 $10^{\circ}C$정도의 열이 전달됨을 확인하였다. 즉, 국내에 건설예정인 고준위 방사성 폐기물 처분장을 온도제어에 중점을 두고 설계한다면 지상처분장보다는 심지층 처분장이 타당한 것으로 연구되었다.

• Nuclear Engineering and Technology
• /
• 제32권3호
• /
• pp.244-253
• /
• 2000

A Simple Large Model (SLM), which can be used to make thermal calculation for a deep geological repository with finite number of HLW canisters, was developed. In order to develop the SLM, a Simple Basic Model (SBM), which will be a unit of the SLM, was optimized first. The SBM was optimized to achieve the same maximum buffer temperature as that of the Detailed Basic Model (DBM) representing the real geometric aspects of the repository. In contrast to the models with the assumption of infinite number of canisters which cannot consider boundary effect, the SLM can model the real repository with finite number of canisters and thus consider the boundary effect. Thermal results from the SLM can be used to evaluate the reliability of the models, which do not consider boundary effect. This model can also be used to simulate the thermal layout design and to analyze the thermal safety of a deep geological repository as well as an underground laboratory.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1540-1554
• /
• 2023

To use nuclear energy sustainably, spent nuclear fuel, classified as high-level radioactive waste and inevitably discharged after electricity generation by nuclear power plants, must be managed safely and isolated from the human environment. In Korea, the land area is limited and the amount of high-level radioactive waste, including spent nuclear fuels to be disposed, is relatively large. Thus, it is particularly necessary to maximize disposal efficiency. In this study, a high-efficiency deep geological repository concept was developed to enhance disposal efficiency. To this end, design strategies and requirements for a high-efficiency deep geological repository system were established, and engineered barrier modules with a disposal canister for pressurized water reactor (PWR)-type and pressurized heavy water reactor type Canada deuterium uranium (CANDU) plants were developed. Thermal and structural stability assessments were conducted for the repository system; it was confirmed that the system was suitable for the established strategies and requirements. In addition, the results of the nuclear safety assessment showed that the radiological safety of the new system met the Korean safety standards for disposal of high-level radioactive waste in terms of radiological dose. To evaluate disposal efficiency in terms of the disposal area, the layout of the developed disposal areas was assessed in terms of thermal limits. The estimated disposal areas were 2.51 km² and 1.82 km² (existing repository system: 4.57 km²) and the excavated host rock volumes were 2.7 Mm³ and 2.0 Mm³ (existing repository system: 4.5 Mm³) for thermal limits of 100 ℃ and 130 ℃, respectively. These results indicated that the area and the excavated volume of the new repository system were reduced by 40-60% compared to the existing repository system. In addition, methods to further improve the efficiency were derived for the disposal area for deep geological disposal of spent nuclear fuel. The results of this study are expected to be useful in establishing a national high-level radioactive waste management policy, and for the design of a commercial deep geological repository system for spent nuclear fuels.

• 터널과지하공간
• /
• 제14권6호
• /
• pp.429-439
• /
• 2004

국내 원전에서 발생되는 36,000톤의 사용후핵연료를 처분하기 위해서는 약 $4km^2$의 지하 처분장이 필요하다. 본 연구에서는 굴착량과 처분장 면적을 최소화하기 위한 지하 심부 처분장 배치의 최적화를 실시하였다. 열 해석 결과를 토대로 처분 터널과 처분공 간격이 처분장 배치에 미치는 영향을 고려한 결과, 처분장 면적과 굴착량은 처분 터널의 길이가 길어짐에 따라 감소하였다. 주어진 열적 기준을 만족하면서 처분장 면적을 줄이기 위해서는 처분 터널의 간격을 줄이고 처분공 간격을 늘리는 것이 유리하였으며, 반면에 굴착량을 최소화하는 경우 처분공 간격을 줄이고 처분 터널 간격을 늘려주는 것이 효과적인 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.77-84
• /
• 2000

