• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.641-645
• /
• 2002

In case of aluminum-cased battery, The ratio of height and base of square is generally above the ten times, square-shaped and problem of non-axis symmetry. It is typical model to set up the analysis method of finite element. The reliable analysis of finite element method is suggested, which is used to investigate the possibility that multi-stage deep drawing and ironing used currently is replaced by backward impact extrusion favorable in the respect of cost production and productivity. The influence of parameter was analyzed and compared, which was considered to analyze the process of large deformation plasticity such as extrusion. Die and billet was made as the same shape of finite element model. The results of experiment show good forming without the rupture and wrinkles with the optimum velocity 100mm/sec obtained by analysis.

• 소성∙가공
• /
• 제13권8호
• /
• pp.696-703
• /
• 2004

The purpose of this study is to examine the bulk/sheet forming characteristics of bulk amorphous alloys in the super cooled liquid state. Recently it is reported that amorphous alloys exhibit stress overshoot/undershoot and non-Newtonian behaviors even in the super cooled liquid state. The stress-strain curves with the temperature-dependences as well as strain-rate dependence of Newtonian/non-Newtonian viscosities of amorphous alloys are obtained based on the previous experimental works. Then, those curves are directly used in the thermo-mechanical finite element analyses. Upsetting and deep drawing of amorphous alloys are simulated to examine the effects of process parameters such as friction coefficient, forming speed and temperature. It could be concluded that the superior formability of an amorphous alloy can be obtained by taking the proper forming conditions.

• 소성∙가공
• /
• 제32권6호
• /
• pp.303-310
• /
• 2023

Electrohydraulic forming(EHF), one of the high-speed forming method, can supplement the weak point of previous forming process such as deep-drawing and electromagnetic forming. Indeed, EHF is time-consuming process during installing wire before experiment that hard to apply to industry. In this research, applying wireless electrode, the formability of SUS430 sheet was compared through EHF experiments using wire-installed electrode and the other, wireless. Although the power was a little lacking, the advantages of the experiment using wireless electrode could be confirmed with checking the optimal location of electrodes where the plasma is generated and comparing free-bulging height depending on former and later condition of electrodes with performing several single and multistage experiments for same voltage, 6 kV.

• 건축역사연구
• /
• 제31권1호
• /
• pp.41-50
• /
• 2022

Traditional wooden buildings deform over time and are vulnerable to fire or earthquakes. Therefore, traditional wooden buildings require continuous management and repair, and securing architectural drawings is essential for repair and restoration. Unlike modernized CAD drawings, traditional wooden building drawings scan and store hand-drawn drawings, and in this process, many noise is included due to damage to the drawing itself. These drawings are digitized, but their utilization is poor due to noise. Difficulties in systematic management of traditional wooden buildings are increasing. Noise removal by existing algorithms has limited drawings that can be applied according to noise characteristics and the performance is not uniform. This study presents deep artificial neural network based noised reduction for architectural drawings. Front/side elevation drawings, floor plans, detail drawings of Korean wooden treasure buildings were considered. First, the noise properties of the architectural drawings were learned with both a cycle generative model and heuristic image fusion methods. Consequently, a noise reduction network was trained through supervised learning using training sets prepared using the noise models. The proposed method provided effective removal of noise without deteriorating fine lines in the architectural drawings and it showed good performance for various noise types.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.904-914
• /
• 2004

The fiber reinforced composite material is widely used in the multi-industrial field because of their high specific modulus and specific strength. It has two main merits which are to cut down energy by reducing weight and to prevent explosive damage proceeding to the sudden bursting which is generated by the pressure leakage condition. Therefore, Pressure vessels using this composite material can be applied in the field such as defence industry and aerospace industry. In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding of composite vessel subjected to internal pressure, the standard interpretation model is developed by using the ANSYS with AutoLISP and ANSYS APDL languages, general commercial software, which is verified as useful characteristic of the solution. Among the modules of the system, both the process planning module for carrying out the process planning of filament wound composite pressure vessel and the autofrettage process module for obtaining higher residual stress will minimize trial and error and reduce the period for developing new products. The system can serve as a valuable system for experts and as a dependable training aid for beginners.

