• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.809-814
• /
• 2009

Deep mixing method has been used for ground improvement and foundation system for embankment, port and harbor foundations, retaining wall, and liquefaction mitigations. It has attractive benefits because it is not only improved strength of soft ground but superior for prevention of settlement. However, the quality controls of improved mass affect to the efficiency of the deep mixing method is not properly established. These effects vary depending upon the construction environments and conditions of agitation in consideration of an agitator. The strength and shape of the improved column are not unique and these are affected by mechanical properties of agitators. In this study, in order to investigate the efficiency of deep mixing method for ground improvement on a soft clay ground, experimental studies are performed considering mechanical properties of agitator; the location of exit-hole of admixtures, an angle of mixing wing and a speed of revolution. The experiments are conducted with the simulated apparatus for deep mixing plant that reduced the scale in 1:8 of the real plant. According to the results, the diameter and shape of improved column mass vary depending on the mechanical properties and operating conditions of agitator. Its quality is better when the exit-hole of admixtures is located in the mixing wing, when an angle of mixing wing is large, and when the speed of revolution is rapid.

• 한국농촌건축학회논문집
• /
• 제24권2호
• /
• pp.45-52
• /
• 2022

Of the 17,106 domestic reservoirs(as of December 2020), 14,611 are older than 50 years, and these old reservoirs will gradually increase over time. The injection grouting method is most applied to the reinforcement method of the aging reservoir. However, the injection grouting method is not accurate in uniformity and reinforced area. An laboratory model test was conducted to evaluate the applicability of the deep mixing method, which compensated for these shortcomings, as a reservoir reinforcement method. As a result of calculating the hydraulic conductiveity for each method through the model test results, the injection grouting method was calculated as a hydraulic conductiveity value that was about 7.5 times larger than that of the deep mixing method. As a result of measuring the water level change in the laboratory model test, it was found that the water level change decreased in the injection method and deep mixing method compared to the non-reinforcement method. In addition, deep mixing method showed a water level change of about 15% based on 40 hours compared to the injection method, indicating that the water-reducing effect was superior to that of the injection method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.841-846
• /
• 2003

The purpose of this paper is to present and discuss some of harbor foundation constructed on seashore soft ground by Deep Wing Mixing in deep mixing method. A series of laboratory and field experiments including unconfined compressive strength, permeability, geo-physical survey, sea water concentration, lateral and settlement measurement, field core sample were carried out to check physical, mechanical and environmental characteristics of solidified foundation soil treated by HWS solidifying agent. The results from this research showed that Deep Wing Mixing method could be efficiently applied in the construction site of seashore structure foundation.

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.500-506
• /
• 2011

본 연구에서는 일반적으로 연약지반 개량 공사에 사용하는 심층혼합처리 공법을 도심지 공사에서 지반개량 공법으로 적용하는 방안을 평가하였다. 심층혼합처리 공법을 협소한 도심지 현장에서도 시공이 가능하도록 소형화시킨 시공 장비를 사용하여 서울 시내 재개발 현장에서 기초 지반개량 목적으로 적용하고 개량한 지반의 강도 특성, 지반교반 시 발생한 진동, 시공위치와 인접한 석축구조물에 발생한 변위를 측정하였다. 강도 시험 및 현장계측 결과 심층혼합처리 공법은 원지반의 강도를 효과적으로 개량시켰으며 시공 시 발생시킨 진동과 인접 구조물에 발생한 변위가 미소하여 도심지 공사에서 요구하는 기준을 만족시키는 것으로 판단되었다. 따라서 심층혼합처리 공법은 소음 및 진동 문제가 중요한 고려사항인 도심지 공사에서 기초공법으로 유용하게 적용할 수 있을 것으로 판단된다.

