• Restorative Dentistry and Endodontics
• /
• 제45권1호
• /
• pp.9.1-9.7
• /
• 2020

The restorative procedure in posterior teeth involves clinical steps related to professional skill, especially when using the incremental technique, which may fail in the long term. A recent alternative is bulk-fill resins, which can reduce polymerization shrinkage, decreasing clinical problems such as marginal leakage, secondary caries, and fracture. This scientific study aims to report a clinical case using bulk-fill resin with an occlusal matrix. As determined in the treatment plan, an acrylic resin matrix was produced to establish an improved oral and aesthetic rehabilitation of the right mandibular first molar, which presented a carious lesion with dentin involvement. The occlusal matrix is a simple technique that maintains the original dental anatomy, showing satisfactory results regarding function and aesthetic rehabilitation.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.242-243
• /
• 2009

Friction stir welding and friction stir processing is a new solid state processing technique for ioining and micro..structural modification in metallic materials. It has been applied not only joining for light metals but also modification of the microstructure to enhance mechanical properties. In thin study, we investigated the mechanical properties for applied friction stir welding and processing under various parameters such as probe diameter, probe type, traveling speed and rotating speed for 5456-H116 AI allov. As a result of experiments, optimum condition of friction stir welding is traveling speed of 15mm/min, rotating speed of 500RPM at 6mm diameter probe. Moreover, in the case of friction stir processing, the optimum condition is traveling speed of 15mm/min, rotating speed of 250RPM at full screw probe. As above mentioned, the mechanical characteristics enhanced with the decreasing of traveling speed and the increasing of friction areas because of plastic flow due to high friction heat. These result can be used as reference data for ship repairment.

• 대한한의학회지
• /
• 제23권2호
• /
• pp.225-230
• /
• 2002

Dermatomyositis is an inflammatory cutaneo-muscular disease of unknown etiology, characterized by symmetrical proximal muscle weakness and typical dermatologic manifestation. Henoch-Schonlein purpura is most common in children. In Korea, dermatomyositis or Henoch-Schonlein purpura associated with herbal medicine has not been reported. The subject patient is a seven year-old girl diagnosed with dermatomyositis in August 1999 and Henoch-Schonlein purpura in January, July 2001. There were symptoms of dermatomyositis such as headache, arthralgia, eruption, itching and abdominal pain. I think the herb-prescription composed or Radix astragali (Huangqi), Herba agrimoniae (Xianhecao), Fructus jujubae (Dazao) had an ameliorating effect on Henoch-Schonlein purpura by decreasing these symptoms.

• 음성과학
• /
• 제9권4호
• /
• pp.39-47
• /
• 2002

The purpose of this study was to investigate the effects of Seo Dongil's voice technique on voice quality in patient with adductor spasmodic dysphonia. One patient participated in the study. The subject was assessed acoustically (Ave Fo, Ave Int, percent speech time, percent silence time, percent voice time, percent voiceless time) and perceptually (GRBAS scales) in the first and last session. Dr. Speech (version 4.0, Tiger-DRS) was used to compare acoustic parameters of pre-and post-treatment. Seo Dongil's voice technique consisted of relaxation, breathing exercise and phonation exercise. The results were as follows: First, Seo Dongil's voice technique tented to be effective on decreasing voice break and voice stoppage in patient with adductor spasmodic dysphonia. Second, GRBAS scales showed that Seo Dongil's voice technique was effective on improving voice quality of patient with adductor spasmodic dysphonia.

• 동의생리병리학회지
• /
• 제28권1호
• /
• pp.122-127
• /
• 2014

Fire needling is an acupuncture procedure involving the swift pricking of diseased part with a red hot needle. The purpose of the present study is to report the therapeutic effect of acupuncture and fire needling combined therapy on the frozen shoulder patients. Each of patient received combined therapy of acupuncture and fire needling. Fire needling was carried out 2 or 3 times a week. Shoulder pain was evaluated by measuring visual analoge scale (VAS), range of movement (ROM), and global assessment and grade. All of the patinets treated with combined therapy exhibited decreasing of VAS and grade, increasing of ROM and global assessment.