In this paper, the stress analysis of the cast iron insert of spent nuclear fuel disposal canister in a deep repository at 500m underground is done for the underground pressure variation. Since the nuclear fuel disposal usually emits much heat and radiation, its careful treatment is required. And so a long term safe repository at a deep bedrock is used. Under this situation, the canister experiences some mechanical external loads such as hydrostatic pressue of underground water, swelling pressure of bentonite, sudden rock movement etc.. Hence, the canister should be designed to withstand these loads. The cast iron insert of the canister mainly supports these loads. Therefore, the stress analysis of the cast iron insert is done to determine the design variables such as the diameter versus length of canister and the number and array type of inner baskets in this paper, The linear static structural analysis is done using the finite element analysis method. And the finite element analysis code, NISA, is used for the computation.

• Nuclear Engineering and Technology
• /
• 제33권6호
• /
• pp.605-618
• /
• 2001

For the mechanical stability assessment of a deep underground high-level waste repository. computer simulations using FLAC3D were carried out and important parameters including stress ratio, depth, tunnel size, joint spacing, and joint properties were chosen from sensitivity analysis. The main effect as well as the interaction effect between the important parameters could be investigated effectively using fractional factorial design . In order to analyze the stability of the disposal tunnel and deposition hole in a discontinuous rock mass, different modelings were performed under different conditions using 3DEC and the influence of joint distribution and properties, rock properties and stress ratio could be determined. From the three dimensional modelings, it was concluded that the conceptual repository design was mechanically stable even in a discontinuous rock mass.

• 방사성폐기물학회지
• /
• 제17권3호
• /
• pp.355-362
• /
• 2019

본 논문에서는 최근 새롭게 제안된 심부수평시추공처분 개념을 소개하고, 우리나라 여건에서는 어떻게 적용될 수 있을지에 대하여 고려해 보았다. 이 개념은 방향제어시추기술로 심부수평시추공을 설치하고 고준위방사성폐기물을 처분하는 개념으로, 경제성과 안전성에서 기존의 동굴식 처분개념에 비해 큰 장점을 가지고 있는 것으로 평가된다. 그러나, 아직까지 아이디어 수준이므로 국제사회에서 처분 안전성과 성능을 실증하기까지 시간이 꽤 걸릴 것이고, 규제기관의 지침 개발도 뒷받침되어야 하는 문제가 있다. 우리나라는 국토가 좁고 인구밀도가 높아 NIMBY (Not In My Back Yard) 현상이 강할 수 밖에 없고, 더불어 사용후핵연료 발생량도 적지 않아 매우 어려운 입지여건을 가지고 있다. 이러한 여건에서 연안 육지부보다는 대륙붕의 안정된 환경의 장점을 살려 연안 해저암반을 심부수평시추공처분 개념의 처분영역으로 활용한다면 해당 지역사회의 심리적인 불안감을 획기적으로 완화시킬 수 있고 처분 안전성도 향상시킬 수 있을 것으로 기대한다. 더불어, 중앙집중식 심부동굴처분시설을 건설하는 경우에도 대륙붕을 활용하여 동일한 장점을 살리는 것을 고려해볼 필요가 있다.

• Geomechanics and Engineering
• /
• 제22권5호
• /
• pp.375-384
• /
• 2020

In this study, the application of conventional cubic law to a deep depth condition was experimentally evaluated. Moreover, a modified equation for estimating the rock permeability at a deep depth was suggested using precise hydraulic tests and an effect analysis according to the vertical stress, pore water pressure and fracture roughness. The experimental apparatus which enabled the generation of high pore water pressure (< 10 MPa) and vertical stress (< 20 MPa) was manufactured, and the surface roughness of a cylindrical rock sample was quantitatively analyzed by means of 3D (three-dimensional) laser scanning. Experimental data of the injected pore water pressure and outflow rate obtained through the hydraulic test were applied to the cubic law equation, which was used to estimate the permeability of rock fracture. The rock permeability was estimated under various pressure (vertical stress and pore water pressure) and geometry (roughness) conditions. Finally, an empirical formula was proposed by considering nonlinear flow behavior; the formula can be applied to evaluations of changes of rock permeability levels in deep underground facility such as nuclear waste disposal repository with high vertical stress and pore water pressure levels.