• 한국방재학회 논문집
• /
• 제11권3호
• /
• pp.105-110
• /
• 2011

최근 해상 연약지반 개량공법으로 저소음, 저진동으로 공해가 적고, 단시간에 큰 강도를 얻을 수 있는 심층혼합공법이 널리 사용되고 있다. 본 연구에서는 이러한 심층혼합공법 중 하나인 DCM(Deep Cement Mixing) 공법에 대하여 다양한 점토-시멘트 배합비를 갖는 공시체를 제작하여 일축압축강도시험을 수행하고 그 결과를 이용하여 적절한 점토-시멘트 배합비를 제안하고자 하였으며, 원심모형시험을 이용하여 접원식 및 벽식 DCM 공법 적용 현장의 케이슨 구조물 안정성을 평가하였다. 일축압축 시험결과 DCM 공법의 최적 점토-시멘트 배합비는 28.5%로 나타났다. 또한 원심모형시험 결과 DCM 공법으로 처리된 지반위에 놓인 케이슨 구조물의 안정성을 확인하였으나, 벽식 DCM 공법이 접원식 DCM 공법에 비해 케이슨 구조물의 수평 변위에 대해서는 7%, 침하에 대해서는 39% 정도 지반개량효과가 다소 크게 나타났다.

• Computers and Concrete
• /
• 제25권5호
• /
• pp.433-445
• /
• 2020

A method is proposed in this paper to estimate the workability of self-compacting concrete (SCC) in different mixing conditions with different mixers and mixing volumes by recording the mixing process based on deep learning (DL). The SCC mixing videos were transformed into a series of image sequences to fit the DL model to predict the SF and VF values of SCC, with four groups in total and approximately thirty thousand image sequence samples. The workability of three groups SCC whose mixing conditions were learned by the DL model, was estimated. One additionally collected group of the SCC whose mixing condition was not learned, was also predicted. The results indicate that whether the SCC mixing condition is included in the training set and learned by the model, the trained model can estimate SCC with different workability effectively at the same time. Our goal to estimate SCC workability in different mixing conditions is achieved.

• 한국지반공학회논문집
• /
• 제23권7호
• /
• pp.99-104
• /
• 2007

심층혼합처리공법은 항만기초, 토류벽구조, 차수벽 및 가시설, 그리고 거축기초와 교량기초 등에서 다양하게 사용되어오고 있다. 이 공법은 지반개량을 통한 침하방지와 안정성확보를 위한 지반강도를 확보하기 위해 시멘트와 혼화제를 현장토와 혼합하는데 있어서 가장 효율적이고 경제적이어야 한다. 본 연구에서는 교반날개의 각도, 교반속도 등에서 다양한 교반조건을 적용하여 실내실험을 수행하였다. 실내실험은 현장 타설장비를 1:8 비율로 축소하여 제작하였다. 최적의 교반조건을 도출하기 위하여 다양한 교반조건에 따른 심층혼합처리 개량체의 강도를 분석하였다. 연구결과, 심층혼합처리공법의 교반조건은 개량체의 강도와 형상에 아주 큰 영향을 미치고 있음을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.847-852
• /
• 2003

The purpose of this paper is to develop the new deep mixing method installed automatic control equipments for the better construction in deep mixing and grouting. Civil, geotechnical, electronic, and communication experts have worked together for a long time for the development of automatic measuring devices using wire and wireless transmitting-receiving set. A series of laboratory and field experiments were carried out to check the reliability and field applicability of this system. New total automatic control system including automatic devices for checking angle, depth and quantity of injected grout was invented from the result of this research.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.257-267
• /
• 2006

The earth retaining wall systems for excavation works in a populated urban area or a poor soil deposit can be limited due to various restriction. Thus there are various methods to be applied for them such as the soldier pile method, the diaphragm wall with counterfort and so on. In this study, the self-supported earth retaining wall using the DCM(Deep Cement Mixing) method, including its merits, demerits and some important characteristics occured in the design and the construction stage, was introduced. It might be reference for the other design and construction procedures using the DCM method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.123-131
• /
• 2009

본 연구에서는 2차원 및 3차원 유한요소 해석을 이용하여 심층혼합처리 공법에 의한 연약지반 개량시 개량 심도를 결정 하였고, 그 결과는 다음과 같았다. 1. 2차원 해석 결과는 3차원 해석 결과 보다 약 10% 정도 크게 해석되었다. 2. 연약지반의 치환율이 5%이하 일 때 침하량은 급격히 증가하였다. 3. 심층혼합공법으로 연약지반 개량시 횡방향 간격 3m, 종방향 간격 6m, 그리고 8m의 심도로 개량하는것이 가장 경제적인 것으로 나타났다. 4. 심층혼합공법으로 연약지반 개량시 2차원 유한요소 해석보다 3차원 유한요소 해석으로 결정되어야 한다.