• 한국농공학회지
• /
• 제45권1호
• /
• pp.45-54
• /
• 2003

The effects of binder content and silica sand content on the durability characteristics of lightweight polymer concretes are examined. As a result, the flame lingering times using unsaturated polyester resin and non-combustible polyester resin were 60∼120 and 0∼4 seconds respectively, and the combustion lengths were 9∼11 mm and 0∼3 mm, respectively. Thus it is believed that the lightweight polymer concrete was incombustible and the light weight polymer concrete in which non-combustible material was added was perfectly non-combustible. The percent of original mass of lightweight polymer concrete, according to the freezing-thawing experiment, was below 0.3 %, which was much less than that of cement concrete. The pluse velocity, for the case of the binder content 28 %, showed the minimum decreasing rate for the lightweight polymer concrete with silica sand content of 50 %. The higher the binder content, the greater the durability. That is much higher than other material and believed that the freezing-thawing was suppressed by a low absorption.

• 상하수도학회지
• /
• 제18권6호
• /
• pp.748-757
• /
• 2004

In this study, we analyzed the sensitivity of parameters which affect the result of ILLUDAS model, in the various rainfall conditions. The three basins including Namgaja, Kings creek, Gray haven were selected for this research. The rainfall conditions are considered in terms of the rainfall frequency, the duration and the distribution. In most cases, the impermeability area ratio, the sewer slope, and the sewer roughness coefficient give more significant effects on the results than others. The results show that as increasing the rainfall frequency, the sensitivity of the parameters, sewer slope and roughness coefficient are rised, while the impermeability area ratio is decreasing. And also, for the duration of rainfall, the impermeability area ratio's sensitivity shows similar tendency. In case of the rainfall distribution, the parameters of the sewer roughness and the impermeability area ratio show more sensitive in Huff distribution. Especially, The impermeability area ratio is the most sensitive parameter in Central blocking and Yen & Chow distributions respectively.

• 디지털산업정보학회논문지
• /
• 제7권2호
• /
• pp.47-58
• /
• 2011

Snoop was suitably designed for wired and wireless network as having snoop agent module in BS(Base Station) which is connecting to both wired and wireless network in order to supplement the problems of TCP. This study examined performance difference by using the web traffic taken wide possession in current internet traffic. The web traffic has greater amount of traffic, shorter life time, and smaller size than other traffics. This study found that snoop producing performance improvement of wireless network in the network mixed with the wired and wireless lead performance loss when transmitting web traffic. This study found that in case of web traffic is transmitted it bring a performance improvement of web traffic as computing BWE((Bandwidth Expansion), and also found that this study prove of performance improvement by decreasing local retranmission.

• 오토저널
• /
• 제9권4호
• /
• pp.41-49
• /
• 1987

It is an experimental study to improve the characteristics of combustion and exhaust emission gas in the gasoline engine. These characteristics are influenced by the fuel droplet size. To improve these characteristics, we make the ultrasonic atomization apparatus, and compare with the commercial carburetor. The results obtained are as follows: 1. Maximum atomization quantity is obtained by the vibrator of resonancy frequency 1.65MHz in the ultrasonic atomization apparatus. 2. With ultrasonic atomization apparatus, more than 99% of atomization rate can be obtained regardless of intake air temperature, velocity, and air-fuel ratio. 3. Atomization rate of the commercial carburetor increases with the air-fuel ratio and intake air temperature. 4. Difference of atomization rate between the ultrasonic atomization apparatus and the commercial carburetor increases with decreasing air-fuel ratio. 5. Droplet size is about 1-5.mu.m at the ultrasonic atomization apparatus, and 80-150.mu.m at the commercial carburetor, which indicates the ultrasonic atomization apparatus is excellent in atomization.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.315-323
• /
• 1998

This study has been conducted to develope the combined heat treating technique of gas carburising - gas nitriding and gas carburising to improve the hot working performance of type H3 hot work tool steel. Case depth and carbrides coarsening were increased with increasing carburising temperature and time, respectively. Surface hardness showed decreasing tendency with increasing 2nd tempering temperature after carburising treatment. After carburising, 2nd treatment at 500 to 600 was chosen according to a hardness demand of final product. High temperature tempering resistance showed more excellent quality during such carburising-nitriding or carburising than complex treatment as after conventional hardening.