• 한국의사학회지
• /
• 제18권1호
• /
• pp.103-126
• /
• 2005

1) Objective This research is a process of examining the Traditional Acupunctural Methods left in our documents. The objectives of this paper are explaining the process of researching documents and reporting several points revealed in this process. 2) Process This study was done through the following steps: (1) We located the Acupunctural Methods in the original text database on the web. (2) We sorted them according to criterion. (3) We set up some standard clauses in order to organize the selected information. (4) We re-organized the information following the standards within the categories. (5) As for clauses that were not fully explained in the documents, we tried to restore them through other documents. 3) Results (1) 11 standard clauses were set up in order to organize the Traditional Acupunctural Methods. (2) Traditional Acupunctural Methods were extracted from 22 documents, (3) 24 Traditional Acupunctural Methods were extracted and organized by standards. (4) We learned of similar methods with resembling ways of drawing blood and methods with deep interest in the depth of needle insertion. Also, we were able to gain a clue to the exchange of Acupunctural Methods among the three Asian countries and the possibility of research using the Korean Medicine Database.

• 한국산업정보학회논문지
• /
• 제26권5호
• /
• pp.1-9
• /
• 2021

아동 그림은 내면의 감정을 표현할 수 있는 수단으로 아동 심리 진단에 널리 이용되고 있다. 본 논문에서는 아동 그림 분석에 적용할 수 있는 아동 그림 기반의 객체 탐지 알고리즘을 제안한다. 먼저 사진에서의 그림 영역을 추출하였고 데이터 라벨링 과정을 수행하였다. 이후 라벨링된 데이터 셋를 사용하여 Faster R-CNN 기반 객체 탐지모델을 학습하고 평가하였다. 탐지된 객체 결과를 기반으로 그림 면적 및 위치 또는 색상 정보를 계산하여 그림에 대한 기초정보를 쉽고 빠르게 분석할 수 있도록 설계하였다. 이를 통해 아동 그림을 이용한 심리분석에 있어 인공지능 기반 객체 탐지 알고리즘의 활용성을 보였다.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.177-185
• /
• 2001

This study shows the process design and forming analysis of permalloy shielding can that support the automobile multi-display parts to indicate the accurate information of car. This study is particularly important, since the strain and thickness of permalloy shielding can is known to affect the magnetic properties such as coercivity and permeability quite thickness of permalloy shielding can is known to affect the magnetic properties such as coercivity and permeability quite sensitively. The objective functions are strain and thickness deviation. The punch radius, die radius and blank holding force are considered as design parameters. Orthogonal array (OA) table and characteristics are applied to neural network (NN) as train data. After training, the optimal and robust condition of design parameters is selected. This study shows the correlation between the design methodology of NN and the statistical design of experiments (DOE) approach.

• 한국정밀공학회지
• /
• 제4권1호
• /
• pp.74-82
• /
• 1987

딥 드로오잉 시의 소재누르기판의 힘을 펀치의 변위 혹은 힘의 임의의 함수로서 제어 시킬 수 있는 서브프레스장치 및 유압장치를 제작하고 제어용 프로그램을 작성하여 시 험하였다. 제작한 장치를 인스트론 시험기에 설치하고 제어용 프로그램을 IBM퍼스널 컴퓨터를 사용하여 실행시킨 결과, 기계 제어 부분은 어셈블러언어로, 계산 부분은 고급 언어로 프로그램을 작성하여 링크시킨 후에 컴파일링하여 사용하는것이 제어의 응답성 및 정확도를 향상시킬 수 있음이 판명되었다. 또한, 소재누르기판의 힘의 제어에 필요한 이론 및 예비 결과들도 제시하였다.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.79-86
• /
• 2000

In this study, a method of optimal blank design using the sensitivity analysis has been proposed. To get sensitivity a well-known commercial code PAM-STAMP has been used. In order to verify this method, formings of square cup, clover shaped cup and L shaped cup have been chosen as the examples. With the predicted optimal blank both computer simulation and experiment are performed. Excellent agreements are recognized between the numerical results and the target contour shapes. Through the investigation, the proposed systematic method of optimal blank design is found to be effective in the design of the deep drawing process.