• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.241-241
• /
• 2014

$SnO_2-core/Zn-shell$ heteronanowires were fabricated by a two-step process: thermal evaporation of Sn powders and employing a sputtering technique with a Zn target. X-ray diffraction, high-resolution transmission electron microscopy, and EDX spectra coincidentally indicated that the shell layer comprised the Zn phase. From Gaussian deconvolution studies, we observed that photoluminescence (PL) spectra consisted of yellow, green, and ultraviolet (UV) emission bands, regardless of shell-coating. We speculated the possible mechanisms of these emission peaks.

• 천문학회지
• /
• 제27권2호
• /
• pp.191-201
• /
• 1994

We propose to use the entropy of power spectra defined in the frequency domain for the deconvolution of extended images. Spatial correlations requisite for extended sources may be insured by increasing the role of power entropy because the power is just a representation of spatial correlations in the frequency domain. We have derived a semi-analytical solution which is found to severely reduce computing time compared with other iteration schemes. Even though the solution is very similar to the well-known Wiener filter, the regularizingng term in the new expression is so insensitive to the noise characteristics as to assure a stable solution. Applications have been made to the IRAS $60{\mu}m\;and\;100{\mu}m$ images of the dark cloud B34 and the optical CCD image of a solar active region containing a circular sunspot and a small pore.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.839-845
• /
• 2003

This paper introduces multichannel blind source separation (BSS) and multichannel blind deconvolution (MBD) based on higher order statistics of signals from convolutive mixtures. In particular, we are concerned with the case that the number of inputs is the same as the number of outputs. Simulations for two input two output cases are carried out and their performances are assessed. One of the major applications of those sequential algorithms (BSS and MBD) is demonstrated through the fault signal detection from only a single measurement of rotating machine, which offers a certain degree of practicability in the engineering field such as machine health monitoring or condition monitoring.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2015년도 추계학술대회
• /
• pp.114-117
• /
• 2015

본 논문에서는 Non-blind 디컨벌루션 알고리듬 중 하나인 Richardson-Lucy(RL) 디컨벌루션을 영상 분할을 통해 성능을 향상시킨 알고리듬을 제안한다. RL 디컨벌루션은 영상의 크기가 커질수록 연산 양이 크게 증가한다. 따라서 크기가 큰 영상의 RL 디컨벌루션은 계산에 많은 시간을 필요로 한다. 이를 개선하기 위하여 영상을 적절한 크기로 분할하여 각각 RL 디컨벌루션을 계산한다. 또한 분할 시 생기는 왜곡을 줄이기 위해 리플 제거를 위한 알고리듬을 추가한다. 이를 통해 기존의 알고리듬보다 연산 양을 줄여 빠른 RL 디컨벌루션이 가능하도록 개선한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.279-280
• /
• 2007

Airway wall thickness is an important bio-marker for evaluation of pulmonary diseases such as stenosis, bronchiectasis. Nevertheless, an image-based analysis of the airway tree can provide precise and valuable airway size information, quantitative measurement of airway wall thickness in CT images involves various sources of error and uncertainty. So we have developed an accurate airway wall measurement technique for small airways with three-dimensional (3-D) approach. To illustrate performance of these techniques, we used airway phantom that consisted of 4 acryl tubes with various inner and outer diameters. Results show that evaluation of interpolation and deconvolution methods of airways in 3-D CT images, and significant improvement over the full-width-half-maximum method for measurement of not only location of the luminal and outer edge of the airway wall but airway wall thickness.

• 천문학논총
• /
• 제30권2호
• /
• pp.233-234
• /
• 2015

We present results of a new high-resolution spectroscopic study of the RS CVn-type binary system EI Eridani (HD26337). We used high S/N ratio LSD profiles to measure a new RV orbit of the primary component and new orbital parameters. We found evidence of strong spectral line profile variations at time intervals indicating the existence of short-lived (few days) spots on the surface of the primary component. We measured a projected rotation velocity of star of 53.2 km/s.

• 한국광학회지
• /
• 제2권2호
• /
• pp.96-102
• /
• 1991

Monitoring the surface profile real time on the manufacturing line of planar products has been accomplished by employing the scattering of a laser light. The laser beam was focused onto the surface and the direction of the reflected beam was utilized to obtain the slope of the surface facet. By taking data fast enough, it was possible to obtain the microscopic surface structure. The mean roughness thus obtained agreed well with the ones found with the mechanical stylus instrument. There was discrepancy between the two results as to the number of peaks per com. A simple model based on the deconvolution of the raw data was found adequate to improve the agreement to an acceptable level.

• 자원환경지질
• /
• 제28권5호
• /
• pp.487-491
• /
• 1995

음성신호를 임펄스 반응으로 압축시키는데 사용되는 선형예측코드의 다중펄스 방법을 다중반사파를 제거시킬수 있도록 개선시켰다. 다중반사파는 층사이에서 연속 반사에 의해 발생하는 것으로서 탄성파 해석을 어렵게 한다. 본 논문에서는 개선된 다중펄스방법을 이용하여 음원 파형요소를 스파이크로 압축시키고 다중반사파를 제거하도록 하였으며, 지하 정보를 갖고 있는 반사계수 함수의 크기와 위치를 연속 계산방식에 의해 이끌어 냈었다. 개선된 다중펄스 방법의 탄성파 자료에의 적용은 좋은 결과를 보여주고 있다.

• Communications for Statistical Applications and Methods
• /
• 제6권3호
• /
• pp.849-860
• /
• 1999

This paper addresses the issue of estimating regression function with errors in variables using wavelets. We adopt a nonparametric approach in assuming that the regression function has no specific parametric form, To account for errors in covariates deconvolution is involved in the construction of a new class of linear wavelet estimators. using the wavelet characterization of Besov spaces the question of regression estimation with Besov constraint can be reduced to a problem in a space of sequences. Rates of convergence are studied over Besov function classes $B_{spq}$ using $L_2$ error measure. It is shown that the rates of convergence depend on the smoothness s of the regression function and the decay rate of characteristic function of the contaminating error.

• 비파괴검사학회지
• /
• 제22권6호
• /
• pp.627-636
• /
• 2002

Identification and sizing of surface breaking vertical cracks using angle beam ultrasonic testing in practical situation quite often become very difficult tasks due to the presence of non-relevant signals caused by geometric reflectors. The present work introduces effective and systematic approaches to take care of such a difficulty by use oi angle beam ultrasonic testing models that can predict the expected signals from various targets very accurately. Specifically, the model-based TIFD (Technique for Identification of Flaw signals using Deconvolution) is Proposed for the identification of the crack tip signals from the non-relevant geometric reflection signals. In addition, the model-based Size-Amplitude Curve is introduced for the reliable sizing of surface breaking vertical cracks.